The ooPIC-R has 7 analog pins, but the three are tied up with the LEDs
and switches. Is there a simple way to gain access to pins 5,6 and 7
for analog input?

thanks
------------------------------------



(You need to be a member of oopic -- send a blank email to oopic-subscribe@yahoogroups.com )

--- In o...@yahoogroups.com, "design.wonk" wrote:
>
> The ooPIC-R has 7 analog pins, but the three are tied up with the LEDs
> and switches. Is there a simple way to gain access to pins 5,6 and 7
> for analog input?
>
> thanks
>

Unsolder the LEDs or the dropping resistors in front of the LEDs or
both. You might also consider unsoldering the resistors headed toward
the push buttons.

Richard

------------------------------------



(You need to be a member of oopic -- send a blank email to oopic-subscribe@yahoogroups.com )