F.Y.I

Excuse me for my little knowledge in pc104.

What is the easiest way to communicate between a pc104 and a ordinary
pc, is it possible by pci slot ?
In order to do that do I need the pc104+ ?

thanks

adi wrote:
> 
> F.Y.I
> 
> Excuse me for my little knowledge in pc104.
> 
> What is the easiest way to communicate between a pc104 and a ordinary
> pc, is it possible by pci slot ?
> In order to do that do I need the pc104+ ?

You can plug a PC104 card into an ISA bus connector by using an adaptor
board.  But you may have a problem finding a PC with an ISA bus
connector these days.  They still exist, but have gotten rather pricey.  

You can do the same thing with a PC/104+ board, plugging it into a PCI
slot using an adaptor card.  But I have not seen many of these.  It is
very hard to make an adaptor card that meets the PCI spec, in fact, I
don't think it is actually possible unless a bridge chip is used.  But
look around, I bet they are available somewhere.  

-- 

Rick "rickman" Collins

r...@XYarius.com
Ignore the reply address. To email me use the above address with the XY
removed.

Arius - A Signal Processing Solutions Company
Specializing in DSP and FPGA design      URL http://www.arius.com
4 King Ave                               301-682-7772 Voice
Frederick, MD 21701-3110                 301-682-7666 FAX