27c256 | 4K81H | 68HC11A1 | 68HC11P1 | 68hc24 | 68HC711E9 | 68HC811 | 8255 | A2D | ADC | ADC12138 | Am85C30 | BRCLR | Buffalo | CMOS | EEPROM | EPROM | Ethernet | EVB | EVBU | HC11E1 | HC11E9 | HC711E9 | Horray | ImageCraft | IRQ | Keypad | LCD | MC68HC11D0FN | MC68HC11E1CFU3 | MC68HC11F1 | MC68HC711E9 | MC68HC711E9CFN2 | Microcore11 | Microstamp11 | Minikit | NVRAM | PSD | PSD8xx | PSD9xx | PT1000 | RS232 | RTS | RXD | SPI | SRAM | TXD | Watchdogs | XIRQ

using optical encoder for feedback to MicroCore11   [10 Articles]

I am using an optical encoder from Omron (E6A-CW100) as feedback the motor speed to MicroCore11. I am using asm language. I do not know where to start with. Anyone c...

Re: using MicroCore11 instead of Remote Control to Scorpion(motor c...

In a message dated 12/1/04 9:36:32 A.M. Eastern Standard Time, writes: Recently i am using MicroCore11(68HC11) instead of remote control to generate PWM...

using MicroCore11 instead of Remote Control to Scorpion(motor controller)   [2 Articles]

Recently i am using MicroCore11(68HC11) instead of remote control to generate PWM(pulse wide modulation) to Scorpion(a motor controller from robot-power) to co...

Microcore11 EEPROM programming problem   [8 Articles]

Hi, I am working with a Microcore11 board with an HC11 E0 chip. I have been unsuccessfully attempting to reprogram the EEPROM on the board, using both MicroLoad...

MicroCore11 not accepting download   [3 Articles]

Hello, I have a Microcore11 microcontroller module from http://www.technologicalarts.com . I have been extremely pleased with it's performance over the 2 years whic...

Re: using MicroCore11 instead of Remote Control to Scorpion(motor c...

I had try programming it using assemble language (using the follow infomation from http://www.lynxmotion.com/Product.aspx?productID=89&CategoryID=10 ) I did als...

Re: using MicroCore11 instead of Remote Control to Scorpion(motor c...

it sounds like the W part of PWM is missing. there is a variable, it is the duration of the pulse. if you generate 1.0ms pulses the motors should run at -100 spee...

Re: Student Need Help

I will agree with all of this. Yes, You can write the program in C. As Bob mentioned, Technological Arts has a great array of information, downloads, etc. http://www....

Re: Re: Interfacing MC68HC11F1 with external SRAM

I would think that one would need a "Bootloader" program that is first downloaded into the HC11 internal RAM. This program would then execute and send your file to the ...