A discussion group for the PICMicro microcontroller. Also called the Microchip PIC, this list is dedicated to the use and abuse of this fine, simple, microcontroller. Close to topic posts are welcome, ie. general electronics.
hello!
sorry for disturbing...
i am now doing a project using MC PIC 18F4220. it is actually a fiber
optics project, but i've been assigned to complete the receiver part
wh...
Hello all,
I\'ve spent several days now stuggling with the my PIC16F876 setup and the Wisp628 programmer. I managed to program the device once (code shown bellow) but after that...
Can somebody please help me, i need compare between plc and microcontroller and ineed eny one to help me in this report by any information or any sites from net
-------------...
stuff 4 sale updated....
thanks to all who replied, I've made a deal on the CFkit and box(s)
of IC's, the FPGA/image kits, the parallax kits, and the AT91
evalkit.
Here is...
I have a +48v and -48v power source that I want to creat a 96v peak to
peak AC square wave. I know how to switch the +48v with the PIC but is
ther an easy way to switch the -4...
Attempting to troubleshoot problem with usart, asynchronous mode, for
a school project. Two 16F877. Using the ICD-2 in circuit debugger.
We believe our transmit chip is workin...
Hi folks,
Can somebody please help me get a routine together that will allow me
to write a word sized variable to the memory of a 16f819 and be able
to read it back when the...
Hello,
I've recently purchased a box of goodies from an auction that
contained a few PIC development boards and some PIC chips. There are
two development boards that I just ...
Building a controller to output pulses to steppermotor driver. What is
the recommended pulse width output? Is there a standard ( one length
fix all) or is there other factors I...
Pic16F88
Checking pin voltages Portb pins read 5vdc and Porta pins read 2.5
vdc.
Why is this? On another circuit somewhat similar to this, I get 5vdc
readings on both Portb...