2106 | ADC | ARM7 | Atmel | Bootloader | CAN | CrossStudio | CrossWorks | DDS | ECos | Ethernet | ETM | FIFO | FLASH | FPGA | GCC | GDB | GNU | GNUARM | GPIO | I2C | IAP | IAR | JTAG | Kickstart | LCD | Linux | LPC | LPC-E2294 | LPC2000 | LPC2100 | LPC2104 | Lpc2106 | Lpc210x | LPC2114 | LPC2119 | LPC2124 | LPC2129 | Lpc2138 | LPC213x | LPC21xx | LPC2210 | LPC2212 | LPC2214 | LPC2292 | LPC2294 | LPC2xxx | LPC3128 | MCB2100 | Olimex | Philips | PWM | Rowley | RTC | RTOS | SPI | SSP | UART | UART0 | UART1 | ULINK | USB | Watchdog | Wiggler

Not sure is you know this but EPI has seized to
support the Jeenie and recommend the Majic-LX, there
is still some issues with the RTCK when you init. the
LPC2xxx, so you shoud be very careful when you write
the startice.cmd.

regards

Samuel

--- Rob Jansen <rob@rob@...> wrote:

> Does anyone have experience with the Jeeni connected
> to an lpc2xxx?
> I got a Jeeni (from EPI) on my desk but heard that
> it will not connect
> to the lpc2xxx because of the missing RTCK line on
> its JTAG interface.
>
> I was not yet able to verify this myself yet since
> I'm still waiting for
> the software to arrive (someone misplaced the CDs
> ...)
>
> Rob
__________________________________________________
">http://mail.yahoo.com





(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )