keil mdk-arm basic and ulink2?

Started by fhriley September 27, 2011
For those of you using these for your development, where did you get them and what did they cost? I submitted a request for quote to keil over a week ago and got no response.

In Brazil and South America we get through the distributor:
www.anacom.com.br

Alexandre Rodrigues

________________________________
De: fhriley
Para: l...
Enviadas: Terça-feira, 27 de Setembro de 2011 17:12
Assunto: [lpc2000] keil mdk-arm basic and ulink2?
 
For those of you using these for your development, where did you get them and what did they cost? I submitted a request for quote to keil over a week ago and got no response.




There are a couple of places to get pricing.

If you are in the USA you may well be lucky enough to purchase from LPC Tools:

Single user license: $4,895.
256KB code-limited license: $2,895.

Of course, Mouser also provides prices:

MDK-PRO-T: 1 year license: $4,750
MDK-PRO: $11,884 (yes, that number is correct).

MDK-T: 1 year basic license: $2328
MDK_ARM: $5,280

MDK-ARM-B: this is probably the "Basic" or code limited version: $3,204

U-LINK 2: $469

Quite what ARM/Keil offer in the MDK line i(as they have changed it somewhat) s quite beyond me right now. I don't know what you can purchase.

Regards,

-- Paul.
On 27 Sep 2011, at 21:12, fhriley wrote:

> For those of you using these for your development, where did you get them and what did they cost? I submitted a request for quote to keil over a week ago and got no response.
>
>
--- In l..., "fhriley" wrote:
>
> For those of you using these for your development, where did you get them and what did they cost? I submitted a request for quote to keil over a week ago and got no response.
>
In the US, you can also go to Digikey. They offer the same prices for the software, but you can get the U-Link2 for $266. The Ulink-Pro will run you $1395.

--- In l..., "fhriley" wrote:
>
> For those of you using these for your development, where did you get them and what did they cost? I submitted a request for quote to keil over a week ago and got no response.
>
In the US, you can also go to Digikey. They offer the same prices for the software, but you can get the U-Link2 for $266. The Ulink-Pro will run you $1395.

There are a couple of places to get pricing.

If you are in the USA you may well be lucky enough to purchase from LPC Tools:

Single user license: $4,895.
256KB code-limited license: $2,895.

Of course, Mouser also provides prices:

MDK-PRO-T: 1 year license: $4,750
MDK-PRO: $11,884 (yes, that number is correct).

MDK-T: 1 year basic license: $2328
MDK_ARM: $5,280

MDK-ARM-B: this is probably the "Basic" or code limited version: $3,204

U-LINK 2: $469

Quite what ARM/Keil offer in the MDK line i(as they have changed it somewhat) s quite beyond me right now. I don't know what you can purchase.

Regards,

-- Paul.
On 27 Sep 2011, at 21:12, fhriley wrote:

> For those of you using these for your development, where did you get them and what did they cost? I submitted a request for quote to keil over a week ago and got no response.
>
>
In Brazil and South America we get through the distributor:
www.anacom.com.br

Alexandre Rodrigues

________________________________
De: fhriley
Para: l...
Enviadas: Terça-feira, 27 de Setembro de 2011 17:12
Assunto: [lpc2000] keil mdk-arm basic and ulink2?
 
For those of you using these for your development, where did you get them and what did they cost? I submitted a request for quote to keil over a week ago and got no response.




For those of you using these for your development, where did you get them and what did they cost? I submitted a request for quote to keil over a week ago and got no response.