27c256 | 4K81H | 68HC11A1 | 68HC11P1 | 68hc24 | 68HC711E9 | 68HC811 | 8255 | A2D | ADC | ADC12138 | Am85C30 | BRCLR | Buffalo | CMOS | EEPROM | EPROM | Ethernet | EVB | EVBU | HC11E1 | HC11E9 | HC711E9 | Horray | ImageCraft | IRQ | Keypad | LCD | MC68HC11D0FN | MC68HC11E1CFU3 | MC68HC11F1 | MC68HC711E9 | MC68HC711E9CFN2 | Microcore11 | Microstamp11 | Minikit | NVRAM | PSD | PSD8xx | PSD9xx | PT1000 | RS232 | RTS | RXD | SPI | SRAM | TXD | Watchdogs | XIRQ

I've been considering moving my higher-needs designs to them, too. They seem to be a much better choice than the HC12. ----- Original Message ----- From: <> To: <> Sent: Wednesday, November 19, 2003 3:47 PM Subject: RE: [m68HC11] 68HC811 [was 68HC24 PRU] > John, you could jump back to motorola with the mc56f8323 flash dsp. I just > got an evaluation board for $79 !! (in the US). Seems to work as > promissed. It has both microcontroller properties and DSP properties. > > Jamie

(You need to be a member of m68hc11 -- send a blank email to m68hc11-subscribe@yahoogroups.com )