27c256 | 4K81H | 68HC11A1 | 68HC11P1 | 68hc24 | 68HC711E9 | 68HC811 | 8255 | A2D | ADC | ADC12138 | Am85C30 | BRCLR | Buffalo | CMOS | EEPROM | EPROM | Ethernet | EVB | EVBU | HC11E1 | HC11E9 | HC711E9 | Horray | ImageCraft | IRQ | Keypad | LCD | MC68HC11D0FN | MC68HC11E1CFU3 | MC68HC11F1 | MC68HC711E9 | MC68HC711E9CFN2 | Microcore11 | Microstamp11 | Minikit | NVRAM | PSD | PSD8xx | PSD9xx | PT1000 | RS232 | RTS | RXD | SPI | SRAM | TXD | Watchdogs | XIRQ

Interfacing MC68HC11F1 with external SRAM   [9 Articles]

I am using MC68HC11F1 in a project. But I am facing siome problem in getting started with hardware interface and programing. I am using JBug11 to communicate wi...

MC68HC11F1 internal EEPROM when for joyride in expanded mode.   [3 Articles]

I have been having problem with MC68HC11F1 in expanded mode. And I have come to conclusive diagnostic. This is my diagnosis. 1. I start the MC68HC11F1 in b...

Re: Input/Output using port A   [2 Articles]

--- In , "cheol1217" wrote: > Q) You are required to read the 8 switches and control the > LEDs using port A in real time. You need to control the...

Re: Attachments

Awake here maybe, but not at the technical request. As for now, 27/06 9.05 am (GMT +8 time zone), there is no reply or answer from them. What is Motorola doing? ...

Re: expanded mode configuration   [3 Articles]

--- In , Naveen P N wrote: > I intended to connect external SRAM (16K) to test out the program > (using GCC C compiler), after it tests ok, the ...

Re: static config reg can not be changed

> Ok, now I remember why I used the approach I did to initialize my > system. > > The procedure I outlined in my earlier message is not the procedure > I...