12f675 newbie | Piclist | EmbeddedRelated.com

A discussion group for the PICMicro microcontroller. Also called the Microchip PIC, this list is dedicated to the use and abuse of this fine, simple, microcontroller. Close to topic posts are welcome, ie. general electronics.

Hello, i just have bought my first 12f675 pic and nothing seems to work to me. I work with the 16f84a dailly but this little one is driving me mad. So i have a couple of questions. The internal osc is defaulted at 4 mhz? In the datasheet says that setting mclr on (during program time) will stop the internal osc, is this the only thing that stops intosc from running? its needed to call 3fffh and put this to osccal to make the internal oscilator run at 4mhz. (the value in 3fffh is the factory default) My first program just try to turn on a series of leds in the gpio port but it just dont seems to work. In the first time i dont have turned off the comparator nor the ad converters and turned on the chip with the leds connected directly, can this fry the chip? Im using ICProg to burn the chip, some ideas? Has someone a little code example so i can view if the chip is working? (something with just leds and internal osc must be perfect). Its a lot of questions but im loosed. After work perfectly with 16f84 i feel little stupid, but thats life!! Thanks to all you.

(You need to be a member of piclist -- send a blank email to piclist-subscribe@yahoogroups.com )

> Has someone a little code example so i can view if the chip is > working? (something with just leds and internal osc must be perfect). for all your blink-a-led programs :) http://www.voti.nl/blink Wouter van Ooijen -- ------------------------------------------- Van Ooijen Technische Informatica: www.voti.nl consultancy, development, PICmicro products

(You need to be a member of piclist -- send a blank email to piclist-subscribe@yahoogroups.com )

hi,

my name is shaun and i'm a newbie altogether, however i've started with the 12f675 and i have some programs that are working and structured correctly, email me direct and i'll email them back as attachments, i used the mplab ide, so i don't know if they will compile with your ide. theres nothing fancy just flashing leds, rotating leds, and a crude pwm output using analogue input to alter output

regards

shaun

Attachment (not stored)

Sixties Sunflowers .jpg
Type: image/jpeg

(You need to be a member of piclist -- send a blank email to piclist-subscribe@yahoogroups.com )

Sign in

Search piclist

Subscribe to piclist

piclist by Keywords

Ads

Discussion Groups

Discussion Groups | Piclist | 12f675 newbie

12f675 newbie - ocusce - Aug 14 7:55:00 2003

RE: 12f675 newbie - Wouter van Ooijen - Aug 14 20:09:00 2003

Re: 12f675 newbie - Author Unknown - Aug 15 3:19:00 2003