27c256 | 4K81H | 68HC11A1 | 68HC11P1 | 68hc24 | 68HC711E9 | 68HC811 | 8255 | A2D | ADC | ADC12138 | Am85C30 | BRCLR | Buffalo | CMOS | EEPROM | EPROM | Ethernet | EVB | EVBU | HC11E1 | HC11E9 | HC711E9 | Horray | ImageCraft | IRQ | Keypad | LCD | MC68HC11D0FN | MC68HC11E1CFU3 | MC68HC11F1 | MC68HC711E9 | MC68HC711E9CFN2 | Microcore11 | Microstamp11 | Minikit | NVRAM | PSD | PSD8xx | PSD9xx | PT1000 | RS232 | RTS | RXD | SPI | SRAM | TXD | Watchdogs | XIRQ

Jamie, Where did you get your $79 evaluation board? Thanks, Emmett Redd Ph.D. mailto: Associate Professor (417)836-5221 Department of Physics, Astronomy, and Material Science Southwest Missouri State University Fax (417)836-6226 901 SOUTH NATIONAL Dept (417)836-5131 SPRINGFIELD, MO 65804 USA > -----Original Message----- > From: [mailto:] > Sent: Wednesday, November 19, 2003 7:48 AM > To: > Subject: RE: [m68HC11] 68HC811 [was 68HC24 PRU] > > John, you could jump back to motorola with the mc56f8323 flash dsp. I just > got an evaluation board for $79 !! (in the US). Seems to work as > promissed. It has both microcontroller properties and DSP properties. > > Jamie > > John Samperi > <samperi@ampertron To: > > ics.com.au> cc: > Subject: RE: [m68HC11] > 68HC811 [was 68HC24 PRU] > 11/19/2003 12:26 > AM > Please respond to > m68HC11 > > At 08:09 PM 18/11/03 -0600, you wrote: > >Regarding the 68HC811-- > > > >There used to be a significant hole in Motorola's line-up, as between > >the 68HC11 product line, and the 68HC12, and a lot of people didn't want > >to make the jump, me included! > > I made the jump, for the past 2 years I have been using the PIC briefly > and then switched entirely to AVRs. > > >The number of us 68HC11 stragglers is continuing to ramp down, and I > >doubt any semi manufacturer could ever be tempted to come out with a new > >variation of the 68HC11.... > > Motorola would get some of my business back if they did...but they have > to hurry up before I convert all of my HC11 libraries to AVR code and > of course they woul have to be competitive and innovative like producing > 20 pins HC11 etc....the last Motorola seminar I attended was pretty much > a waste of time for Australian conditions in my opinion. > Regards > > John Samperi > > ****************************************************** > Ampertronics Pty. Ltd. > 11 Brokenwood Place Baulkham Hills, NSW 2153 AUSTRALIA > Tel. (02) 9674-6495 Fax (02) 9674-8745 > Email: > Website http://ampertronics.com.au > * Electronic Design * Technical Services * Contract Assembly > ****************************************************** > To unsubscribe from this group, send an email to: > ------------------------ Yahoo! Groups Sponsor > > To unsubscribe from this group, send an email to:

(You need to be a member of m68hc11 -- send a blank email to m68hc11-subscribe@yahoogroups.com )