Sign in
Search msp430
Subscribe to msp430
Ads
Discussion Groups
See Also
Discussion Groups | MSP430 | Olimex 449STK-B
The purpose of this group is to foster exchange of information on the Texas Instruments MSP430 family of microcontrollers and related tools. Everyone welcome, all levels of familiarity/expertise.
Olimex 449STK-B - Vern VanZ - Oct 26 2:17:44 2009
Greetings all,
Anyone out there still using a 449STK-B version from Olimex? If so, do you have a schematic and or code that works with the LCD (and you'd be willing to share)? This particular
STK was available from sometime in 2003 until the '449STK2' was released... I have code that was written for a Varitronix VI-302-DP-S that sort of works, but doesn't seem to access the left most digit of the 3.5 digit display (i.e. - '1'). I've been able to figure out the other things like the decimal points, plus/minus sign and 'LOWBAT'. The LCD used on the MSP430-449STK-B appears to be similar, but not quite similar enough... Any assistance would be welcome.
TIA,
-Vern
------------------------------------
(You need to be a member of msp430 -- send a blank email to msp430-subscribe@yahoogroups.com )
Anyone out there still using a 449STK-B version from Olimex? If so, do you have a schematic and or code that works with the LCD (and you'd be willing to share)? This particular
STK was available from sometime in 2003 until the '449STK2' was released... I have code that was written for a Varitronix VI-302-DP-S that sort of works, but doesn't seem to access the left most digit of the 3.5 digit display (i.e. - '1'). I've been able to figure out the other things like the decimal points, plus/minus sign and 'LOWBAT'. The LCD used on the MSP430-449STK-B appears to be similar, but not quite similar enough... Any assistance would be welcome.
TIA,
-Vern
------------------------------------
(You need to be a member of msp430 -- send a blank email to msp430-subscribe@yahoogroups.com )
Re: Olimex 449STK-B - Vern VanZ - Oct 29 18:05:30 2009
Found a schematic and header files for the old version 'B' STK. Turns out I had it all
along! :\
...Should anyone still be looking for this info, email me and will arrange to send you a copy... -V
________________________________
From: Vern VanZ
To: m...@yahoogroups.com
Sent: Sun, October 25, 2009 7:04:45 PM
Subject: [msp430] Olimex 449STK-B
Greetings all,
Anyone out there still using a 449STK-B version from Olimex? If so, do you have a schematic and or code that works with the LCD (and you'd be willing to share)? This particular
STK was available from sometime in 2003 until the '449STK2' was released... I have code that was written for a Varitronix VI-302-DP-S that sort of works, but doesn't seem to access the left most digit of the 3.5 digit display (i.e. - '1'). I've been able to figure out the other things like the decimal points, plus/minus sign and 'LOWBAT'. The LCD used on the MSP430-449STK- B appears to be similar, but not quite similar enough... Any assistance would be welcome.
TIA,
-Vern
[Non-text portions of this message have been removed]
------------------------------------
(You need to be a member of msp430 -- send a blank email to msp430-subscribe@yahoogroups.com )
...Should anyone still be looking for this info, email me and will arrange to send you a copy... -V
________________________________
From: Vern VanZ
To: m...@yahoogroups.com
Sent: Sun, October 25, 2009 7:04:45 PM
Subject: [msp430] Olimex 449STK-B
Greetings all,
Anyone out there still using a 449STK-B version from Olimex? If so, do you have a schematic and or code that works with the LCD (and you'd be willing to share)? This particular
STK was available from sometime in 2003 until the '449STK2' was released... I have code that was written for a Varitronix VI-302-DP-S that sort of works, but doesn't seem to access the left most digit of the 3.5 digit display (i.e. - '1'). I've been able to figure out the other things like the decimal points, plus/minus sign and 'LOWBAT'. The LCD used on the MSP430-449STK- B appears to be similar, but not quite similar enough... Any assistance would be welcome.
TIA,
-Vern
[Non-text portions of this message have been removed]
------------------------------------
(You need to be a member of msp430 -- send a blank email to msp430-subscribe@yahoogroups.com )