All

You may have seen my previous post where I mentioned I had a 'dead' MSP-FET430UIF and TI have just sent me another that only works with Kickstart 3.4 and above.

Does anyone have a early MSP-FET430UIF (released around 2004 and which works properly (and has been tested) with Kickstart 3.21) that I can either purchase or copy the firmware from (this has to be both the MSP and TUSB firmware within)?

I will pay all associated charges.

Rgds
Ralph

------------------------------------



(You need to be a member of msp430 -- send a blank email to msp430-subscribe@yahoogroups.com )

Try It http://rapidshare.com/files/240708134/fet430uif.rar.html

On Thu, Jun 4, 2009 at 6:33 PM, Ralph wrote:

> All
>
> You may have seen my previous post where I mentioned I had a 'dead'
> MSP-FET430UIF and TI have just sent me another that only works with
> Kickstart 3.4 and above.
>
> Does anyone have a early MSP-FET430UIF (released around 2004 and which
> works properly (and has been tested) with Kickstart 3.21) that I can either
> purchase or copy the firmware from (this has to be both the MSP and TUSB
> firmware within)?
>
> I will pay all associated charges.
>
> Rgds
> Ralph
>
>
>

--
http://www.micro4you.com -> Eelectronics and Microcontroller Shop
http://stores.ebay.com/Micro4you-Store -> Ebay Store
http://www.friendlyarm.com -> Eelectronics and Microcontroller Blog
[Non-text portions of this message have been removed]

------------------------------------

______________________________
Stellaris® MCU Family: New Parts, New Package, New Price.


(You need to be a member of msp430 -- send a blank email to msp430-subscribe@yahoogroups.com )

Hi Ralph, I was the TI MSP430 Apps engineer for the Northeast US and Canada until about 3 years ago... I still have a copy of the MSP430 UIF firmware. Send me an email, and I'll send it to you. Sorry, don't have the TUSB code.

I'm not sure how far back version 3.21 was... I'm guessing it was late 2004 or early 2005. I still have copies of all the compilers (I'm a packrat!), but would have to install them to see the version numbers).

I may have a UIF that goes back that far, but not sure if there's a way to easily tell what software is in there. Shoot me an email and we'll work something out.

Mike Kaelin
Kaelin Consulting
m...@kaelinconsulting.com
--- In m...@yahoogroups.com, "Ralph" wrote:
>
> All
>
> You may have seen my previous post where I mentioned I had a 'dead' MSP-FET430UIF and TI have just sent me another that only works with Kickstart 3.4 and above.
>
> Does anyone have a early MSP-FET430UIF (released around 2004 and which works properly (and has been tested) with Kickstart 3.21) that I can either purchase or copy the firmware from (this has to be both the MSP and TUSB firmware within)?
>
> I will pay all associated charges.
>
> Rgds
> Ralph
>

------------------------------------



(You need to be a member of msp430 -- send a blank email to msp430-subscribe@yahoogroups.com )

Thanks Mike
=A0
Somboon sent me a link to=A0the=A0MSP firmware and I received the TUSB code=
from another source. My FET is alive once again (after a week of tearing m=
y hair out) and I have backed it up several times. I will keep your contact=
details because I suspect there are few people that actually know what rea=
lly happens when you accidentally press upgrade firmware, especially when u=
sing Code Composer.
=A0
Thanks again everyone.
=A0
Regds
Ralph

--- On Thu, 4/6/09, Mike wrote:
From: Mike
Subject: [msp430] Re: Does anyone have an early MSP-FET430UIF for sale or o=
ne I can get firmware from?
To: m...@yahoogroups.com
Date: Thursday, 4 June, 2009, 3:49 PM

Hi Ralph, I was the TI MSP430 Apps engineer for the Northeast US and Canada=
until about 3 years ago... I still have a copy of the MSP430 UIF firmware.=
Send me an email, and I'll send it to you. Sorry, don't have the TUSB code=
.=20

I'm not sure how far back version 3.21 was... I'm guessing it was late 2004=
or early 2005. I still have copies of all the compilers (I'm a packrat!), =
but would have to install them to see the version numbers).=20

I may have a UIF that goes back that far, but not sure if there's a way to =
easily tell what software is in there. Shoot me an email and we'll work som=
ething out.=20

Mike Kaelin
Kaelin Consulting
mike@kaelinconsulti ng.com

--- In msp430@yahoogroups. com, "Ralph" wrote:
>
> All
>=20
> You may have seen my previous post where I mentioned I had a 'dead' MSP-F=
ET430UIF and TI have just sent me another that only works with Kickstart 3.=
4 and above.
>=20
> Does anyone have a early MSP-FET430UIF (released around 2004 and which wo=
rks properly (and has been tested) with Kickstart 3.21) that I can either p=
urchase or copy the firmware from (this has to be both the MSP and TUSB fir=
mware within)?
>=20
> I will pay all associated charges.
>=20
> Rgds
> Ralph
>

=20=20=20=20=20=20

[Non-text portions of this message have been removed]

------------------------------------



(You need to be a member of msp430 -- send a blank email to msp430-subscribe@yahoogroups.com )

Hi Ralph
Your welcome. I received this file from my friend. I have a little question.
How to convert .txt to .hex ?

Best Regards
somboon

On Thu, Jun 4, 2009 at 10:08 PM, Ralph wrote:

> Thanks Mike
>
> Somboon sent me a link to the MSP firmware and I received the TUSB code
> from another source. My FET is alive once again (after a week of tearing my
> hair out) and I have backed it up several times. I will keep your contact
> details because I suspect there are few people that actually know what
> really happens when you accidentally press upgrade firmware, especially when
> using Code Composer.
>
> Thanks again everyone.
>
> Regds
> Ralph
>
> --- On Thu, 4/6/09, Mike > wrote:
>
> From: Mike >
> Subject: [msp430] Re: Does anyone have an early MSP-FET430UIF for sale or
> one I can get firmware from?
> To: m...@yahoogroups.com
> Date: Thursday, 4 June, 2009, 3:49 PM
> Hi Ralph, I was the TI MSP430 Apps engineer for the Northeast US and Canada
> until about 3 years ago... I still have a copy of the MSP430 UIF firmware.
> Send me an email, and I'll send it to you. Sorry, don't have the TUSB code.
>
> I'm not sure how far back version 3.21 was... I'm guessing it was late 2004
> or early 2005. I still have copies of all the compilers (I'm a packrat!),
> but would have to install them to see the version numbers).
>
> I may have a UIF that goes back that far, but not sure if there's a way to
> easily tell what software is in there. Shoot me an email and we'll work
> something out.
>
> Mike Kaelin
> Kaelin Consulting
> mike@kaelinconsulti ng.com
>
> --- In msp430@yahoogroups. com, "Ralph" wrote:
> >
> > All
> >
> > You may have seen my previous post where I mentioned I had a 'dead'
> MSP-FET430UIF and TI have just sent me another that only works with
> Kickstart 3.4 and above.
> >
> > Does anyone have a early MSP-FET430UIF (released around 2004 and which
> works properly (and has been tested) with Kickstart 3.21) that I can either
> purchase or copy the firmware from (this has to be both the MSP and TUSB
> firmware within)?
> >
> > I will pay all associated charges.
> >
> > Rgds
> > Ralph
> > [Non-text portions of this message have been removed]
>
>
>

--
http://www.micro4you.com -> Eelectronics and Microcontroller Shop
http://stores.ebay.com/Micro4you-Store -> Ebay Store
http://www.friendlyarm.com -> Eelectronics and Microcontroller Blog
[Non-text portions of this message have been removed]

------------------------------------



(You need to be a member of msp430 -- send a blank email to msp430-subscribe@yahoogroups.com )