Sign in

username:

password:



Not a member?

Search piclist



Search tips

Subscribe to piclist



piclist by Keywords

12F675 | 16F628 | 16F84 | 16f877 | 16F877A | 16F88 | 18F458 | ADC | AVR | Bootloader | CAN | CCS | CRC | EAGLE | EEPROM | ICD | ICSP | IDE | JDM | LED | Macros | Microchip | MPLAB | PCB-CAD | PIC10F | Pic12f675 | PIC16F84 | PIC16F84A | PIC16F877 | PIC18 | PIC18F452 | PicBasic | PICC | PICSTART | PWM | RS-485 | RS232 | SMT | SPI | UART | USART | USB | Wireless | Wisp628 | Xilinx

Discussion Groups

Discussion Groups | Piclist | RE: CAM on PIC18Cxx8

A discussion group for the PICMicro microcontroller. Also called the Microchip PIC, this list is dedicated to the use and abuse of this fine, simple, microcontroller. Close to topic posts are welcome, ie. general electronics.

RE: CAM on PIC18Cxx8 - david.clavey - Feb 13 1:00:00 2001


As far as I know the CAM module has not been implemented on the PIC18's.

You can however attach a Microchip CAM module to a PIC18.

See the page:

http://www.microchip.com/10/appnote/category/analog/can/index.htm

David

>Does anyone know if there exists any apps.note on how to use the CAN module
>on the PIC18Cxx8 ?





(You need to be a member of piclist -- send a blank email to piclist-subscribe@yahoogroups.com )

RE: CAM on PIC18Cxx8 - david.clavey - Feb 14 22:13:00 2001

Yes, I made a typo as well, as well as a mistake.
 
There are 18C chips coming out with CAN, some are in production, some are only in development.
 
For details of the CAN see the following page.
 
http://www.microchip.com/10/appnote/category/analog/can/index.htm
 
There are also lots of other references to CAN like:
 
18C reference manual:
 
http://www.microchip.com/10/lit/pline/picmicro/refernce/index.htm
 
and on the chips PIC18F's, but these are not available yet.
 
http://www.microchip.com/10/lit/pline/picmicro/families/18fxxx/index.htm
 
There is also some applications notes:
 
http://www.microchip.com/10/appnote/category/pic18/index.htm
 
I see that there are some devices with USB coming out. Excellent. And these devices still have a UART on board.
 
David
-----Original Message-----
From: Mounir Shita [mailto:m...@cognex.com]
Sent: Wednesday, February 14, 2001 9:15 AM
To: 'd...@ntlworld.com'
Subject: RE: [piclist] RE: CAM on PIC18Cxx8

Sorry, I think I made a typo, it is supposed to be the CAN (Controller Area Network) Module. That is implemented in the 18Cxx8 chips
-----Original Message-----
From: david.clavey [mailto:d...@ntlworld.com]
Sent: Monday, February 12, 2001 10:00 PM
To: p...@yahoogroups.com
Subject: [piclist] RE: CAM on PIC18Cxx8

As far as I know the CAM module has not been implemented on the PIC18's.

You can however attach a Microchip CAM module to a PIC18.

See the page:

http://www.microchip.com/10/appnote/category/analog/can/index.htm

David

>Does anyone know if there exists any apps.note on how to use the CAN module
>on the PIC18Cxx8 ?

to unsubscribe, go to http://www.onelist.com and follow the instructions




(You need to be a member of piclist -- send a blank email to piclist-subscribe@yahoogroups.com )