Sign in
Search oopic
Subscribe to oopic
Ads
Discussion Groups
Discussion Groups | | Stepper Motor Question
Stepper Motor Question - jon_mark_go - Apr 17 14:14:56 2008
Will this motor:
http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=403-1006-ND
work with this driver chip:
http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=497-2936-5-ND
?
------------------------------------
(You need to be a member of oopic -- send a blank email to oopic-subscribe@yahoogroups.com )
http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=403-1006-ND
work with this driver chip:
http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=497-2936-5-ND
?
------------------------------------
(You need to be a member of oopic -- send a blank email to oopic-subscribe@yahoogroups.com )
Re: Stepper Motor Question - ooPIC Tech Support - Apr 18 0:14:36 2008
Marginally. Do you understand how steppers work? This one looks like
worst case, depending upon the model is nearly 500mA at 5V - At 12V
stall current is closer to 1Amp. The L293D will work OK with the
former, but it'll be close, and not at all with the latter.
DLC
jon_mark_go wrote:
> Will this motor:
> http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=403-1006-ND
> work with this driver chip:
> http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=497-2936-5-ND
> ?
> ------------------------------------
(You need to be a member of oopic -- send a blank email to oopic-subscribe@yahoogroups.com )
worst case, depending upon the model is nearly 500mA at 5V - At 12V
stall current is closer to 1Amp. The L293D will work OK with the
former, but it'll be close, and not at all with the latter.
DLC
jon_mark_go wrote:
> Will this motor:
> http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=403-1006-ND
> work with this driver chip:
> http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=497-2936-5-ND
> ?
> ------------------------------------
(You need to be a member of oopic -- send a blank email to oopic-subscribe@yahoogroups.com )
Re: Stepper Motor Question - jon_mark_go - Apr 18 9:15:02 2008
I understand how stepper motors work but not really the
purpose/workings of the drive chips. Could you recommend a drive chip
that works with those motors and the OOPic?
------------------------------------
(You need to be a member of oopic -- send a blank email to oopic-subscribe@yahoogroups.com )
purpose/workings of the drive chips. Could you recommend a drive chip
that works with those motors and the OOPic?
------------------------------------
(You need to be a member of oopic -- send a blank email to oopic-subscribe@yahoogroups.com )
Re: Re: Stepper Motor Question - ooPIC Tech Support - Apr 18 23:27:24 2008
If you are going to use the bipolar mode then I'd use the L298 chip.
DLC
jon_mark_go wrote:
> I understand how stepper motors work but not really the
> purpose/workings of the drive chips. Could you recommend a drive chip
> that works with those motors and the OOPic?
> ------------------------------------
(You need to be a member of oopic -- send a blank email to oopic-subscribe@yahoogroups.com )
DLC
jon_mark_go wrote:
> I understand how stepper motors work but not really the
> purpose/workings of the drive chips. Could you recommend a drive chip
> that works with those motors and the OOPic?
> ------------------------------------
(You need to be a member of oopic -- send a blank email to oopic-subscribe@yahoogroups.com )
Re: Stepper Motor Question - jon_mark_go - Apr 19 1:40:12 2008
Thanks.
------------------------------------
(You need to be a member of oopic -- send a blank email to oopic-subscribe@yahoogroups.com )
------------------------------------
(You need to be a member of oopic -- send a blank email to oopic-subscribe@yahoogroups.com )
Re: Stepper Motor Question - jon_mark_go - Apr 19 1:41:19 2008
Will the L298N work
(http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=497-1395-5-ND)
or should I go with a different version of the
chip(http://search.digikey.com/scripts/DkSearch/dksus.dll?Cat=2556632;keywords=l298)?
------------------------------------
(You need to be a member of oopic -- send a blank email to oopic-subscribe@yahoogroups.com )
(http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=497-1395-5-ND)
or should I go with a different version of the
chip(http://search.digikey.com/scripts/DkSearch/dksus.dll?Cat=2556632;keywords=l298)?
------------------------------------
(You need to be a member of oopic -- send a blank email to oopic-subscribe@yahoogroups.com )
Re: Re: Stepper Motor Question - ooPIC Tech Support - Apr 20 0:30:55 2008
I'd get the one that you think is the easiest to solder to a board. :)
DLC
jon_mark_go wrote:
> Will the L298N work
> (http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=497-1395-5-ND)
> or should I go with a different version of the
> chip(http://search.digikey.com/scripts/DkSearch/dksus.dll?Cat=2556632;keywords=l298)?
> ------------------------------------
(You need to be a member of oopic -- send a blank email to oopic-subscribe@yahoogroups.com )
DLC
jon_mark_go wrote:
> Will the L298N work
> (http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=497-1395-5-ND)
> or should I go with a different version of the
> chip(http://search.digikey.com/scripts/DkSearch/dksus.dll?Cat=2556632;keywords=l298)?
> ------------------------------------
(You need to be a member of oopic -- send a blank email to oopic-subscribe@yahoogroups.com )
Re: Stepper Motor Question - jon_mark_go - Apr 20 0:45:51 2008
Good point. The L298HN looks like the easiest
------------------------------------
(You need to be a member of oopic -- send a blank email to oopic-subscribe@yahoogroups.com )
------------------------------------
(You need to be a member of oopic -- send a blank email to oopic-subscribe@yahoogroups.com )