27c256 | 4K81H | 68HC11A1 | 68HC11P1 | 68hc24 | 68HC711E9 | 68HC811 | 8255 | A2D | ADC | ADC12138 | Am85C30 | BRCLR | Buffalo | CMOS | EEPROM | EPROM | Ethernet | EVB | EVBU | HC11E1 | HC11E9 | HC711E9 | Horray | ImageCraft | IRQ | Keypad | LCD | MC68HC11D0FN | MC68HC11E1CFU3 | MC68HC11F1 | MC68HC711E9 | MC68HC711E9CFN2 | Microcore11 | Microstamp11 | Minikit | NVRAM | PSD | PSD8xx | PSD9xx | PT1000 | RS232 | RTS | RXD | SPI | SRAM | TXD | Watchdogs | XIRQ

Downloading code into Microstamp11   [4 Articles]

Hi, I have a microstamp11 and use Imagecraft's ICC11 compiler and Microload for my software needs. Lately the following phenomenon has been observed: ...

Using parallel LCD with Microstamp11 (68HC11D0)   [4 Articles]

I am rather new to the 68HC11 and microcontrollers in general so I am confused about connecting a parallel LCD with the Microstamp11 from Technological Arts. This...

MicroStamp11 startup problems   [2 Articles]

I am starting out with the Technological Arts MicroStamp11. It looks like it has a lit of potential. I have experience with both Motorola and Intel microprocess...

MicroStamp11 Init Problems?!?   [9 Articles]

Hey All, The problem I am having with my 6811 involves some form of initialization, I think. The problem, specifically, is this: when I remove the microcontroller from the d...

Adapt11   [2 Articles]

Hello I have an adapt11 and i am trying to upload an s19 file to it using microload. I spent alot of time on this with no success. I am using a demo file that ...

Re: HC11 IC2 and IC3 Interrupt Problems (Possibly dealing with ...

>>> I went home and tested about everything that I can possibly imagine out from our discussion today. I even took out all of the interrupts except for the IC2 interrupt. ...

HC11 IC2 and IC3 Interrupt Problems (Possibly dealing with ImageCraft IC11)   [4 Articles]

Hi, I am doing a senior design project at the University of Alabama at Birmingham. I am building a robot, and I am using the microStamp11 chip for some of the robot's...

Re: Re: Microcore11 EEPROM programming problem

No problem. Did you just recently purchase the Microcore11? I have used both the Microcore11, and the Microstamp11 in many projects, the E0 processor works just fine fo...

Re: HC11 IC2 and IC3 Interrupt Problems (Possibly dealing with Imag...

>>> TICK1uS is roughly equal to 128 microSeconds (error in the comment for the code). So, are you saying that only IC1 can get through in that time with the OC4 interrupt ...