#if _FLASH_SIZE_ == 0x40
#define USE_2NDFLASH_CODE // Uncomment this only if you have a
// a board with 2 256K flashes, and you
// want to use the second flash for extra
// code space. The file system is not
// compatible with using the second flash
// for code.
#endif
Bingo! That was it. Since my code needs to be compiled on both an RCM3000 and
the RCM3209, I need to have USE_2NDFLASH_CODE defined
for the RCM3000. Is there another cpu-type define I can use to
condition whether I should define USE_2NDFLASH_CODE or not?
Steve
Reply by Scott Henion●January 5, 20112011-01-05
Sounds like you have enabled USE_2NDFLASH_CODE in the bios for the
RCM3000. Comment out the define in the bios and it should work.