27c256 | 4K81H | 68HC11A1 | 68HC11P1 | 68hc24 | 68HC711E9 | 68HC811 | 8255 | A2D | ADC | ADC12138 | Am85C30 | BRCLR | Buffalo | CMOS | EEPROM | EPROM | Ethernet | EVB | EVBU | HC11E1 | HC11E9 | HC711E9 | Horray | ImageCraft | IRQ | Keypad | LCD | MC68HC11D0FN | MC68HC11E1CFU3 | MC68HC11F1 | MC68HC711E9 | MC68HC711E9CFN2 | Microcore11 | Microstamp11 | Minikit | NVRAM | PSD | PSD8xx | PSD9xx | PT1000 | RS232 | RTS | RXD | SPI | SRAM | TXD | Watchdogs | XIRQ

For the MC68HC11 simply wire-wrap your own board using the schematics from Fig. 2-22 or 2-23 of the Pink Book. All the material you need can come from your junk box or is easily obtainable from http://www.digikey.com It does take some wire-wrap skills but is really quite easy and dirt cheap. For assembler, use the Motorola freeware assembler. For a debugger, get Jbug11 from John Beatty (also freeware). For an integrated C and assembler development system, get ICC11 from ImageCraft about ($150) or consider the Introl tools (the "personal edition" was about $200). http://www.imagecraft.com http://www.introl.com Happy developing, Bob Smith --- Avoid computer viruses, Practice safe hex --- -- Specializing in small, cost effective embedded control systems -- Robert L. (Bob) Smith Smith Machine Works, Inc. 9900 Lumlay Road Richmond, VA 23236 804/745-1065 ----- Original Message ----- From: "ronnie murphy" <> To: <> Sent: Saturday, May 04, 2002 11:48 AM Subject: [m68HC11] (unknown) > What 68hc11 PC eval board would be suggested? I looked at several through > google and they seem to be pretty pricey. I am interested in running some > form of basic, sbasic or as11basic on a control system. Experience with > this or references would be appreciated. > Thanks, > > Leroy > > _________________________________________________________________ > Send and receive Hotmail on your mobile device: http://mobile.msn.com > > To unsubscribe from this group, send an email to:

(You need to be a member of m68hc11 -- send a blank email to m68hc11-subscribe@yahoogroups.com )