Sign in

username:

password:



Not a member?

Search piclist



Search tips

Subscribe to piclist



piclist by Keywords

12F675 | 16F628 | 16F84 | 16f877 | 16F877A | 16F88 | 18F458 | ADC | AVR | Bootloader | CAN | CCS | CRC | EAGLE | EEPROM | ICD | ICSP | IDE | JDM | LED | Macros | Microchip | MPLAB | PCB-CAD | PIC10F | Pic12f675 | PIC16F84 | PIC16F84A | PIC16F877 | PIC18 | PIC18F452 | PicBasic | PICC | PICSTART | PWM | RS-485 | RS232 | SMT | SPI | UART | USART | USB | Wireless | Wisp628 | Xilinx


Ads

Discussion Groups

See Also

DSPFPGAElectronics

Discussion Groups | Piclist | ICD 2 support for 16F628?

A discussion group for the PICMicro microcontroller. Also called the Microchip PIC, this list is dedicated to the use and abuse of this fine, simple, microcontroller. Close to topic posts are welcome, ie. general electronics.

ICD 2 support for 16F628? - Dennis Clark - Sep 27 16:52:00 2004

Hi all,

I've got an issue. My ICD-2 on MPLAB 6.60 says that the programmer
won't support the 16F628. The MC website says it will program it, but
not debug it without an adapter. OK, since my IDE refuses to let me
choose the ICD-2 as my programmer, it is obvious which way the wind
blows.
Can anyone else get this combination to work? Do I have to set
some flag or twiddle some bit for this to do as the web site says?

Thanks for any help,
DLC




(You need to be a member of piclist -- send a blank email to piclist-subscribe@yahoogroups.com )


Re: ICD 2 support for 16F628? - Phil - Sep 27 17:21:00 2004

you sure it supports the 628? I thought it supported the 628A but not
the non-A part.

--- In , "Dennis Clark" <dlc@f...> wrote:
> Hi all,
>
> I've got an issue. My ICD-2 on MPLAB 6.60 says that the programmer
> won't support the 16F628. The MC website says it will program it, but
> not debug it without an adapter. OK, since my IDE refuses to let me
> choose the ICD-2 as my programmer, it is obvious which way the wind
> blows.
> Can anyone else get this combination to work? Do I have to set
> some flag or twiddle some bit for this to do as the web site says?
>
> Thanks for any help,
> DLC



(You need to be a member of piclist -- send a blank email to piclist-subscribe@yahoogroups.com )

Re: ICD 2 support for 16F628? - Hasan Arslan - Sep 28 10:37:00 2004

 
Hi,
I have the same problem Whitch ICD2 and 16F628.
I use the ICD2 for debugger. And any PIC's have ICD suppurt. 16F628 have not ICD suport. But 16F628A have support. you can use it for debug.
 
For Programing Chip use a Programmer. I use Micropro PIC Programmer (Diyk149B kit).
I have make it by myself and it work perfect.
 
Hasan Arslan
MCU Designer

Dennis Clark <d...@frii.com> wrote:
Hi all,

  I've got an issue.  My ICD-2 on MPLAB 6.60 says that the programmer
won't support the 16F628.  The MC website says it will program it, but
not debug it without an adapter.  OK, since my IDE refuses to let me
choose the ICD-2 as my programmer, it is obvious which way the wind
blows. 
  Can anyone else get this combination to work?  Do I have to set
some flag or twiddle some bit for this to do as the web site says?

Thanks for any help,
DLC



to unsubscribe, go to http://www.yahoogroups.com and follow the instructions

Gesendet von Yahoo! Mail - Jetzt mit 100MB kostenlosem Speicher



(You need to be a member of piclist -- send a blank email to piclist-subscribe@yahoogroups.com )