> I found the problem with the compiler ... I just
needed to change a
> declaration.
>
> I've now got the fonts working (the 3x6 font anyway ... I haven't
tried
> the others, yet). The only disadvantage I can see to the way you've
> defined your font data is that you can't naturally have fonts more
than
> 8 pixels high because you are using 8 bit values for each
'column'.
If you look at 18 dot font in T6963 code, the font width is 3 byte (24
pixel) and height is 18 bytes (or pixel). We are using these fonts in our
products with LPC2136.
It is worth while to mention that credit for these fonts goes to Michael J.
Karas, I only implemented it on K107/108 and T6963.
Warm Regards,
Mukund Deshmukh,
Beta Computronics Pvt Ltd.
10/1 IT Park, Parsodi,
Nagpur -440022 India.
Web site - http://betacomp.com
Meet us at our Stall No M91 Hall No 18 MZ ,
PLASTINDIA 2009 , Feb 4 -9, 2009,
Pragati Maidan, New Delhi, INDIA
Setting Pixels for ST7920 based 128x64 LCD
Started by ●November 24, 2008