Coding Step 1 - Hello World and Makefiles
Stephen Friederichs walks through compiling a C Hello World using GCC on Windows, then shows how a simple makefile can automate the process. You will see how output naming, project layout, and makefile targets work, and learn dependency rules based on timestamps plus how to force rebuilds with clean and FORCE targets. This is a practical first step to escape the IDE and use Unix-style build tools.
Important Programming Concepts (Even on Embedded Systems) Part V: State Machines
State machines are not glamorous, but they solve a lot of real embedded problems. Jason Sachs uses a motorized couch example to show how FSMs and Harel statecharts expose corner cases, simplify timing constraints, and make behavior easier to specify and review. The article walks through hand-rolled switches, tabular implementations, the state pattern, libraries like QP and Boost, and tool tradeoffs.
Coding - Step 0: Setting Up a Development Environment
Stephen Friederichs walks through setting up a minimal C development environment without an IDE, focusing on Windows. He explains why learning command-line toolchains matters, recommends GCC and Make as a durable base, and gives step-by-step MinGW installation and PATH configuration plus editor suggestions. The guide gets you compiling with mingw32-make and gcc so you can move on to makefiles and project structure.
Important Programming Concepts (Even on Embedded Systems) Part IV: Singletons
Singletons are convenient but often a modularity killer, especially in embedded firmware. Jason Sachs walks through the many faces of singletons, from static members and globals to hardware registers and user-visible application singletons, and shows practical ways to avoid tight coupling. Read this for concrete embedded examples and pragmatic fixes like passing state explicitly, using interfaces or factories, and isolating unavoidable globals in a HAL.
The CRC Wild Goose Chase: PPP Does What?!?!?!
Jason Sachs walks through a CRC rabbit hole and explains why ambiguous CRC names and incomplete specs lead to subtle protocol bugs. He demonstrates how XMODEM and KERMIT variants with a zero initial value can miss dropped leading-zero bytes, praises the X.25 standard for providing test vectors and a clear CRC16 definition, and warns that RFCs that ship only sample code are a poor substitute for a proper specification.
Important Programming Concepts (Even on Embedded Systems) Part III: Volatility
Jason Sachs takes volatility out of the basement and into practical embedded programming. He shows why data that can change outside your thread of control breaks assumptions, how the volatile qualifier in C/C++ and Java affects compiler and CPU behavior, and when to prefer shadow registers, locks, or proper concurrency libraries instead of ad hoc volatile usage.
Introduction to Microcontrollers - Ada - 7 Segments and Catching Errors
Mike demos an Ada implementation of a multiplexed 7-segment driver on the STM32F407 Discovery board, highlighting Ada idioms like protected objects for ISRs and packed-boolean GPIO mapping. The post shows practical timer setup for Timer 6, how to avoid ARR/CNT races, and how Ada's runtime range checks plus a last-chance handler surface out-of-range errors with file and line diagnostics.
Important Programming Concepts (Even on Embedded Systems) Part II: Immutability
Immutable data can make embedded code easier to reason about, reduce concurrency bugs, and eliminate defensive copies. Jason Sachs walks through practical techniques that work in resource-constrained systems, from using const and pseudo-immutability to separating old and new state, to the limits of fully persistent data structures when you lack dynamic memory. The article also compares register-level state flow and advocates message passing as a concurrency alternative.
Important Programming Concepts (Even on Embedded Systems) Part I: Idempotence
Idempotence is a simple design principle that prevents duplicate effects when operations are retried or repeated. Jason Sachs shows why it matters in embedded systems, from HTTP submit buttons and capacitive touch inputs to garage-door remotes and SPI DAC writes. Read this post to learn three practical idempotent techniques and when redundant writes are a sensible reliability trade-off.
Project Directory Organization
A tidy project tree can make a bigger difference than you might think. Stephen Friederichs lays out a practical directory scheme for small software projects, using familiar folders like src, obj, bin, test, reports, docs, and conf to keep builds, tests, and documentation from turning into a mess. He also explains why the root directory should welcome contributors, not confuse them.
C++ on microcontrollers 4 – input pins, and decoding a rotary switch
Wouter van Ooijen shows how to extend a small C++ I/O library for microcontrollers to support input pins and mixed I/O, and how to decode a rotary switch reliably. The post walks through a safe class hierarchy for input, output, and bidirectional pins, then builds a quadrature decoder with a saturating counter and an HC595 seven-segment demo you can run on LPCXpresso hardware.
Linear Feedback Shift Registers for the Uninitiated, Part VII: LFSR Implementations, Idiomatic C, and Compiler Explorer
Jason Sachs takes LFSR theory back to real hardware, showing multiple C implementations and dsPIC33E assembly to squeeze cycles out of Galois LFSR updates. He digs into idiomatic C pitfalls like rotate idioms, demonstrates tricks using unions and 16/32-bit views, and shows when inline assembly with SL/RLC and conditional-skip instructions pays off. The article also uses Compiler Explorer and supplies an MPLAB X test harness for verification.
Lightweight C++ Error-Codes Handling
The traditional C++ approach to error handling tends to distinguish the happy path from the unhappy path. This makes handling errors hard (or at least boring) to write and hard to read. In this post, I present a technique based on chaining operations that merges the happy and the unhappy paths. Thanks to C++ template and inlining the proposed technique is lightweight and can be used proficiently for embedded software.
Embedded Space & Software Development Practices
Kunal Singh describes how embedded development has moved from tiny assembly routines to full applications running on operating systems with threads and libraries. He warns the era of "simple" firmware is ending, and urges embedded engineers to adopt fundamentals like maintainability, reusability, testability, low coupling, and clean interfaces. He recommends Agile Software Development and Code Complete as practical starting points.
How to make a heap profiler
A heap profiler is surprisingly simple to build, and Yossi Kreinin walks through a compact working example called heapprof. The post shows how to intercept malloc/free, stash per-allocation metadata and call stacks into heap chunks, dump memory on crash or via JTAG, and map return addresses to source lines with addr2line or gdb. It also covers practical bootstrapping tricks for platforms without standard libc support.
Coding Step 4 - Design
Good embedded software design is about more than making code work, it is about making it readable, reusable, testable, debuggable, robust, and efficient. In this installment of the Coding Step series, Stephen Friederichs uses an AVR-based “Hello World” example to show how those goals shape naming, file structure, UART buffering, watchdog use, and heartbeat LEDs. The result is a practical design walkthrough that turns style and architecture choices into engineering advantages.
Favorite Tools - Look Up Tables
Look up tables are one of the simplest but most effective tools in an embedded engineer's toolbox, and this post shows why. Using a keypad example the author demonstrates a static table of key behaviors that packs repeat rates, enum mappings, and debug names into one place so changing behavior or adding keys is trivial. The article also outlines other uses like state machines and UI internationalization.
Ada 2012 for ARM M3/M4 Released for Download
AdaCore's initial Ada 2012 port for ARM Cortex M3/M4 is now downloadable, and Mike Silva walks it through a hands-on demo on an STM32F4 Discovery board. He shows an Ada-written LCD driver, LED multitasking, and how Ada language features like Ada.Realtime, array slices, and unchecked conversions make low-level GPIO and timing code clearer and safer. The post highlights atomic BSRR GPIO writes and Ravenscar runtime details.
Tenderfoot: Recommended Reading
Twenty years on, these are the books that turned an electrical engineer into an embedded software pro. Matthew Eshleman walks through influential reads from Code Complete to Practical Statecharts and Test Driven Development, explaining how each shaped his design, estimation, and testing practices. This short list is a practical starting point for 'tenderfoots' launching an embedded firmware career.
Embedded Firmware Refactoring, Optimisation and Migration
Legacy embedded products often hit CPU, memory, or power limits long before customers stop wanting new features. This article lays out three practical paths: squeeze more from the current build with optimisation, make the codebase maintainable through refactoring, or port firmware to new hardware when constraints demand it. Read on for a pragmatic view of when each approach makes sense and how to reduce risk.
Handling Translations in an Embedded Project
A brief walkthrough on how to handle human language translations in a low level C application. Some options are listed, each with advantages and disadvantages laid out.
Hidden Gems from the Embedded Online Conference Archives - Part 2
A look back at a deep dive into the Mars Perseverance flight software from one of the technical leads at JPL.
Can an RTOS be really real-time?
Real-Time Operating Systems are meant for real-time applications. But with conventional shared-state concurrency and blocking, can you honestly know the worst-case execution time of an RTOS thread?
More than just a pretty face - a good UI is essential
A user interface can make or break a device - determining its success in the marketplace. With careful design, the UI can make the product compelling and result in a high level of satisfaction from new and experienced users.
Hidden Gems from the Embedded Online Conference Archives - Part 1
Discussion of a "hidden gem" from the Embedded Online Conference archives!
How to Deploy Local LLMs for Embedded Software Development: Terminology and Motivation
In this blog post series, I walk you through creating a fully local, offline AI pipeline. In this first post, I outline the motivation and relevant terminology that are important before we dive into hardware selection and implementation of the pipeline.
Small or fast?
Developers of software for desktop computers take code optimization for granted. Embedded developers typically need to pay much more attention to the details
When a Mongoose met a MicroPython, part II
In the first part of this blog, we introduced this little framework to integrate MicroPython and Cesanta's Mongoose; where Mongoose runs when called by MicroPython and is able to run Python functions as callbacks for the events you decide in your event handler. Now we add MQTT to the equation, so we can subscribe to topics and publish messages right from MicroPython.
Embedded Toolbox: Source Code Whitespace Cleanup
Trailing whitespace and mixed end-of-line conventions can silently break preprocessing or bloat diffs, yet they are invisible in editors. QClean is a tiny, blazingly fast CLI utility that removes trailing spaces, normalizes EOLs, replaces tabs with spaces, and optionally flags long lines. It runs cross-platform or as a native binary in qtools/bin and is easy to customize and rebuild for your workflow.
Bellegram, a wireless DIY doorbell that sends you a Telegram message
A wireless button that uses the M5 STAMP PICO and Mongoose to send a Telegram message when pressed. The code is written in C





















