--- In r..., "cce32" wrote: >
> Hi,
>
> According to the 6000 datasheet it has multiple Analog to Digital converters
but there is no mention of ADC on the RMC6700 interface board.
>
> Does this mean they just didn't run those pins out for this board?
>
> Any chance any of them are available for tapping into directly on the mini-pci
card :-?
> Thanks,
> /Carl
>
If you look on page 8 of the module schematic, it shows all the analog pins are
grounded on the module.
Reply by petermcs●November 3, 20112011-11-03
As far as I can see they are not brought out to any point from the package and
as it is a BGA there is no chance of finding a way to hook up to them.
Regards,
Peter
--- In r..., "cce32" wrote: >
> Hi,
>
> According to the 6000 datasheet it has multiple Analog to Digital converters
but there is no mention of ADC on the RMC6700 interface board.
>
> Does this mean they just didn't run those pins out for this board?
>
> Any chance any of them are available for tapping into directly on the mini-pci
card :-?
> Thanks,
> /Carl
>
Reply by cce32●November 3, 20112011-11-03
Hi,
According to the 6000 datasheet it has multiple Analog to Digital converters but
there is no mention of ADC on the RMC6700 interface board.
Does this mean they just didn't run those pins out for this board?
Any chance any of them are available for tapping into directly on the mini-pci
card :-?
Thanks,
/Carl