27c256 | 4K81H | 68HC11A1 | 68HC11P1 | 68hc24 | 68HC711E9 | 68HC811 | 8255 | A2D | ADC | ADC12138 | Am85C30 | BRCLR | Buffalo | CMOS | EEPROM | EPROM | Ethernet | EVB | EVBU | HC11E1 | HC11E9 | HC711E9 | Horray | ImageCraft | IRQ | Keypad | LCD | MC68HC11D0FN | MC68HC11E1CFU3 | MC68HC11F1 | MC68HC711E9 | MC68HC711E9CFN2 | Microcore11 | Microstamp11 | Minikit | NVRAM | PSD | PSD8xx | PSD9xx | PT1000 | RS232 | RTS | RXD | SPI | SRAM | TXD | Watchdogs | XIRQ

Got the 68hc11A1 to run   [13 Articles]

Well, got it to run. I think that I had a bad RS232 cable. I'd like to have the talker reassembled so it will run on boot-up. I guess I need to have the chip run...

Re: 68hc11 interface with pci bus   [2 Articles]

Dear Mike, These are the requirement that you asked for.. 5 motors , reverse and forward only DC , 5.5 volt What else did you need..? How to connect from print...

Using MC68HC711E9 in place of 68HC11A1 chip?   [8 Articles]

Is it possible to substitue a MC68HC711E9 chip in place of a MC68HC11A1 CPU? If so can it be used as a drop in replacement by writing the appropriate values to t...

Anyone Using Gnu 68HC11 with 68HC11A1 w/64k?   [4 Articles]

I have a 68HC11A1FN microcontroller running at 8Mhz on a MRC-11 board by www.mekatronix.com with 64K ram. Trying to get programs compiled with GNU, loading ...

RE: 68HC11 ADC12138 interface   [5 Articles]

Hi all and Adam, Yes. I used the AD12130 with a 68HC11A1 several years ago. After spending lots of time on the phone with National's technical support, we found ...