27c256 | 4K81H | 68HC11A1 | 68HC11P1 | 68hc24 | 68HC711E9 | 68HC811 | 8255 | A2D | ADC | ADC12138 | Am85C30 | BRCLR | Buffalo | CMOS | EEPROM | EPROM | Ethernet | EVB | EVBU | HC11E1 | HC11E9 | HC711E9 | Horray | ImageCraft | IRQ | Keypad | LCD | MC68HC11D0FN | MC68HC11E1CFU3 | MC68HC11F1 | MC68HC711E9 | MC68HC711E9CFN2 | Microcore11 | Microstamp11 | Minikit | NVRAM | PSD | PSD8xx | PSD9xx | PT1000 | RS232 | RTS | RXD | SPI | SRAM | TXD | Watchdogs | XIRQ

Hi all, Is it possible to use the same code from MC68HC11A1-CFN2 on the MC68HC711E9CFN2? Our programsize is only 500bytes and is located in the EEPROM. We start the device in bootstrap mode and download the program code to eeprom. Because both devices have the same eeprom size, sam RAM size, same location of eeprom. Only the config register differs. Any suggestions? Thanks in advance, Frank [Non-text portions of this message have been removed]

______________________________
Stellaris® MCU Family: New Parts, New Package, New Price.


(You need to be a member of m68hc11 -- send a blank email to m68hc11-subscribe@yahoogroups.com )