--- In 6..., "Dr. David A. Perreault" wrote

> Send me information on where, when, and by whom it was purchased and
> I'll see that P&E sends out an upgrade.

Hi, Dr. David!

Sorry, you don't understood me. Miladin Lakov in USA bought for me
(approx. in august 2003) USB MON08 adapter but P&E mistakenly
put in MON08 package USB-ML12 adapter. P&E admit own mistake
and sent me PROG12Z as a gift.
I found in my e-mail archives one of the sw poster for me:
http://www.pemicro.com/PESoftwarePoster/28_3_5901301454508680

Serge.

Serge

Send me information on where, when, and by whom it was purchased and
I'll see that P&E sends out an upgrade.

Dave

--- In 6..., Dave Perreault wrote:
> To All
> If Serge had a license for this software, he should go back to P&E for
> an upgrade and should not be asking people to provide him with a
pirated copy.

Dear Dave!

I'm not a pirate but only victim of P&E fault. There was long story...
In 2003 year I bought USB MON08 Multilink adapter (via my friend)
but P&E faulty put in package from MON08 another USB-ML12 adapter
which costs the same money but in that time it not be able for
ordering on P&E site so I can't order it...I ask again my friend
to buy another MON08 adapter for me... I try to make a request P&E
send me PROG12Z software that I buy because sales dept. fault. Soon
after customer support sent me software poster with link to it and
after aprrox. 10 month sent me another release... Recently I change
(happy occassion) my old USB-ML12 (REV.A) with a new one (REV.B PCB
layout) but PROG12Z v1.64 don't see it... So I want to upgrade
PROG12Z software but I don't want to desturb P&E customer support
with my old claim. I think you understand me...

Sorry for my bad english. By the way I live in Ukraine and this is
about 12.000 km from USA...

Regards.
Serge.

> Which is why I phrased my response as I did. It was not clear if he
> was asking for the new version, or had it and couldn't get it to
> work. ["...changed my adapter for new one, but with other hardware"
> wasn't at all clear to me.] Note that I did NOT offer to send him
> bootlegged software that he should be able to legally get from P&E.

Thanks

We appreciate your honesty.

Dave

At 11:00 5/7/2006 -0400, you wrote:
>To All
>
>If Serge had a license for this software, he should go back to P&E for
>an upgrade and should not be asking people to provide him with a pirated
>copy.
>

Which is why I phrased my response as I did. It was not clear if he
was asking for the new version, or had it and couldn't get it to
work. ["...changed my adapter for new one, but with other hardware"
wasn't at all clear to me.] Note that I did NOT offer to send him
bootlegged software that he should be able to legally get from P&E. <G>

jmk
-----------
James M. Knox
TriSoft ph 512-385-0316
1300 Koenig Lane West fax 512-371-5716
Suite 200
Austin, Tx 78756 j...@trisoft.com
-----------

To All

If Serge had a license for this software, he should go back to P&E for
an upgrade and should not be asking people to provide him with a pirated
copy.

Dave

--- In 6..., "James M. Knox" wrote:

> I'm using 1.66. Couldn't you get it to work on your system? I'm
> running with the old parallel port BDM pod, but it works okay for me.

Hi, James!
I change my USB-ML12 adapter for new one but with other hardware, so
1.64 don't work with it...:-( Maybe newest version will help me.
Can you send it to me?

Regards.
Serge

I'm using 1.66. Couldn't you get it to work on your system? I'm
running with the old parallel port BDM pod, but it works okay for me.

jmk
-----------
James M. Knox
TriSoft ph 512-385-0316
1300 Koenig Lane West fax 512-371-5716
Suite 200
Austin, Tx 78756 j...@trisoft.com
-----------

Hi, All!

Anybody have Pemicro PROG12z installer (working link or file)
with version higher than 1.64?

Regards.
Serge.