Sign in

Not a member? | Forgot your Password?


Search msp430

Search tips

Subscribe to msp430

Free PDF Downloads

Beginning Microcontrollers with the MSP430

Advanced Linux Programming

What Every Programmer Should Know About Memory

Introduction to Embedded Systems

C++ Tutorial

Embedded Systems - Theory and Design Methodology

Microcontroller Programming and Interfacing

Introduction to Microcontrollers


More Free PDF Downloads

Discussion Groups

See Also

ElectronicsDSPFPGA

Find us on Facebook





Discussion Groups | MSP430 | LaunchPad shipping with MSP430G2553

The purpose of this group is to foster exchange of information on the Texas Instruments MSP430 family of microcontrollers and related tools. Everyone welcome, all levels of familiarity/expertise.

LaunchPad shipping with MSP430G2553 - Jim - Dec 6 2:41:16 2011

I ordered another LaunchPad from TI on Nov 29 and was pleasantly suprised when it arrived on Dec 2, populated with a 20-pin PDIP MSP430G2553, and a spare MSP430G2452. The G2553 has 16K FLASH, 512 Bytes SRAM, 2 16-bit timers, USCI_A (UART/IrDA/SPI), USCI_B(SPI/I2C), 8 Comparators, Temp Sensor, and 8-chan 10-bit SAR ADC. In other words, enough FLASH, RAM & peripherals to get into some fairly complex projects!

I had bought a couple of LaunchPads, about a year ago, which came with the MSP430G2231/G2211 chips. These were very limiting in capability, so, as soon as I found out the G2553 was available, I ordered samples to populate both of the original LaunchPads. I have used them to play around with CCS and GRACE, learning to configure the peripherals and to develop sw algorithms and routines. This is directly compatible with and transferrable to a larger MSP430F2618, on which I am developing an application that is far beyond the capabilities of the LaunchPad.

I just thought others might be interested in knowing that the new LaunchPads are shipping with much higher capacity chips!

Jim Smith



Re: LaunchPad shipping with MSP430G2553 - carl...@yahoo.com - Dec 6 4:23:41 2011

Where did you order from? Digikey? Newark?

Thanks
Sent via BlackBerry from T-Mobile

-----Original Message-----
From: "Jim"
Sender: m...
Date: Tue, 06 Dec 2011 07:40:58
To:
Reply-To: m...
Subject: [msp430] LaunchPad shipping with MSP430G2553

I ordered another LaunchPad from TI on Nov 29 and was pleasantly suprised when it arrived on Dec 2, populated with a 20-pin PDIP MSP430G2553, and a spare MSP430G2452. The G2553 has 16K FLASH, 512 Bytes SRAM, 2 16-bit timers, USCI_A (UART/IrDA/SPI), USCI_B(SPI/I2C), 8 Comparators, Temp Sensor, and 8-chan 10-bit SAR ADC. In other words, enough FLASH, RAM & peripherals to get into some fairly complex projects!

I had bought a couple of LaunchPads, about a year ago, which came with the MSP430G2231/G2211 chips. These were very limiting in capability, so, as soon as I found out the G2553 was available, I ordered samples to populate both of the original LaunchPads. I have used them to play around with CCS and GRACE, learning to configure the peripherals and to develop sw algorithms and routines. This is directly compatible with and transferrable to a larger MSP430F2618, on which I am developing an application that is far beyond the capabilities of the LaunchPad.

I just thought others might be interested in knowing that the new LaunchPads are shipping with much higher capacity chips!

Jim Smith





RE: [msp430] LaunchPad shipping with MSP430G2553 - chang luke - Dec 6 4:35:36 2011

What's the price of this Launchpad populated with MSP430G2553?  I've designed a forth assembler/compiler/decompiler+tinyForth which can play with it. It's fun and joyable.

--- 11/12/6 (二),Jim 寫道:
寄件者: Jim
主旨: [msp430] LaunchPad shipping with MSP430G2553
收件者: m...
日期: 2011年12月6日,二,下午3:40

 

I ordered another LaunchPad from TI on Nov 29 and was pleasantly suprised when it arrived on Dec 2, populated with a 20-pin PDIP MSP430G2553, and a spare MSP430G2452. The G2553 has 16K FLASH, 512 Bytes SRAM, 2 16-bit timers, USCI_A (UART/IrDA/SPI), USCI_B(SPI/I2C), 8 Comparators, Temp Sensor, and 8-chan 10-bit SAR ADC. In other words, enough FLASH, RAM & peripherals to get into some fairly complex projects!

I had bought a couple of LaunchPads, about a year ago, which came with the MSP430G2231/G2211 chips. These were very limiting in capability, so, as soon as I found out the G2553 was available, I ordered samples to populate both of the original LaunchPads. I have used them to play around with CCS and GRACE, learning to configure the peripherals and to develop sw algorithms and routines. This is directly compatible with and transferrable to a larger MSP430F2618, on which I am developing an application that is far beyond the capabilities of the LaunchPad.

I just thought others might be interested in knowing that the new LaunchPads are shipping with much higher capacity chips!

Jim Smith




_____________________________
 Free pdf download: Beginning Microcontrollers with the MSP430.


Re: LaunchPad shipping with MSP430G2553 - Leon Heller - Dec 6 6:37:45 2011

On 06/12/2011 07:40, Jim wrote:
> I ordered another LaunchPad from TI on Nov 29 and was pleasantly
> suprised when it arrived on Dec 2, populated with a 20-pin PDIP
> MSP430G2553, and a spare MSP430G2452. The G2553 has 16K FLASH, 512 Bytes
> SRAM, 2 16-bit timers, USCI_A (UART/IrDA/SPI), USCI_B(SPI/I2C), 8
> Comparators, Temp Sensor, and 8-chan 10-bit SAR ADC. In other words,
> enough FLASH, RAM & peripherals to get into some fairly complex projects!

Digi-Key has the chips in stock, but they aren't available from any UK
suppliers yet. I might order a couple of samples for my Launchpads.

Another interesting feature is the touch sensor inputs.

Leon
--
Leon Heller
G1HSM


Re: LaunchPad shipping with MSP430G2553 - Jim Smith - Dec 6 9:05:47 2011

I requested samples of the MSP430G2553 chips, directly from TI, earlier this
year and was shipped two of them, free.

Jim Smith

From: m... [mailto:m...] On Behalf Of
Leon Heller
Sent: Tuesday, December 06, 2011 6:38 AM
To: m...
Subject: Re: [msp430] LaunchPad shipping with MSP430G2553

On 06/12/2011 07:40, Jim wrote:
> I ordered another LaunchPad from TI on Nov 29 and was pleasantly
> suprised when it arrived on Dec 2, populated with a 20-pin PDIP
> MSP430G2553, and a spare MSP430G2452. The G2553 has 16K FLASH, 512 Bytes
> SRAM, 2 16-bit timers, USCI_A (UART/IrDA/SPI), USCI_B(SPI/I2C), 8
> Comparators, Temp Sensor, and 8-chan 10-bit SAR ADC. In other words,
> enough FLASH, RAM & peripherals to get into some fairly complex projects!

Digi-Key has the chips in stock, but they aren't available from any UK
suppliers yet. I might order a couple of samples for my Launchpads.

Another interesting feature is the touch sensor inputs.

Leon
--
Leon Heller
G1HSM





Re: LaunchPad shipping with MSP430G2553 - Jim Smith - Dec 6 9:09:48 2011

I ordered the LaunchPad directly from TI. Price is $4.30, and shipping is free (in US, that is, don't know about elsewhere).
Jim Smith

Sent from my iPhone

On Dec 6, 2011, at 4:23 AM, c...@yahoo.com wrote:

> Where did you order from? Digikey? Newark?
>
> Thanks
> Sent via BlackBerry from T-Mobile
>
> -----Original Message-----
> From: "Jim"
> Sender: m...
> Date: Tue, 06 Dec 2011 07:40:58
> To:
> Reply-To: m...
> Subject: [msp430] LaunchPad shipping with MSP430G2553
>
> I ordered another LaunchPad from TI on Nov 29 and was pleasantly suprised when it arrived on Dec 2, populated with a 20-pin PDIP MSP430G2553, and a spare MSP430G2452. The G2553 has 16K FLASH, 512 Bytes SRAM, 2 16-bit timers, USCI_A (UART/IrDA/SPI), USCI_B(SPI/I2C), 8 Comparators, Temp Sensor, and 8-chan 10-bit SAR ADC. In other words, enough FLASH, RAM & peripherals to get into some fairly complex projects!
>
> I had bought a couple of LaunchPads, about a year ago, which came with the MSP430G2231/G2211 chips. These were very limiting in capability, so, as soon as I found out the G2553 was available, I ordered samples to populate both of the original LaunchPads. I have used them to play around with CCS and GRACE, learning to configure the peripherals and to develop sw algorithms and routines. This is directly compatible with and transferrable to a larger MSP430F2618, on which I am developing an application that is far beyond the capabilities of the LaunchPad.
>
> I just thought others might be interested in knowing that the new LaunchPads are shipping with much higher capacity chips!
>
> Jim Smith
>




Re: RE: LaunchPad shipping with MSP430G2553 - Jim Smith - Dec 6 9:14:00 2011

I ordered the LaunchPad directly from TI. Price is $4.30, and shipping is free (in US, that is, don't know about elsewhere).
Jim Smith

Sent from my iPhone

On Dec 6, 2011, at 4:35 AM, chang luke wrote:

> What's the price of this Launchpad populated with MSP430G2553? I've designed a forth assembler/compiler/decompiler+tinyForth which can play with it. It's fun and joyable.
>
> --- 11/12/6 (二),Jim 寫道:
>
> 寄件者: Jim
> 主旨: [msp430] LaunchPad shipping with MSP430G2553
> 收件者: m...
> 日期: 2011年12月6日,二,下午3:40
>
>
>
> I ordered another LaunchPad from TI on Nov 29 and was pleasantly suprised when it arrived on Dec 2, populated with a 20-pin PDIP MSP430G2553, and a spare MSP430G2452. The G2553 has 16K FLASH, 512 Bytes SRAM, 2 16-bit timers, USCI_A (UART/IrDA/SPI), USCI_B(SPI/I2C), 8 Comparators, Temp Sensor, and 8-chan 10-bit SAR ADC. In other words, enough FLASH, RAM & peripherals to get into some fairly complex projects!
>
> I had bought a couple of LaunchPads, about a year ago, which came with the MSP430G2231/G2211 chips. These were very limiting in capability, so, as soon as I found out the G2553 was available, I ordered samples to populate both of the original LaunchPads. I have used them to play around with CCS and GRACE, learning to configure the peripherals and to develop sw algorithms and routines. This is directly compatible with and transferrable to a larger MSP430F2618, on which I am developing an application that is far beyond the capabilities of the LaunchPad.
>
> I just thought others might be interested in knowing that the new LaunchPads are shipping with much higher capacity chips!
>
> Jim Smith
>
>
>
>



_____________________________
 Free pdf download: Beginning Microcontrollers with the MSP430.