2106 | ADC | ARM7 | Atmel | Bootloader | CAN | CrossStudio | CrossWorks | DDS | ECos | Ethernet | ETM | FIFO | FLASH | FPGA | GCC | GDB | GNU | GNUARM | GPIO | I2C | IAP | IAR | JTAG | Kickstart | LCD | Linux | LPC | LPC-E2294 | LPC2000 | LPC2100 | LPC2104 | Lpc2106 | Lpc210x | LPC2114 | LPC2119 | LPC2124 | LPC2129 | Lpc2138 | LPC213x | LPC21xx | LPC2210 | LPC2212 | LPC2214 | LPC2292 | LPC2294 | LPC2xxx | LPC3128 | MCB2100 | Olimex | Philips | PWM | Rowley | RTC | RTOS | SPI | SSP | UART | UART0 | UART1 | ULINK | USB | Watchdog | Wiggler

I'm new to the Arm platform, but not to embedded devices in general. I
am trying to come up with a set of linux tools for use on a PC to
target lpc2138 chips.

I think the $20 Wiggler is a very attractive debugging interface due
to its low cost and the fact that it doesn't use USB (USB support in
linux is pretty thin), but I'm having trouble finding linux-compatible
drivers for Wigglers.

Also, I understand there are problems trying to program flash on the
new lpc21xx chips using wigglers (even under Windows).

Does anyone use linux on a PC platform for development to target chips
like the lpc2138? Do you have to resort to the serial programming
technique every time you want to download a program?

Eric




(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )