Sign in
Search msp430
Subscribe to msp430
Ads
Discussion Groups
MSP430
The purpose of this group is to foster exchange of information on the Texas Instruments MSP430 family of microcontrollers and related tools. Everyone welcome, all levels of familiarity/expertise.
Interrupts [3 Articles]
nagarkarajay - Aug 20 2008
Hello,
I am using an MSP430FE425 processor for a project. I have some
software written that generates a watchdog timer interrupt every so
often , a Basic timer interrupt and an ... 
MSP430F2234 input current problem [8 Articles]
oliver at mettrix - Aug 19 2008
Hello All,
We are working with an MSP430F2234 device and we are using P1.2 as an input to detect a switch closure. The external circuitry has a
5 Meg resistor to Vcc being us... DMX512 using MSP430 [4 Articles]
mfalcone2k - Aug 19 2008
Hello,
Looking for examples of DMX512 protocol receiver "C" code using MSP430.
Thanks
------------------------------------
... Re: Re: Port 2 Interrupt On eZ430-RF2500 Along With The Demo Code
randy ram - Aug 19 2008
I just worked on it more. I got to send me some numbers now when I
actually pull a high on Port4.3. If I leave the port high, the numbers
keep going up. i expect it to still coun... Re: Re: Port 2 Interrupt On eZ430-RF2500 Along With The Demo Code
randy ram - Aug 19 2008
Hi Eddy, I have now placed the pulses to port4.3.(Pin 8 on the ez430
board) I tried out the method, now it does not stop any transmission but
result is still not updating.Here is... Erasing INFO Memory [12 Articles]
marlfox0415 - Aug 18 2008
Hi all,
I'm having some trouble erasing SegmentA and B of the INFO section of
Flash memory on an MSP4301232. I'm using IAR to program it, if that
matters at all. The erase i... SMBus or i2c error [4 Articles]
magzky02 - Aug 17 2008
Hello forumers, I am using MSP430F1610 to communicate with i2c/SMBus
devices. It runs OK when the the i2c devices are working fine. But if
the device is not working/defective... Problems with scanning key on my keypad program [3 Articles]
Eddy - Aug 17 2008
Hi guys,
I am designing a wireless keypad with eZ430-RF2500. I have been using
eZ430-RF2500 demo program and application note SLAA139 as my
foundation. The hardware part is h... Upgraded Kickstart and now the Olimex JTAG-TIny won't work?
Richard Cooke - Aug 17 2008
Hi Folks,
I just updated the IAR free version of the Kickstart IDE/compiler to
version 4.11B but now the Olimex JTAG-Tiny programmer/emulator won't
connect. When I click on t... Reading flash in a DMA int. routine.
Steve Sabram - Aug 16 2008
I have a piece of code that is reading the ADC12 and writing it into
flash via a DMA on the F168. I have an interrupt generated (DACDMA)
after every page is written to check i...