MSP FET 430 UIF installation

Started by Thiagraj Peri Natraj August 30, 2005
Hi List,
   IAR embedded version 4.0, Windows 2000.
   Following the instructions in MSP FET USers guide,
in Appendix F, for the FET 430 UIF. The hardware
Wizard
asks for the driver information files located in the 
hard disk. 

Under Embedded Workbench 4.0\430\TIUSBFET\
i could find only the folder WinXP and not for Windows
2000.Is this the right path for the device drivers?

When I use the WinXP path, i was able to compile and
build my application but while debugging got a message
"driver doesnot support code coverage"

Any inputs?
TIA,
With Regs,
Peri



		
__________________________________ 
 




--- In msp430@msp4..., Thiagraj Peri Natraj
<embeddedperi1@y...> wrote:
> 
> Hi List,
>    IAR embedded version 4.0, Windows 2000.
>    Following the instructions in MSP FET USers guide,
> in Appendix F, for the FET 430 UIF. The hardware
> Wizard
> asks for the driver information files located in the 
> hard disk. 
> 
> Under Embedded Workbench 4.0\430\TIUSBFET\
> i could find only the folder WinXP and not for Windows
> 2000.Is this the right path for the device drivers?
> 
> When I use the WinXP path, i was able to compile and
> build my application but while debugging got a message
> "driver doesnot support code coverage"

The Kickstart version of IAR does not support code coverage so this is
not an error..

Steve,
> 
> Any inputs?
> TIA,
> With Regs,
> Peri
> 
> 
> 
> 		
> __________________________________ 
> 




So, Is the WindowsXP driver compatabile for the
Windows 2000 OS.
Regs,
Peri
--- Steve Coetzee <stevec@stev...> wrote:

> --- In msp430@msp4..., Thiagraj Peri Natraj
> <embeddedperi1@y...> wrote:
> > 
> > Hi List,
> >    IAR embedded version 4.0, Windows 2000.
> >    Following the instructions in MSP FET USers
> guide,
> > in Appendix F, for the FET 430 UIF. The hardware
> > Wizard
> > asks for the driver information files located in
> the 
> > hard disk. 
> > 
> > Under Embedded Workbench 4.0\430\TIUSBFET\
> > i could find only the folder WinXP and not for
> Windows
> > 2000.Is this the right path for the device
> drivers?
> > 
> > When I use the WinXP path, i was able to compile
> and
> > build my application but while debugging got a
> message
> > "driver doesnot support code coverage"
> 
> The Kickstart version of IAR does not support code
> coverage so this is
> not an error..
> 
> Steve,
> > 
> > Any inputs?
> > TIA,
> > With Regs,
> > Peri
> > 
> > 
> > 
> > 		
> > __________________________________ 
> > 
> 
> 
> 


__________________________________________________
 


So, Is the WindowsXP driver compatabile for the
Windows 2000 OS.
Regs,
Peri
--- Steve Coetzee <stevec@stev...> wrote:

> --- In msp430@msp4..., Thiagraj Peri Natraj
> <embeddedperi1@y...> wrote:
> > 
> > Hi List,
> >    IAR embedded version 4.0, Windows 2000.
> >    Following the instructions in MSP FET USers
> guide,
> > in Appendix F, for the FET 430 UIF. The hardware
> > Wizard
> > asks for the driver information files located in
> the 
> > hard disk. 
> > 
> > Under Embedded Workbench 4.0\430\TIUSBFET\
> > i could find only the folder WinXP and not for
> Windows
> > 2000.Is this the right path for the device
> drivers?
> > 
> > When I use the WinXP path, i was able to compile
> and
> > build my application but while debugging got a
> message
> > "driver doesnot support code coverage"
> 
> The Kickstart version of IAR does not support code
> coverage so this is
> not an error..
> 
> Steve,
> > 
> > Any inputs?
> > TIA,
> > With Regs,
> > Peri
> > 
> > 
> > 
> > 		
> > __________________________________ 
> > 
> 
> 
> 


__________________________________________________
 

--- In msp430@msp4..., Thiagraj Peri Natraj
<embeddedperi1@y...> wrote:
> 
> Hi List,
>    IAR embedded version 4.0, Windows 2000.
>    Following the instructions in MSP FET USers guide,
> in Appendix F, for the FET 430 UIF. The hardware
> Wizard
> asks for the driver information files located in the 
> hard disk. 
> 
> Under Embedded Workbench 4.0\430\TIUSBFET\
> i could find only the folder WinXP and not for Windows
> 2000.Is this the right path for the device drivers?
> 
> When I use the WinXP path, i was able to compile and
> build my application but while debugging got a message
> "driver doesnot support code coverage"

The Kickstart version of IAR does not support code coverage so this is
not an error..

Steve,
> 
> Any inputs?
> TIA,
> With Regs,
> Peri
> 
> 
> 
> 		
> __________________________________ 
> 



Hi List,
   IAR embedded version 4.0, Windows 2000.
   Following the instructions in MSP FET USers guide,
in Appendix F, for the FET 430 UIF. The hardware
Wizard
asks for the driver information files located in the 
hard disk. 

Under Embedded Workbench 4.0\430\TIUSBFET\
i could find only the folder WinXP and not for Windows
2000.Is this the right path for the device drivers?

When I use the WinXP path, i was able to compile and
build my application but while debugging got a message
"driver doesnot support code coverage"

Any inputs?
TIA,
With Regs,
Peri



		
__________________________________