Reply by Alberto Cuenca●October 17, 20062006-10-17
Thank you very much!!! I will start to read all the application notes!!
Reply by Jefferson Smith●October 17, 20062006-10-17
--- In 6..., "alcuemar" wrote: > Anyone knows how if there is any application note
for reprogramming
> the HC12S mcu using the CANBUS serial communitations!!
Reply by Steve Letkeman●October 17, 20062006-10-17
Do a search for
AN1828 "flash programming via CAN"
AN1718 "A serial bootloader..."
AN1836 "Flash programming..."
AN2166 "Programming and erasing flash..."
AN2153 "A serial bootloader..."
If you are interested in a complete kit of hardware and software for CAN
downloading with
PC software and all the source code, please check out this page http://www.zanthic.com/cheetah12.htm
Steve
Steven D. Letkeman BSc.
President - Zanthic Technologies Inc.
403-526-8318
www.zanthic.com Embedded micro-controllers and CAN interfaces
www.brightan.com Automated lighting systems
Reply by alcuemar●October 17, 20062006-10-17
Hello everybody,
Anyone knows how if there is any application note for reprogramming
the HC12S mcu using the CANBUS serial communitations!!