Mastering Modern FPGA Skills for Engineers
In the rapidly evolving tech industry, engineers must acquire proficiency in modern FPGA skills. These skills empower engineers to optimize designs, minimize resource usage, and efficiently address FPGA design challenges while ensuring functionality, security, and compliance.
Open-Source Licenses Made Easy with Buildroot and Yocto for Embedded Linux
In this article I will try to explain what are the copyrights/copyleft, what are the popular opensource software licenses, and how to make sure that your Embedded Linux system complies with them using popular build systems ; Buildroot or YOCTO projec
There are 10 kinds of people in the world
It is useful, in embedded software, to be able to specify values in binary. The C language lacks this facility. In this blog we look at how to fix that.
Getting Started With Zephyr: Devicetree Overlays
In this blog post, I show how the Devicetree overlay is a valuable construct in The Zephyr Project RTOS. Overlays allow embedded software engineers to override the default pin configuration specified in Zephyr for a particular board. In this blog post, I use I2C as an example. Specifically, I showed the default I2C pins used for the nRF52840 development kit in the nominal Zephyr Devicetree. Then, I demonstrated how an overlay can be used to override this pin configuration and the final result.
Embedded Developers, Ditch Your IDEs – Here’s Why!
Ditching your Integrated Development Environment (IDE) temporarily can be a transformative learning experience in embedded development. This post invites you to explore the underpinnings of IDEs by delving into alternative tools and processes like Makefile, CMake, Vim, GDB, and OpenOCD. Understanding these tools can demystify the background operations of IDEs, revealing the intricacies of compiling, linking, and debugging. This journey into the “under the hood” aspects of development is not just about learning new tools, but also about gaining a deeper appreciation for the convenience and efficiency that IDEs provide. By stepping out of your comfort zone and experimenting with these alternatives, you can sharpen your skills, enhance your knowledge, and possibly discover a more tailored and streamlined development experience. Whether you're a novice or a seasoned developer, this exploration promises insights and revelations that can elevate your embedded development journey.
C to C++: Using Abstract Interfaces to Create Hardware Abstraction Layers (HAL)
In C to C++, we've been exploring how to transition from a C developer to a C++ developer when working in embedded system. In this post, we will explore how to leverage classes to create hardware abstraction layers (HAL). You'll learn about the various inheritance mechanisms, what an virtual function is, and how to create an abstract class.
The Backstreet Consultant
In the uncharted land between Arduino-wielding kids and qualified electronics engineers emerged an entirely new market for embedded work. In this article, based on my personal experience and observations, I will attempt to outline this young market, the forces operating within it, and the kinds of people involved.
A short historyUp until fifteen years ago, give or take, embedded design was done exclusively by trained professionals: not just because of the required technical know-how, but also...
Are We Shooting Ourselves in the Foot with Stack Overflow?
Most traditional, beaten-path memory layouts allocate the stack space above the data sections in RAM, even though the stack grows “down” (towards the lower memory addresses) in most embedded processors. This arrangement puts your program data in the path of destruction of a stack overflow. In other words, you violate the first Gun Safety Rule (ALWAYS keep the gun pointed in a safe direction!) and you end up shooting yourself in the foot. This article shows how to locate the stack at the BEGINNING of RAM and thus point it in the "safe" direction.
nRF5 to nRF Connect SDK migration via DFU over BLE
This writeup contains some notes on how I was able to migrate one of my clients projects based on the nRF5 SDK, to nRF Connect SDK (NCS) based firmware, via a DFU to devices in the field over BLE.
FPGA skills for the modern world
With the ever increasing number of applications involving video processing, AI or edge computing the appetite for suitably skilled FPGA Engineers has never been higher from the market which is expected to grow to $15 billion USD by 2027!
In terms of industries opportunities can be typically found within:
- Automotive
- Aerospace
- Defense
- Data Processing
However this list is certainly not exhaustive as any application requiring algorithms which can leverage from highly parallel and...
Modeling Gate Drive Diodes
This is a short article about how to analyze the diode in some gate drive circuits when figuring out turn-off characteristics --- specifically, determining the relationship between gate drive current and gate voltage during turn-off of a power transistor.
Ten Little Algorithms, Part 2: The Single-Pole Low-Pass Filter
Other articles in this series:
- Part 1: Russian Peasant Multiplication
- Part 3: Welford's Method (And Friends)
- Part 4: Topological Sort
- Part 5: Quadratic Extremum Interpolation and Chandrupatla's Method
- Part 6: Green’s Theorem and Swept-Area Detection
I’m writing this article in a room with a bunch of other people talking, and while sometimes I wish they would just SHUT UP, it would be...
Linear Feedback Shift Registers for the Uninitiated, Part I: Ex-Pralite Monks and Finite Fields
Later there will be, I hope, some people who will find it to their advantage to decipher all this mess.
— Évariste Galois, May 29, 1832
I was going to call this short series of articles “LFSRs for Dummies”, but thought better of it. What is a linear feedback shift register? If you want the short answer, the Wikipedia article is a decent introduction. But these articles are aimed at those of you who want a little bit deeper mathematical understanding, with some practical...
Libgpiod - Toggling GPIOs The Right Way In Embedded Linux
OverviewWe all know that GPIO is one of the core elements of any embedded system. We use GPIOs to control LEDs and use them to monitor switches and button presses. In modern embedded systems, GPIOs can also be used as pins for other peripheral busses, such as SPI and I2C. Similar to the previous article on interacting with peripherals on an SPI bus in userspace via SPIdev (https://www.embeddedrelated.com/showarticle/1485.php), we can also control GPIOs from userspace on an embedded...
Help, My Serial Data Has Been Framed: How To Handle Packets When All You Have Are Streams
Today we're going to talk about data framing and something called COBS, which will make your life easier the next time you use serial communications on an embedded system -- but first, here's a quiz:
Quick Diversion, Part I: Which of the following is the toughest area of electrical engineering? analog circuit design digital circuit design power electronics communications radiofrequency (RF) circuit design electromagnetic...How to Build a Fixed-Point PI Controller That Just Works: Part I
This two-part article explains five tips to make a fixed-point PI controller work well. I am not going to talk about loop tuning -- there are hundreds of articles and books about that; any control-systems course will go over loop tuning enough to help you understand the fundamentals. There will always be some differences for each system you have to control, but the goals are the same: drive the average error to zero, keep the system stable, and maximize performance (keep overshoot and delay...
Getting Started With Zephyr: Devicetree Overlays
In this blog post, I show how the Devicetree overlay is a valuable construct in The Zephyr Project RTOS. Overlays allow embedded software engineers to override the default pin configuration specified in Zephyr for a particular board. In this blog post, I use I2C as an example. Specifically, I showed the default I2C pins used for the nRF52840 development kit in the nominal Zephyr Devicetree. Then, I demonstrated how an overlay can be used to override this pin configuration and the final result.
Modern C++ in embedded development: Static Classes
There is a concept of static class in C#. It is a class that contains only static members and methods, and it can’t be instantiated. In C#, a static class is declared using the static keyword.
Static classes are used to group functions that belong to the same logical unit or software module and that may have a shared state (member variables).
Static class in C++The concept of a static class can be implemented in C++ as a class with all static methods and members and by deleting...
Analog-to-Digital Confusion: Pitfalls of Driving an ADC
Imagine the following scenario:You're a successful engineer (sounds nice, doesn't it!) working on a project with three or four circuit boards. More than even you can handle, so you give one of them over to your coworker Wayne to design. Wayne graduated two years ago from college. He's smart, he's a quick learner, and he's really fast at designing schematics and laying out circuit boards. It's just that sometimes he takes some shortcuts... but in this case the circuit board is just something...
Introduction to Microcontrollers - Driving WS2812 RGB LEDs
This tutorial chapter is a bit of a detour, but I think an interesting and useful one. It introduces a bit of assembly language programming, and demonstrates bit-banging a tight serial data protocol. And it deals with RGB LEDs, which are just very fun in their own right, especially these new parts. So I thought I'd post this to give readers time for some holiday lighting experimenting.
Back To The FutureRemember how we started this...
Absolute Beginner's Guide To Getting Started With Raspberry Pi
Contents:- Introduction
- Simplifications
- Decisions
- The Raspberry Pi
- Parts: What You Need
- Suppliers: Where To Order
- Shopping Lists: What To Order
Already 3000+ Attendees Registered for the Upcoming Embedded Online Conference
Chances are you already know, through the newsletter or banners on the Related sites, about the upcoming Embedded Online Conference.
Chances are you also already know that you have until the end of the month of February to register for free.
And chances are that you are one of the more than 3000 pro-active engineers who have already registered.
But If you are like me and have a tendency to do tomorrow what can be done today, maybe you haven't registered yet. You may...
How to Estimate Encoder Velocity Without Making Stupid Mistakes: Part II (Tracking Loops and PLLs)
Yeeehah! Finally we're ready to tackle some more clever ways to figure out the velocity of a position encoder. In part I, we looked at the basics of velocity estimation. Then in my last article, I talked a little about what's necessary to evaluate different kinds of algorithms. Now it's time to start describing them. We'll cover tracking loops and phase-locked loops in this article, and Luenberger observers in part III.
But first we need a moderately simple, but interesting, example...
Learning Rust For Embedded Systems
The Motivational PortionBased on recommendations from Kevin Nause, the VolksEEG project is considering using Rust as the embedded system programming language. So I've been off on a tear skimming books and e-books and watching videos at 2x to evaluate it.
My conclusion? Do it!
Most of the rest of us participants are primarily C/C++ embedded developers. I had previously been sensitized to Rust for embedded systems by
Implementing State Machines
State machines are a great way to design software but they can be difficult to implement well.To illustrate this I’ll develop a simple state machine then increase the complexity to demonstrate some of the difficulties
We’ve all washed dishes before - it’s easy isn’t it? Scrub, rinse, dry, scrub, rinse dry. Scrub the dish until all of the gunk is off of it, rinse until the soap is off, put it in the drying rack. If you want to design software to implement this you have options. You...
Lost Secrets of the H-Bridge, Part IV: DC Link Decoupling and Why Electrolytic Capacitors Are Not Enough
Those of you who read my earlier articles about H-bridges, and followed them closely, have noticed there's some unfinished business. Well, here it is. Just so you know, I've been nervous about writing the fourth (and hopefully final) part of this series for a while. Fourth installments after a hiatus can bring bad vibes. I mean, look what it did to George Lucas: now we have Star Wars Episode I: The Phantom Menace and
Digital PLL's -- Part 1
1. IntroductionFigure 1.1 is a block diagram of a digital PLL (DPLL). The purpose of the DPLL is to lock the phase of a numerically controlled oscillator (NCO) to a reference signal. The loop includes a phase detector to compute phase error and a loop filter to set loop dynamic performance. The output of the loop filter controls the frequency and phase of the NCO, driving the phase error to zero.
One application of the DPLL is to recover the timing in a digital...
Introduction to Microcontrollers - More On GPIO
Now that we have our LED Blinky program nailed down, it's time to look more closely at outputs, add button/switch inputs, and work with reading inputs and driving outputs based on those inputs.
It's ON - No, It's OFF - No, It's ON...I have to confess, I cheated. Well, let's say I glossed over something very important. In our LED Blinky program, we never cared about whether an output '1' or an output '0' turned on the LED. Since we were just...
Unit Tests for Embedded Code
I originate from an electrical engineering background and my first industry experience was in a large, staid defense contractor. Both of these experiences contributed to a significant lack of knowledge with regards to software development best practices. Electrical engineers often have a backwards view of software in general; large defense contractors have similar views of software and couple it with a general disdain for any sort of automation or ‘immature’ practices. While there...
How to Build a Fixed-Point PI Controller That Just Works: Part II
In Part I we talked about some of the issues around discrete-time proportional-integral (PI) controllers:
- various forms and whether to use the canonical form for z-transforms (don't do it!)
- order of operation in the integral term: whether to scale and then integrate (my recommendation), or integrate and then scale.
- saturation and anti-windup
In this part we'll talk about the issues surrounding fixed-point implementations of PI controllers. First let's recap the conceptual structure...
October winner announced
If you are a regular visitor of EmbeddedRelated, you are most likely aware that I have been running monthly draws lately for users of the site who are helping me to clean up the archives by rating threads in the forums section.
For the month of August, the member "Cryptoman" won a iPad, and for the month of September, 10 members won $50 each.
For October, the winner of the new iPod Touch is the member with the username "hssathya".
The winner of the next draw will win...
Behold, the New Comments System!
I have just finished implementing a new system for commenting the blogs. It uses Ajax extensively, so the page won't reload if you post a comment. And it is a 'threaded' system, which means that if you post a reply to a comment, it will be attached to it.
What do you think? I personally love it. Please go ahead and test it with a quick comment.
Although it is better to be logged in to post a comment, non-registered users can also comment, but they will have...
Best Embedded Systems pdf Documents Out There
There are thousands of pdf documents related to Embedded Systems available online. In fact, when I do a search in Google for:
embedded systems filetype:pdf
I get 4,340,000 results! A huge mix of articles, promotional documents, theses, etc.
Out of these 4 millions+ documents, I suspect that there must be at least a few hundreds jewels that deserve to be given more visibility.
Today, I am asking for your help (again!) to build a directory of some of the most useful pdf files out...
New Discussion Group for Users of TI ARM based MCUs
If you are a user of an ARM based TI Microcontroller, please feel free to join the new "TI ARM processors MCUs" discussion group by sending a blank email to: tiarm-subscribe@yahoogroups.com This discussion group will be moderated, so you don't have to worry about receiving more spam than you probably already get. It usually takes a few weeks for a group to gain momentum, so don't worry if the activity level is low for a little while, but make sure to join so you don't miss the good...
New TI MCU Resource Center
I am happy to announce the publication of the new "TI MCU Resource Center" on EmbeddedRelated.com, where TI will regularly add videos and articles to keep you informed on their latest and greatest MCU related products.
To access the new section, you'll find a link in the main menu of the site at the top of the page.
Blogs Section Now Online!
I am happy to announce that the blog section is now online.
Last week, I sent an email to all the members of EmbeddedRelated.com to ask for embedded systems experts who would be interested in blogging on the site. The response was very positive and I have selected 10 highly qualified individuals who will soon be writing here about all sorts of embedded systems related subjects. I am currently in the process of receiving their info (bio, photo, username, etc) and creating their bloggers'...