Infineon
Comp.Arch.Embedded is a worldwide Usenet news group that is used to discuss various aspects of Embedded Systems development.
We found 167 threads matching "infineon"
You are looking at page 1 of 5.
The most relevant threads are listed first
Jedi - 2005-04-08 10:41:00
Any other also got no feedback on technical question
for Infineon products?
rick
...
Hi everyone
I am trying to identify what type and revision of the Infineon C16x
processor family my software is running on. I am reading the IDCHIP
register which according to the infineon docs returns an 8 bit
CHIPID and another 8 bit revision number.
I have searched the infineo website an...
Adib Taraben - 2006-11-10 17:04:00
Hello,
I am using Infineon C167 or its new derivate XC167.
Can someone recommend a TCP-Stack and OS combination for that?
Thx, Adib.
...
David Brooks - 2009-03-18 03:19:00
A GCC build for the Infineon TriCore (TC17xx parts) has been posted at:
http://www.dannelson.net/
There's an installer for Windows, & source for Linux
...
TahoeKid - 2006-01-05 17:55:00
I have the board and cpu but not able to find datasheet. Infineon won't
send a copy.
...
u_stadler@yahoo.de - 2006-03-07 10:01:00
well i did search on google.
but i'm looking for the sensors only. not complete systems.
i found the fujitsu and i know infineon got one. just cant find any
info on the infineon sensor or distributor.
perhaps some of you are already using some fingerprint sensors and
could share their experienc...
Jim Granville - 2008-06-13 21:10:00
Joerg wrote:
>
> I wish the MSP430 was available in automotive but it ain't. At least not
> according to the TI rep.
For more critical uses, Infineon seem to have well-spec'd uC -
their new ones all have Error Correcting Flash, and 125'C models.
http://www.infineon.com/XC800
...
KHR - 2007-04-20 03:47:00
Hello,
I am looking for a GCC version for Infineon TriCore. As I found out
hightec-rt.com has such a GCC version but unfortunately they don't
give free access to the source code although GCC has a GPL license.
Does anybody know a link where I can download the sources? If not,
even a binary fo...
Alistair George wrote:
> My application needs a controlled heater fan situation, which means it
> should move a reasonable volume of air. I also need to control both
> speed and direction of fan.
> Can anyone point me to information resource that preferably uses back
> emf for speed/dire...
skysurf - 2007-12-26 09:54:00
Hello,
I just received a starterboard for the Infineon TC1766 Tricore
microcontroller (Triboard). I am trying to setup the ADC converter on the
micro to run some adc conversions, however there are no examples on how to
configure the micro for ADC conversions. Would anyone know where I can
get a...
xc_user - 2006-05-12 08:08:00
Hello and thanks for takeing time to read this email.
I got Infineon XC164CS processor (Step AA) on SK-XC164 (Industrial
controller starter kit). Development tools are Tasking (from Altium) and
programming tool is MemTool (from Infineon).
I can program the device (MemTool programs it, and veri...
Jukka Marin wrote:
>
> Somebody make a small chip with 256 kB or more FLASH, 64 kB SRAM,
> 10/100 Mbps Ethernet and some UARTs, timers etc.. :-)
This new Infineon TC1130 device looks 'packed'
One of the few I've seen with all 3 : Ethernet/CAN/USB
- 10/100 Ethernet
- USB
- 4 x C...
Rene - 2004-03-02 13:25:00
Hello folks,
I am looking for an ISDN U transceiver in 3.3V technologie. So far I've
checked Motorolas MC145572 (5V) and some Infineon parts. The older Infineon
parts are 5V too and the SMINT series are a bit of an overkill (intelligent
NT chip with U and S/T transceiver).
Does anyone know ...
In article , Petar Silic
writes
>
> hi,
>
> I have a project with philips p89lpc921, and need to use it as standard 8051
>
> now, this two chips have different clocks per cycle, as I understood,
>
> so delay and timer do not work corectly
The timers DO work correctly.
The st...
StoneThrower - 2009-04-16 12:44:00
> older Dell.
I'm thinking the same (embedded?) thing (i.e. getting older machine to do
some new job).
You may encounter slight incompatibility between chipsets and DDR memories.
Not all DDRs will work on any chipset.
No brainer is Infineon DDR333/PC2700, for a handfull fo $$$ like these:
...![Re: [OT] -- Memory Vendors](http://cdn.embeddedrelated.com/images/
icon_more.jpg)
-jg - 2007-03-19 04:57:00
It seems Atmel are doing the next logical thing, and releasing FLASH
variants of their
AVR32.
See:
http://www.ecnasiamag.com/print.asp?id=13245
Top MHz still seems to be Flash constrained - we've been stuck in the
50-100MHz zone
for what seems like years....
Seems to make the Cortex ...
tguclu - 2007-08-07 06:03:00
Hi
Does anyone used a peripheral IC for HDLC/SDLC implementation ? Can
you advice me ?
I'm undecided between Infineon 20542(2 Channel Serial Optimized
Communication Controller
with DMA-SEROCCO-D) and Zilog's Z85C30
What I need is ;
-3x USART outputs (i will have to use 2xIC's for that)
-SD...
Jim Granville - 2007-02-16 14:20:00
There have been a few threads over time about higher temperature uC.
This news from Infineon on their XC866-HOT family is relevent - they
claim to have 140'C operate, full spec, and 100K flash operations at
140'C - price of e1.80/10K also is not 'niche' pricing, and
could target system wa...
2008-02-17 17:00:00
Hi,
We have an Infineon TC1100 processor connected to a 4Mx32 SDRAM (Micro
Mt48LC4M32B2).
Examining the memory signals with a logic analyser, the SDRAM is being
correctly written, refreshed and read.
However, although we can see the expected data being output on a read
command, the data d...
Chris Hills wrote:
> In article , diggerdo
> writes
>
> > Most 8051s out there are still divide by 12 ... really slow.
> > Move away from the divide by 12 die, and you are back to single sourced.
> > There are a few "triplers" with divide by 4 (Maxim AKA DS),
> > and a smaller numb...
2005-01-05 15:06:00
For an existing motor control application, we're considering upgrading
from our current ROMless ST10R167 processor to newer one with onboard
flash to get faster execution. One of the main attractions of the
Infineon XC16X chips is JTAG debugging, with excellent code and onboard
peripheral compat...
Janvi - 2004-01-16 08:16:00
have a Infineon Demo Board with the XC164 here but the bus speed seems
wrong.
I have 2 boards with same behavior and there is also a version with the
XC161.
Wrote asm example to tx a serial char at asc0 and this appears to have about
1,9 kbaud
of speed while I expect 9,6kbaud with 40Mhz bus sp...
the rest - 2005-09-13 05:17:00
Is There someone that use this micro?
...
Simon,
go to the vendor's websites. (www.infineon.com , www.microchip.com )
Download the datasheet and user manual of each device and compare
architecture and features.
The C500 as I recall is an Infineon 8051 derivative.
So your job is to compare the 8051 architecture with the PIC.
Rather...
Janvi - 2004-02-08 16:08:00
we have 2 Infineon Demo boards V202b for the XC164
and the XC161. In the meantime my application runs
well including correct speed and PLL but the thing
crashs if a NMI occurs. The correct vector location
(n+8) has been terminated by RETI and I assume this
is correct.
Now I tried to load the...
I'm happy that you got it going.
...
Casey - 2004-10-02 11:51:00
dasdd said...
> which CPU are you using?
Coldfire 5282
Infineon C165
Casey
...
Hi,
I'm doing driver for Infineon TwinCAN 82c900 - controller and I'm having
major problems with error handling. The driver works fine when only sending
and receiving with out errors. But if error occurs then the problem begans.
I don't want to explain what I have tried since I've tried ever...
I figured he wanted to know which instruction set of the LCD, but for
the micro it is an Infineon 80C535.
...
roger - 2005-10-18 15:08:00
I originally tried unchecking verify and use map checkboxes.
Maybe you have a tiny hex file that I can try to load ?
My target processor is Infineon C166S.
...
Niklas Holsti - 2008-01-07 06:34:00
Tim Frink wrote:
> > > I'm experimenting with an instruction set simulator for an
> > > Infineon DSP.
> >
> > Specifically which processor/chip? Hard to answer without this...
>
>
> Thank you for your answer.
>
> The simulator is from the tricore-gcc suite and is implemented
> f...
Jim Granville - 2007-11-02 20:13:00
larwe wrote:
> On Nov 2, 10:45 am, Markus Zingg wrote:
>
>
> > I wonder if the AVR32 is (in particular either the AT32UC3A1512 or
> > AT32UC3A0512) is already available anywhere in quantities of ~100 pcs?
>
>
> Every time someone reminds me of the AVR32's existence, I find mys...
Hi
where can i find an application to see how to connect an C16x - Controller
to SMSC LAN91c96 ? I only want to see if i am on the right way ;-)
Thanks
Frank
...
roger - 2005-11-14 18:27:00
I need data on pinouts for Infineon PMB7850E.
...
dathome - 2007-07-16 16:45:00
Hi Raj,
This depends on how much detail you need! I've written my own small drivers
for C164 and have also used drivers from Vector. The Vector ones are pretty
daunting to get started with and it's unlikely you'll be able to get hold of
them anyway unless you know someone ;-). However it...
This link might help also. I found it searching Google with keywords: C167CR
TASKING.
http://www.hitex.co.uk/c166/xram.html
...
allievo - 2008-10-29 11:13:00
Hello,
I just received a Triboard for the Infineon TC1766 Tricore
microcontroller. I am trying to setup the SPI comunication with the
eeprom on the board, however there are no examples on how to configure
the micro. Would anyone know where I can
get an example of SPI implementation for the ...
Jac - 2006-01-12 14:15:00
Hello,
Does anyone has experience with the Cypress CY7C67300 USB chip. I want to
read it by using the HPI protocol.
I have a PCB with a C167 infineon microcontroller connected to this chip.
I have tried but I can't get it working. Can anybody give me some hints.
Jac.
...
larwe - 2007-03-09 10:09:00
On Mar 9, 10:14 am, David Brown
> > 1. 2.4 Ghz vs 433 Mhz - 2.4Ghz is easier to impliment and cheaper but
> > doesn't travel through walls well.
>
> The price and complexity depends on your application type. I have
> mostly required two way communication with various types of data,
>...
Alexander - 2007-05-03 07:41:00
Hello
I have a CAN-Modul with an 8 Bit CAN controller from Infineon
(SAF-C515C-8EM).
The Busload is about 30%.
Sometimes the controller has problems to set the Stuffbit on the right
possition.
For example:
He sends 6 recessive Bits and than a dominant Bit.
But after 5 equal Bits must fol...
|
1 |
2 |
3 |
4 |
5 |
next