Embedded Programming Video Course Teaches RTOS
From basic foreground/background loops to priority-inheritance protocols, this free video course walks you through building and improving an RTOS step by step. Lessons cover manual context switching, round-robin and preemptive priority schedulers, efficient thread blocking, and synchronization primitives. The series finishes with a practical port to a professional RTOS in the QP/C ecosystem, showing semaphores, mutexes, and ways to prevent priority inversion.
The Hardest Bug I Never Solved
A single overlooked sentence in the STM32 datasheet turned intermittent startup resets into a major time-leach. Senior engineers chased DMA buffers and overflows for hours until Unni discovered the ISR vector table had been relocated to RAM with only 256 byte alignment while the MCU required 512 bytes. The misalignment caused interrupts to jump to the reset handler, and fixing the alignment stopped the reboot loop for good.
Linear Feedback Shift Registers for the Uninitiated, Part XVI: Reed-Solomon Error Correction
Jason Sachs demystifies Reed-Solomon codes with hands-on examples and pragmatic tips for embedded engineers. The article shows why RS encoding is just polynomial division in GF(2^m), why decoding is mathematically heavier, and how to implement encoders in Python and in C-friendly form using LFSRs and table-driven methods. Read this for working code, generator-polynomial examples, and an embedded-minded view of RS practicalities.
Linear Feedback Shift Registers for the Uninitiated, Part VII: LFSR Implementations, Idiomatic C, and Compiler Explorer
Jason Sachs takes LFSR theory back to real hardware, showing multiple C implementations and dsPIC33E assembly to squeeze cycles out of Galois LFSR updates. He digs into idiomatic C pitfalls like rotate idioms, demonstrates tricks using unions and 16/32-bit views, and shows when inline assembly with SL/RLC and conditional-skip instructions pays off. The article also uses Compiler Explorer and supplies an MPLAB X test harness for verification.
Lazy Properties in Python Using Descriptors
Python descriptors let you outsource attribute lookup, and Jason Sachs walks through a practical use: lazy, cached properties. He presents a LazyProperty descriptor that defaults to a WeakKeyDictionary cache so computed results are stored on first access and automatically purged when objects are garbage collected. The post shows how to share caches by value using attrkey or swap cache classes for different use cases.
Continuous Integration for Embedded Systems
Hardware dependencies make continuous integration for embedded systems harder than for pure software, yet it is essential for quality and faster feedback. This post explains the three CI types, host, non-host and hardware-in-the-loop, then compares trade-offs in cost, parallelism, timing accuracy and portability. It also outlines steps in a typical CI pipeline and highlights practical tools and plugins, including Jenkins and static analysis to automate builds and tests.
Tenderfoot: Embedded Software and Firmware Specialties
This post revisits an earlier Stack Overflow answer and breaks embedded firmware into practical specialties, from assembly optimization and device drivers to DSP, IoT networking, security, UI, and systems architecture. It outlines the core skills, tools, and math each specialty demands, and explains how product constraints and industries shape those roles. Newcomers get clear guidance on where to focus their learning and career development.
Embedded Toolbox: Source Code Whitespace Cleanup
Trailing whitespace and mixed end-of-line conventions can silently break preprocessing or bloat diffs, yet they are invisible in editors. QClean is a tiny, blazingly fast CLI utility that removes trailing spaces, normalizes EOLs, replaces tabs with spaces, and optionally flags long lines. It runs cross-platform or as a native binary in qtools/bin and is easy to customize and rebuild for your workflow.
Linear Feedback Shift Registers for the Uninitiated, Part II: libgf2 and Primitive Polynomials
Jason Sachs digs into practical finite-field arithmetic for LFSRs, using his libgf2 Python library as the hands-on guide. He shows how to test whether a polynomial is primitive, why that matters for maximal-length sequences, and how the library implements addition, multiplication, exponentiation, and shifts over GF(2). The post is both a math refresher and a code walkthrough for engineers who want to compute with LFSRs instead of just talk about them.
Embedded Toolbox: Windows GUI Prototyping Toolkit
You can prototype and debug complex embedded device user interfaces on Windows using the tiny, free QWin toolkit. It runs the same C code you compile for the target by implementing a Windows BSP, letting you develop UI code quickly with MinGW or Visual C++ and a visual resource editor. The result is far faster compile-run-debug cycles and a simpler path around flaky prototype hardware.
Embedded Programming Video Course Teaches RTOS
From basic foreground/background loops to priority-inheritance protocols, this free video course walks you through building and improving an RTOS step by step. Lessons cover manual context switching, round-robin and preemptive priority schedulers, efficient thread blocking, and synchronization primitives. The series finishes with a practical port to a professional RTOS in the QP/C ecosystem, showing semaphores, mutexes, and ways to prevent priority inversion.
STM32 VS Code Extension Under The Hood
ST's STM32 VS Code extension hides useful CMake projects and VS Code tasks behind a friendly UI, but understanding what it generates lets you bend it to your needs. This video peels back the layers to show the generated CMake files, how to modify them, how to add a VS Code-invokable flash task, and how to enable C++ support alongside C. The STM32 F0 example and flash task are available on GitHub.
More than just a pretty face - a good UI is essential
A user interface can make or break a device - determining its success in the marketplace. With careful design, the UI can make the product compelling and result in a high level of satisfaction from new and experienced users.
Developing software for a safety-related embedded system for the first time
Developing a safety-related embedded product is not the same as writing ordinary firmware, and this article lays out eight practical steps to get you started. Using a washing-machine controller as a running example, it covers scoping, key requirements, hazard analysis, applicable standards, platform and MCU choices, runtime monitoring, and prototyping. The checklist helps teams prepare for verification, testing, and later certification work.
Dark Corners of C - The Comma Operator
Ever seen a line like if (!dry_run && ((stdout_closed = true), close_stream(stdout) != 0)) and wondered what that comma means? Stephen Friederichs unpacks the rarely-discussed C comma operator, shows a circular-buffer example where it seemed to simplify looping, then demonstrates how precedence and readability problems (and even MISRA C bans) make it dangerous in practice. Read on for practical uses and cautionary lessons.
Review: Embedded Software Design: A Practical Approach to Architecture, Processes, and Coding Techniques
Jacob Beningo's Embedded Software Design is a practical, discipline-first guide to building reliable embedded systems. It frames development around a software triad: architecture, Agile/DevOps processes, and coding techniques, with security integrated from the start. The book mixes principles with hands-on recipes and includes appendices that walk through GitLab CI/CD and TDD examples you can reuse on real projects.
C Programming Techniques: Function Call Inlining
Fabien Le Mentec shows how you can keep clean C interfaces while recovering the cycles lost to function call overhead. The post demonstrates static inline and header inclusion techniques, then compares generated ARM assembly for an inlined versus non inlined bit test. Read it to see concrete assembly differences, compiler hints, and the practical trade off between speed and code size on embedded targets.
Jaywalking Around the Compiler
Messing with inline assembly can feel powerful until the compiler silently undoes you. Jason Sachs walks through a real bug on a Microchip dsPIC33E where pushing CORCON and writing a fixed value corrupts compiler-managed state and produces wrong results when the compiler reorders code. The post shows why the stack and certain registers are off-limits to raw inline asm, and gives practical, safe patterns to save and restore mode bits.
Getting Started With Zephyr: Devicetree Bindings
This blog post shines some light on how devicetrees are used in The Zephyr Project. Specifically, we understand the mechanisms that enable us to use nodes in the devicetree in the C source files. We use a sample provided in the Zephyr repository itself and work our way through portions of the Zephyr codebase to get insight into the mechanisms that make this possible.
Embedded Developers, Ditch Your IDEs – Here’s Why!
Ditching your Integrated Development Environment (IDE) temporarily can be a transformative learning experience in embedded development. This post invites you to explore the underpinnings of IDEs by delving into alternative tools and processes like Makefile, CMake, Vim, GDB, and OpenOCD. Understanding these tools can demystify the background operations of IDEs, revealing the intricacies of compiling, linking, and debugging. This journey into the “under the hood” aspects of development is not just about learning new tools, but also about gaining a deeper appreciation for the convenience and efficiency that IDEs provide. By stepping out of your comfort zone and experimenting with these alternatives, you can sharpen your skills, enhance your knowledge, and possibly discover a more tailored and streamlined development experience. Whether you're a novice or a seasoned developer, this exploration promises insights and revelations that can elevate your embedded development journey.
Tenderfoot: Embedded Software and Firmware Specialties
This post revisits an earlier Stack Overflow answer and breaks embedded firmware into practical specialties, from assembly optimization and device drivers to DSP, IoT networking, security, UI, and systems architecture. It outlines the core skills, tools, and math each specialty demands, and explains how product constraints and industries shape those roles. Newcomers get clear guidance on where to focus their learning and career development.
How to install Ubuntu 12.04 Precise, Xubuntu-desktop and Open JDK-7 on Beagleboard Rev. C2
Want to run Java GUI apps on a BeagleBoard Rev C2? This hands-on post walks through installing Ubuntu 12.04, adding the Xubuntu desktop, and getting OpenJDK-7 running, including SD flashing, u-boot and network setup, display and audio tweaks, and a fix for XFCE login ownership problems. Follow the exact commands and small workarounds the author used to get a monitor, sound, and Java VM working on the board.
An Iterative Approach to USART HAL Design using ChatGPT
Discover how to leverage ChatGPT and an iterative process to design and generate a USART Hardware Abstraction Layer (HAL) for embedded systems, enhancing code reusability and scalability. Learn the step-by-step journey, improvements made, and the potential for generating HALs for other peripherals.
Lightweight C++ Error-Codes Handling
The traditional C++ approach to error handling tends to distinguish the happy path from the unhappy path. This makes handling errors hard (or at least boring) to write and hard to read. In this post, I present a technique based on chaining operations that merges the happy and the unhappy paths. Thanks to C++ template and inlining the proposed technique is lightweight and can be used proficiently for embedded software.
Some Embedded System Software Design Resources
Embedded systems span many architectures and run-times, so there is no single definitive resource. This curated list brings together practical embedded-focused books by Elecia White and Jacob Beningo, general design guidance from Robert Martin, and a TDD primer by James W. Grenning, plus concrete advice on BDD-style TDD and off-target testing. Skim the list in a day, then try the techniques hands-on.
Dark Corners of C - The Comma Operator
Ever seen a line like if (!dry_run && ((stdout_closed = true), close_stream(stdout) != 0)) and wondered what that comma means? Stephen Friederichs unpacks the rarely-discussed C comma operator, shows a circular-buffer example where it seemed to simplify looping, then demonstrates how precedence and readability problems (and even MISRA C bans) make it dangerous in practice. Read on for practical uses and cautionary lessons.
On hardware state machines: How to write a simple MAC controller using the RP2040 PIOs
Hardware state machines are nice, and the RP2040 has two blocks with up to four machines each. Their instruction set is limited, but powerful, and they can execute an instruction per cycle, pushing and popping from their FIFOs and shifting bytes in and out. The Raspberry Pi Pico does not have an Ethernet connection, but there are many PHY boards available… take a LAN8720 board and connect it to the Pico; you’re done. The firmware ? Introducing Mongoose…
Favorite Tools - Look Up Tables
Look up tables are one of the simplest but most effective tools in an embedded engineer's toolbox, and this post shows why. Using a keypad example the author demonstrates a static table of key behaviors that packs repeat rates, enum mappings, and debug names into one place so changing behavior or adding keys is trivial. The article also outlines other uses like state machines and UI internationalization.
Video-Based STEM Embedded Systems Curriculum, Part 1
This curriculum shows how to teach introductory embedded systems using free online videos and low-cost kits, suitable for middle-school, high-school, college, or adult learners. It packages curated educator recommendations, a per-student equipment and book list, essential free software, and core lesson topics like Arduino, MicroPython, Kicad board design, soldering, and RTOS basics. The approach stresses hands-on labs, safety, backups, mentorship, and adapting to local budgets.
[ C Programming Techniques: integer type optimization ]
Microcontroller integer width can make or break ISR performance on AVR. In this post Fabien Le Mentec compares using uint8_t versus unsigned int for a timer counter on an ATmega328P and shows how the smaller type cuts instruction and cycle count in the ISR. He also walks through the trade offs: reduced capacity, volatile access costs, and simple portability fixes such as uint_fast8_t or an architecture-aware typedef.
