Sign in

username:

password:



Not a member?

Search Comp.Arch.Embedded



Search tips

embedded by Keywords

68HC11 | 68HC12 | 8051 | 8052 | ARM | ARM7 | Asic | AT91 | AT91RM9200 | Atmel | AVR | AVRStudio | Bootloader | CFP | CompactFlash | Cygnal | Cypress | Dataflash | DSP | eCos | EEPROM | Embedded Linux | Emulator | Endian | Ethernet | Firewire | FPGA | Freescale | GCC | GNUARM | GSM | H8 | HDLC | I2C | Infineon | Interrupts | Java | JTAG | LCD | LED | LPC2000 | MCU | Microchip | MMC | MPLAB | MSP430 | PC104 | PCB | PCI | PCMCIA | PowerPC | Rabbit | RS232 | RS485 | RTOS | SBC | SDRAM | Sensor | SPI | STK500 | UART | UML | USART | USB | Verilog | VHDL | VxWorks | Xilinx

Discussion Groups

Discussion Groups | Comp.Arch.Embedded | Need RTOS & SSH for ARM-based remote terminal

There are 2 messages in this thread.

You are currently looking at messages 0 to 2.

Need RTOS & SSH for ARM-based remote terminal - Sean_Q_ - 17:50 19-07-08



Processor is Atmel AT91SAM7XC256 connected by GSM modem. The client has
specified "encryption". I think it needs a formal RTOS and Secure Shell;
client says "get it working ASAP first and we'll add encryption later."

Any recommendations? btw the eCosPro SSH middleware seems to be server
only, not client.

TIA, Sean_Q_

Re: Need RTOS & SSH for ARM-based remote terminal - JeffR - 20:11 21-07-08

>Processor is Atmel AT91SAM7XC256 connected by GSM modem. The client has
>specified "encryption". I think it needs a formal RTOS and Secure Shell;
>client says "get it working ASAP first and we'll add encryption later."
>
>Any recommendations? btw the eCosPro SSH middleware seems to be server
>only, not client.
>
>TIA, Sean_Q_
>

Uboot + denx ARM version of ELDK.  If you want a secure wrapper beyond
what's in ELDK, try the enhancements that NSA developed SELinux.

http://denx.de/en/News/WebHome
http://www.nsa.gov/selinux/index.cfm

Jeff
http://www.e2atechnology.com