Reply by laloui derafa●November 21, 20072007-11-21
Merci MR MARC
je viens de generer le signal PWM et sa marche
Trés cordialement
Laloui DERAFA
----- Message d'origine ----
De : MARC Erwan
À : 6...
Envoyé le : Mercredi, 21 Novembre 2007, 16h23mn 19s
Objet : RE: [68HC12] PWM GENERATE
Instead of the "bad" answer below, find a link to a document that
may help you: http://www.freescal e.com/files/ microcontrollers /doc/ref_
manual/S12PWM8B8 CV1.pdf?fsrch= 1
Regards
Erwan MARC
____________ _________ _________ __
De : 68HC12@yahoogroups. com [mailto:68HC12@yahoogroups. com] De la part de MARC
Erwan
Envoyé : mercredi 21 novembre 2007 15:15
À : 68HC12@yahoogroups. com
Objet : RE: [68HC12] PWM GENERATE
guideline:
1) configure PWM module registers
2) set PWM rate
3) check signal on output pin
Did you read datasheet of PWM module integrated in your chip?
Regards
____________ _________ _________ __
De : 68HC12@yahoogroups. com
é
À
'
Reply by laloui derafa●November 21, 20072007-11-21
Merci MR MARC
je viens de generer le signal PWM et sa marche
Trés cordialement
Laloui DERAFA
----- Message d'origine ----
De : MARC Erwan
À : 6...
Envoyé le : Mercredi, 21 Novembre 2007, 16h23mn 19s
Objet : RE: [68HC12] PWM GENERATE
Instead of the "bad" answer below, find a link to a document that
may help you: http://www.freescal e.com/files/ microcontrollers /doc/ref_
manual/S12PWM8B8 CV1.pdf?fsrch= 1
Regards
Erwan MARC
____________ _________ _________ __
De : 68HC12@yahoogroups. com [mailto:68HC12@yahoogroups. com] De la part de MARC
Erwan
Envoyé : mercredi 21 novembre 2007 15:15
À : 68HC12@yahoogroups. com
Objet : RE: [68HC12] PWM GENERATE
guideline:
1) configure PWM module registers
2) set PWM rate
3) check signal on output pin
Did you read datasheet of PWM module integrated in your chip?
Regards
____________ _________ _________ __
De : 68HC12@yahoogroups. com
é
À
'
Reply by "Alex A."●November 21, 20072007-11-21
Thank you everybody for all your help. You "guys" are great. Thanks a lot
De : 6... [mailto:6...] De la part de MARC Erwan
Envoy: mercredi 21 novembre 2007 15:15
: 6...
Objet : RE: [68HC12] PWM GENERATE
guideline:
1) configure PWM module registers
2) set PWM rate
3) check signal on output pin
Did you read datasheet of PWM module integrated in your chip?
Regards
________________________________
De : 6... [mailto:6... ] De la part de laloui derafa
Envoy: mercredi 21 novembre 2007 14:55
: 6...
Objet : [68HC12] PWM GENERATE
Dear All
Can you help to generate pwm signals using MC9S12DP512
Thankyou
.
DISCLAIMER:
This electronic transmission (and any attachments thereto) is intended solely
for the use of the addressee(s). It may contain confidential or legally
privileged information. If you are not the intended recipient of this message,
you must delete it immediately and notify the sender. Any unauthorized use or
disclosure of this message is strictly prohibited. Faurecia does not guarantee
the integrity of this transmission and shall therefore never be liable if the
message is altered or falsified nor for any virus, interception or damage to
your system.
De : 6... [mailto:6...] De la part de MARC Erwan
Envoy: mercredi 21 novembre 2007 15:15
: 6...
Objet : RE: [68HC12] PWM GENERATE
guideline:
1) configure PWM module registers
2) set PWM rate
3) check signal on output pin
Did you read datasheet of PWM module integrated in your chip?
Regards
________________________________
De : 6...
Reply by MARC Erwan●November 21, 20072007-11-21
guideline:
1) configure PWM module registers
2) set PWM rate
3) check signal on output pin
Did you read datasheet of PWM module integrated in your chip?
Regards
________________________________
De : 6... [mailto:6...] De la part de laloui derafa
Envoy: mercredi 21 novembre 2007 14:55
: 6...
Objet : [68HC12] PWM GENERATE
Dear All
Can you help to generate pwm signals using MC9S12DP512
Thankyou
.
DISCLAIMER:
This electronic transmission (and any attachments thereto) is intended solely
for the use of the addressee(s). It may contain confidential or legally
privileged information. If you are not the intended recipient of this message,
you must delete it immediately and notify the sender. Any unauthorized use or
disclosure of this message is strictly prohibited. Faurecia does not guarantee
the integrity of this transmission and shall therefore never be liable if the
message is altered or falsified nor for any virus, interception or damage to
your system.
Reply by laloui derafa●November 21, 20072007-11-21
Dear All
Can you help to generate pwm signals using MC9S12DP512
Thankyou
_____________________________________________________________________________
Ne gardez plus qu'une seule adresse mail ! Copiez vos mails vers Yahoo!
Mail