Sign in
Search msp430
Subscribe to msp430
Ads
Discussion Groups
Discussion Groups | MSP430 | ez430 and msp430f5xxx
The purpose of this group is to foster exchange of information on the Texas Instruments MSP430 family of microcontrollers and related tools. Everyone welcome, all levels of familiarity/expertise.
ez430 and msp430f5xxx - mm bb - Sep 8 15:39:00 2008
Hello, is it possible to program a msp430f5438 using the ez430 usb programm=
er? , properly connected to the respective Spy biwire pins =C2=A0or there i=
s some incompatibility, anybody knows if there is a problem with this new m=
icro which is also =C2=A0spw compatible.Because I have the ez430 used with =
the F2xx and=C2=A0 I wanted to try with F5438.
Thanks to all.
Yahoo! Cocina
Recetas pr=C3=A1cticas y comida saludable
http://ar.mujer.yahoo.com/cocina/
[Non-text portions of this message have been removed]
------------------------------------
(You need to be a member of msp430 -- send a blank email to msp430-subscribe@yahoogroups.com )
er? , properly connected to the respective Spy biwire pins =C2=A0or there i=
s some incompatibility, anybody knows if there is a problem with this new m=
icro which is also =C2=A0spw compatible.Because I have the ez430 used with =
the F2xx and=C2=A0 I wanted to try with F5438.
Thanks to all.
Yahoo! Cocina
Recetas pr=C3=A1cticas y comida saludable
http://ar.mujer.yahoo.com/cocina/
[Non-text portions of this message have been removed]
------------------------------------
(You need to be a member of msp430 -- send a blank email to msp430-subscribe@yahoogroups.com )
Re: ez430 and msp430f5xxx - Ian Okey - Sep 8 16:12:36 2008
I have been programming the XSP430F5438 with the USB FET430UIF over the
Spy-BI-Wire interface for a couple of months now. The XSP device is the
prototype silicon that TI have been sending out as samples since June.
There are, as you would expect for prototype silicon, a number of hardware
bugs that you have to be a bit careful of, but for the most part porting to
this device has been relatively pain free.
Ian
2008/9/8 mm bb
> Hello, is it possible to program a msp430f5438 using the ez430 usb
> programmer? , properly connected to the respective Spy biwire pins or th=
ere
> is some incompatibility, anybody knows if there is a problem with this ne=
w
> micro which is also spw compatible.Because I have the ez430 used with th=
e
> F2xx and I wanted to try with F5438.
> Thanks to all.
> Yahoo! Cocina
> Recetas pr=E1cticas y comida saludable
> http://ar.mujer.yahoo.com/cocina/
>
> [Non-text portions of this message have been removed]
> ------------------------------------
(You need to be a member of msp430 -- send a blank email to msp430-subscribe@yahoogroups.com )
Spy-BI-Wire interface for a couple of months now. The XSP device is the
prototype silicon that TI have been sending out as samples since June.
There are, as you would expect for prototype silicon, a number of hardware
bugs that you have to be a bit careful of, but for the most part porting to
this device has been relatively pain free.
Ian
2008/9/8 mm bb
> Hello, is it possible to program a msp430f5438 using the ez430 usb
> programmer? , properly connected to the respective Spy biwire pins or th=
ere
> is some incompatibility, anybody knows if there is a problem with this ne=
w
> micro which is also spw compatible.Because I have the ez430 used with th=
e
> F2xx and I wanted to try with F5438.
> Thanks to all.
> Yahoo! Cocina
> Recetas pr=E1cticas y comida saludable
> http://ar.mujer.yahoo.com/cocina/
>
> [Non-text portions of this message have been removed]
> ------------------------------------
(You need to be a member of msp430 -- send a blank email to msp430-subscribe@yahoogroups.com )
Re: ez430 and msp430f5xxx - datacardio - Sep 8 16:37:36 2008
--- In m...@yahoogroups.com, "Ian Okey" wrote:
>
> I have been programming the XSP430F5438 with the USB FET430UIF=20
over the
> Spy-BI-Wire interface for a couple of months now. The XSP device=20
is the
> prototype silicon that TI have been sending out as samples since=20
June.
>=20
> There are, as you would expect for prototype silicon, a number of=20
hardware
> bugs that you have to be a bit careful of, but for the most part=20
porting to
> this device has been relatively pain free.
>=20
> Ian
>=20
> 2008/9/8 mm bb
>=20
> > Hello, is it possible to program a msp430f5438 using the ez430=20
usb
> > programmer? , properly connected to the respective Spy biwire=20
pins or there
> > is some incompatibility, anybody knows if there is a problem=20
with this new
> > micro which is also spw compatible.Because I have the ez430=20
used with the
> > F2xx and I wanted to try with F5438.
> > Thanks to all.
> >
> >
> > Yahoo! Cocina
> > Recetas pr=E1cticas y comida saludable
> > http://ar.mujer.yahoo.com/cocina/
> >
> > [Non-text portions of this message have been removed]
> >
> >
> > ------------------------------------
> >
> >
> >
> >
(You need to be a member of msp430 -- send a blank email to msp430-subscribe@yahoogroups.com )
>
> I have been programming the XSP430F5438 with the USB FET430UIF=20
over the
> Spy-BI-Wire interface for a couple of months now. The XSP device=20
is the
> prototype silicon that TI have been sending out as samples since=20
June.
>=20
> There are, as you would expect for prototype silicon, a number of=20
hardware
> bugs that you have to be a bit careful of, but for the most part=20
porting to
> this device has been relatively pain free.
>=20
> Ian
>=20
> 2008/9/8 mm bb
>=20
> > Hello, is it possible to program a msp430f5438 using the ez430=20
usb
> > programmer? , properly connected to the respective Spy biwire=20
pins or there
> > is some incompatibility, anybody knows if there is a problem=20
with this new
> > micro which is also spw compatible.Because I have the ez430=20
used with the
> > F2xx and I wanted to try with F5438.
> > Thanks to all.
> >
> >
> > Yahoo! Cocina
> > Recetas pr=E1cticas y comida saludable
> > http://ar.mujer.yahoo.com/cocina/
> >
> > [Non-text portions of this message have been removed]
> >
> >
> > ------------------------------------
> >
> >
> >
> >
(You need to be a member of msp430 -- send a blank email to msp430-subscribe@yahoogroups.com )
Re: Re: ez430 and msp430f5xxx - Ian Okey - Sep 8 16:49:43 2008
2008/9/8 datacardio
> --- In m...@yahoogroups.com, "Ian Okey" wrote:
> >
> > I have been programming the XSP430F5438 with the USB FET430UIF
> over the
> > Spy-BI-Wire interface for a couple of months now. The XSP device
> is the
> > prototype silicon that TI have been sending out as samples since
> June.
> >
> > There are, as you would expect for prototype silicon, a number of
> hardware
> > bugs that you have to be a bit careful of, but for the most part
> porting to
> > this device has been relatively pain free.
> >
> > Ian
> >
> > 2008/9/8 mm bb
> >
> > > Hello, is it possible to program a msp430f5438 using the ez430
> usb
> > > programmer? , properly connected to the respective Spy biwire
> pins or there
> > > is some incompatibility, anybody knows if there is a problem
> with this new
> > > micro which is also spw compatible.Because I have the ez430
> used with the
> > > F2xx and I wanted to try with F5438.
> > > Thanks to all.
> > >
> > >
> > > Yahoo! Cocina
> > > Recetas pr=E1cticas y comida saludable
> > > http://ar.mujer.yahoo.com/cocina/
> > > >
> Thanks for your response, but do you think it is possible to
> programm with the ez430, this is different from FET430UIF?
> Because I m trying to get a connections with this programmer via IAR
> and get the error message device not connected, so it does not
> recognized the chip.Im using one of these XSP430F5438 via spybiwire
> from the ez430.
> You must make sure that the device selected in the IAR toolset project
options page is the XSP device and not the MSP430F5438. You must have
version 4.11 of the tools (latest is 4.11E I think) and there was a mistake
in the device file that stops C-spy from giving read/write access to the
peripheral device registers. I cannot remember exactly where the problem
was but there was an incorrect address range specified. I can find the
details of this tomorrow.
Ian
[Non-text portions of this message have been removed]
------------------------------------
(You need to be a member of msp430 -- send a blank email to msp430-subscribe@yahoogroups.com )
> --- In m...@yahoogroups.com, "Ian Okey"
> >
> > I have been programming the XSP430F5438 with the USB FET430UIF
> over the
> > Spy-BI-Wire interface for a couple of months now. The XSP device
> is the
> > prototype silicon that TI have been sending out as samples since
> June.
> >
> > There are, as you would expect for prototype silicon, a number of
> hardware
> > bugs that you have to be a bit careful of, but for the most part
> porting to
> > this device has been relatively pain free.
> >
> > Ian
> >
> > 2008/9/8 mm bb
> >
> > > Hello, is it possible to program a msp430f5438 using the ez430
> usb
> > > programmer? , properly connected to the respective Spy biwire
> pins or there
> > > is some incompatibility, anybody knows if there is a problem
> with this new
> > > micro which is also spw compatible.Because I have the ez430
> used with the
> > > F2xx and I wanted to try with F5438.
> > > Thanks to all.
> > >
> > >
> > > Yahoo! Cocina
> > > Recetas pr=E1cticas y comida saludable
> > > http://ar.mujer.yahoo.com/cocina/
> > > >
> Thanks for your response, but do you think it is possible to
> programm with the ez430, this is different from FET430UIF?
> Because I m trying to get a connections with this programmer via IAR
> and get the error message device not connected, so it does not
> recognized the chip.Im using one of these XSP430F5438 via spybiwire
> from the ez430.
> You must make sure that the device selected in the IAR toolset project
options page is the XSP device and not the MSP430F5438. You must have
version 4.11 of the tools (latest is 4.11E I think) and there was a mistake
in the device file that stops C-spy from giving read/write access to the
peripheral device registers. I cannot remember exactly where the problem
was but there was an incorrect address range specified. I can find the
details of this tomorrow.
Ian
[Non-text portions of this message have been removed]
------------------------------------
(You need to be a member of msp430 -- send a blank email to msp430-subscribe@yahoogroups.com )
Re: ez430 and msp430f5xxx - p_murayama - Sep 8 18:52:36 2008
Hello!
I wanted to try the same thing, but I have just been told by TI (Japan) tha=
t it is
not compatible. I have no further detail.
Pascal
--- In m...@yahoogroups.com, mm bb wrote:
>
> Hello, is it possible to program a msp430f5438 using the ez430 usb progra=
mmer? ,=20
properly connected to the respective Spy biwire pins =C2=A0or there is some=
incompatibility,=20
anybody knows if there is a problem with this new micro which is also =C2=
=A0spw=20
compatible.Because I have the ez430 used with the F2xx and=C2=A0 I wanted t=
o try with F5438.
> Thanks to all.
>=20
>=20
> Yahoo! Cocina
> Recetas pr=C3=A1cticas y comida saludable
> http://ar.mujer.yahoo.com/cocina/
>=20
> [Non-text portions of this message have been removed]
>
------------------------------------
(You need to be a member of msp430 -- send a blank email to msp430-subscribe@yahoogroups.com )
I wanted to try the same thing, but I have just been told by TI (Japan) tha=
t it is
not compatible. I have no further detail.
Pascal
--- In m...@yahoogroups.com, mm bb
>
> Hello, is it possible to program a msp430f5438 using the ez430 usb progra=
mmer? ,=20
properly connected to the respective Spy biwire pins =C2=A0or there is some=
incompatibility,=20
anybody knows if there is a problem with this new micro which is also =C2=
=A0spw=20
compatible.Because I have the ez430 used with the F2xx and=C2=A0 I wanted t=
o try with F5438.
> Thanks to all.
>=20
>=20
> Yahoo! Cocina
> Recetas pr=C3=A1cticas y comida saludable
> http://ar.mujer.yahoo.com/cocina/
>=20
> [Non-text portions of this message have been removed]
>
------------------------------------
(You need to be a member of msp430 -- send a blank email to msp430-subscribe@yahoogroups.com )
Re: ez430 and msp430f5xxx - datacardio - Sep 9 10:57:35 2008
--- In m...@yahoogroups.com, "p_murayama" wrote:
>
> Hello!
>=20
> I wanted to try the same thing, but I have just been told by TI=20
(Japan) that it is
> not compatible. I have no further detail.
>=20
> Pascal
>=20
> --- In m...@yahoogroups.com, mm bb wrote:
> >
> > Hello, is it possible to program a msp430f5438 using the ez430=20
usb programmer? ,=20
> properly connected to the respective Spy biwire pins =C2=A0or there is=20
some incompatibility,=20
> anybody knows if there is a problem with this new micro which is=20
also =C2=A0spw=20
> compatible.Because I have the ez430 used with the F2xx and=C2=A0 I=20
wanted to try with F5438.
> > Thanks to all.
> >=20
> >=20
> > Yahoo! Cocina
> > Recetas pr=C3=A1cticas y comida saludable
> > http://ar.mujer.yahoo.com/cocina/
> >=20
> > [Non-text portions of this message have been removed]
> How do you resolve the problem, do you use other programmer?
------------------------------------
(You need to be a member of msp430 -- send a blank email to msp430-subscribe@yahoogroups.com )
>
> Hello!
>=20
> I wanted to try the same thing, but I have just been told by TI=20
(Japan) that it is
> not compatible. I have no further detail.
>=20
> Pascal
>=20
> --- In m...@yahoogroups.com, mm bb
> >
> > Hello, is it possible to program a msp430f5438 using the ez430=20
usb programmer? ,=20
> properly connected to the respective Spy biwire pins =C2=A0or there is=20
some incompatibility,=20
> anybody knows if there is a problem with this new micro which is=20
also =C2=A0spw=20
> compatible.Because I have the ez430 used with the F2xx and=C2=A0 I=20
wanted to try with F5438.
> > Thanks to all.
> >=20
> >=20
> > Yahoo! Cocina
> > Recetas pr=C3=A1cticas y comida saludable
> > http://ar.mujer.yahoo.com/cocina/
> >=20
> > [Non-text portions of this message have been removed]
> How do you resolve the problem, do you use other programmer?
------------------------------------
(You need to be a member of msp430 -- send a blank email to msp430-subscribe@yahoogroups.com )
Re: ez430 and msp430f5xxx - old_cow_yellow - Sep 9 11:22:51 2008
You can use FET430UIF.
Hardware wise, eZ430U should have worked. But it does not. This is due
to either the DLL inside PC or the firmware inside eZ430U.
--- In m...@yahoogroups.com, "datacardio" wrote:
>
> How do you resolve the problem, do you use other programmer?
>
> --- In m...@yahoogroups.com, "p_murayama" wrote:
> >
> > Hello!
> >
> > I wanted to try the same thing, but I have just been told by TI
> (Japan) that it is
> > not compatible. I have no further detail.
> >
> > Pascal
> >
------------------------------------
(You need to be a member of msp430 -- send a blank email to msp430-subscribe@yahoogroups.com )
Hardware wise, eZ430U should have worked. But it does not. This is due
to either the DLL inside PC or the firmware inside eZ430U.
--- In m...@yahoogroups.com, "datacardio"
>
> How do you resolve the problem, do you use other programmer?
>
> --- In m...@yahoogroups.com, "p_murayama"
> >
> > Hello!
> >
> > I wanted to try the same thing, but I have just been told by TI
> (Japan) that it is
> > not compatible. I have no further detail.
> >
> > Pascal
> >
------------------------------------
(You need to be a member of msp430 -- send a blank email to msp430-subscribe@yahoogroups.com )