Peripheral Interaction Without a Linux Device Driver Using Spidev
Kernel-space drivers are not always necessary; many SPI peripherals can be handled from userspace using spidev. This post shows how to expose an SPI device through the device tree and kernel, wire a Bosch BMP388 to a Toradex Apalis iMX8 Ixora board, and implement a C userspace app that uses ioctl to read the chip ID. Practical tips on SPI settings and logic-analyzer validation are included.
Getting Started With Embedded Linux - From Nothing To A Login Prompt
This hands-on guide shows how to go from a blank board to a bootable embedded Linux system using Yocto and Docker. Follow the steps to build a reproducible Yocto environment, fetch Toradex manifests, set MACHINE to verdin-imx8mm, run bitbake, and produce the .wic.bmap image ready to flash. Ideal for engineers wanting a concise bringup path for a Verdin iMX8M Mini on a Dahlia carrier.
Dumb Embedded System Mistakes: Running The Wrong Code
Running the wrong firmware on a board can waste hours. This post shows a practical marking strategy for embedded Linux that embeds searchable proof-of-life strings into kernel, rootfs, overlay, and application code. It walks through choosing early-boot log points, using compile-time timestamps, and a small shell script to set, find, and clear marks so you can verify builds before flashing.
Review: Hands-On RTOS with Microcontrollers
Brian Amos's Hands-On RTOS with Microcontrollers delivers a practical path from bare-metal to full RTOS applications using FreeRTOS on an STM32 Nucleo-F767ZI board. The book combines clear explanations of concurrency, interrupts, and DMA with step-by-step toolchain setup and runnable examples that show building, debugging, monitoring, and scaling embedded systems for real projects and coursework.
Absolute Beginner's Guide To Getting Started With Raspberry Pi
Getting started with Raspberry Pi can feel overwhelming. This guide strips the noise and shows the simplest path from unboxing to a working desktop. It recommends buying a preloaded NOOBS microSD to avoid imaging hassles, lists exact parts and suppliers, and walks through booting, recovery, and making a backup. If you want embedded electronics it also lists starter parts and ESD safety tips.
Examining The Stack For Fun And Profit
Stack bloat can hide in short initialization paths, and this post walks through finding it with hands-on debugging. The author builds a tiny test program and uses gdb plus custom stack-helper scripts to scan, watch, and walk the stack. That process reveals getaddrinfo pulling in glibc DNS code that allocates large local buffers and uses alloca and PLT resolution, consuming roughly 11KB of stack.
Embedded Programming Video Course Shows How OOP Works Under the Hood
Want to see how OOP actually maps to machine level code? This free video course walks through encapsulation, inheritance, and polymorphism with hands-on comparisons between C and C++. You will inspect C implementations, compiler-generated code, and debug traces, and learn how encapsulation relates to RTOS concurrency. The polymorphism lesson reverses the usual order to expose runtime costs and previews implementing polymorphism in C.
Round-robin or RTOS for my embedded system
Manuel Herrera walks through the practical tradeoffs between bare-metal round-robin loops and adopting an RTOS for embedded projects. He outlines two round-robin styles, explains how an RTOS gives independent threads and synchronization primitives, and highlights added code, licensing, interrupt latency, and the learning curve. Read this to sharpen decision criteria around timing guarantees, reuse, and whether an RTOS truly adds value to your firmware.
Linux Kernel Development - Part 1: Hello Kernel!
Skip userland and run code inside the kernel with a tiny "Hello Kernel" module that prints messages on load and unload. This introduction walks through required headers, the init and exit hooks, MODULE_* metadata, a kernel-friendly Makefile, and the basic workflow to build, insmod, rmmod and inspect messages with dmesg. It’s a hands-on first step into Linux kernel module development.
Mutex vs. Semaphores – Part 2: The Mutex & Mutual Exclusion Problems
Mutexes tackle many semaphore pitfalls by enforcing ownership and pairing lock and unlock operations, making mutual exclusion safer in RTOS code. This post explains how ownership enables recursion, priority inheritance and death detection, and why mutexes do not automatically solve circular deadlock or non-cooperative access. Read on for practical protocols such as Priority Inheritance and Priority Ceiling and a brief note on monitors.
Five Embedded Linux Topics for Newbies !
Are you an embedded systems enthusiast looking to broaden your horizons with embedded Linux? explore those 5 topics.
How to make a heap profiler
A heap profiler is surprisingly simple to build, and Yossi Kreinin walks through a compact working example called heapprof. The post shows how to intercept malloc/free, stash per-allocation metadata and call stacks into heap chunks, dump memory on crash or via JTAG, and map return addresses to source lines with addr2line or gdb. It also covers practical bootstrapping tricks for platforms without standard libc support.
Libgpiod - Toggling GPIOs The Right Way In Embedded Linux
Accessing GPIOs through sysfs is simple but fragile, causing race conditions when multiple userspace processes touch the same line. This post explains libgpiod, introduced in Linux 4.8, and shows concise Python examples on a Toradex Verdin iMX8M Plus for requesting lines, tagging the consumer, using active_low flags, and reading or driving values. Learn why libgpiod provides safer, atomic GPIO handling.
The Hardest Bug I Never Solved
A single overlooked sentence in the STM32 datasheet turned intermittent startup resets into a major time-leach. Senior engineers chased DMA buffers and overflows for hours until Unni discovered the ISR vector table had been relocated to RAM with only 256 byte alignment while the MCU required 512 bytes. The misalignment caused interrupts to jump to the reset handler, and fixing the alignment stopped the reboot loop for good.
Peripheral Interaction Without a Linux Device Driver Using Spidev
Kernel-space drivers are not always necessary; many SPI peripherals can be handled from userspace using spidev. This post shows how to expose an SPI device through the device tree and kernel, wire a Bosch BMP388 to a Toradex Apalis iMX8 Ixora board, and implement a C userspace app that uses ioctl to read the chip ID. Practical tips on SPI settings and logic-analyzer validation are included.
ANCS and HID: Controlling Your iPhone From Zephyr
In this blog post, we see how certain BLE services can be used to control an iPhone from a Nordic nRF52840 using The Zephyr Project. Specifically, we see how to control certain multimedia functionality using the HID service. Finally, we learn how to use the ANCS client library provided by Nordic in The Zephyr Project to accept or decline an incoming call.
Getting Started With Zephyr: Using GDB To Fix a Driver Bug
In this blog post, I show how to use GDB to debug an issue encountered with a TSL2591 light sensor driver in Zephyr. The fix was submitted and successfully incorporated into The Zephyr Project.
Basler pylon on Raspberry Pi with Yocto
Basler's pylon can be packaged into a minimal Raspberry Pi Yocto image in a few clear steps. This walkthrough shows how to clone poky with meta-openembedded, meta-raspberrypi and Basler's meta-basler-tools, tweak conf/local.conf to add OpenCV and accept the Basler EULA, build rpi-test-image and generate an SDK for cross-compilation. It finishes by cross-compiling a pylon_example binary, copying it to the Pi and testing with a Basler acA2440-20gm.
Absolute Beginner's Guide To Getting Started With Raspberry Pi
Getting started with Raspberry Pi can feel overwhelming. This guide strips the noise and shows the simplest path from unboxing to a working desktop. It recommends buying a preloaded NOOBS microSD to avoid imaging hassles, lists exact parts and suppliers, and walks through booting, recovery, and making a backup. If you want embedded electronics it also lists starter parts and ESD safety tips.
A design non-methodology
Although writing an RTOS or kernel may be an interesting project, it is unlikely to be a wise course of action.
Surprising Linux Real Time Scheduler Behavior
An embedded Linux data acquisition project ran into puzzling UART latency whenever heavy UI animations ran. Moving all app threads to SCHED_FIFO helped but did not eliminate delays. After reading about kernel worker thread interactions, Matthew moved the UI back to the normal scheduler and the jitter vanished. The post highlights an unexpected kernel level priority inversion risk and a pragmatic workaround.
Using GPIO in (Apache) NuttX RTOS
Blinking an LED is the embedded Hello World, and this tutorial walks through using GPIOs on NuttX running on a Raspberry Pi Pico. It shows how to enable the GPIO driver and example in menuconfig, build and flash the nuttx.uf2, and use NSH gpio device files to read and write pins. The post also explains polling versus interrupt-driven inputs and the pull-up/edge setup needed for button interrupts.
Getting Started With Zephyr: DTS vs DTSI vs Overlays
Devicetrees can be daunting for traditional embedded software engineers that are new to Zephyr. In this blog post, I address these fears and show how navigating Devicetrees can be much easier if you understand that they represent the layered structure of the underlying hardware.
Introduction to Deep Insight Analysis for RTOS Based Applications
Debugging can consume over 40% of a development cycle, and Jacob Beningo argues RTOS projects need more than breakpoints and assertions. He presents deep insight analysis as a trio of techniques—RTOS-aware debugging, run-time analysis, and profiling with coverage—that expose what the system is actually doing. These methods help engineers cut guesswork and speed verification of complex embedded applications.
Getting Started With Embedded Linux - From Nothing To A Login Prompt
This hands-on guide shows how to go from a blank board to a bootable embedded Linux system using Yocto and Docker. Follow the steps to build a reproducible Yocto environment, fetch Toradex manifests, set MACHINE to verdin-imx8mm, run bitbake, and produce the .wic.bmap image ready to flash. Ideal for engineers wanting a concise bringup path for a Verdin iMX8M Mini on a Dahlia carrier.
The Hardest Bug I Never Solved
A single overlooked sentence in the STM32 datasheet turned intermittent startup resets into a major time-leach. Senior engineers chased DMA buffers and overflows for hours until Unni discovered the ISR vector table had been relocated to RAM with only 256 byte alignment while the MCU required 512 bytes. The misalignment caused interrupts to jump to the reset handler, and fixing the alignment stopped the reboot loop for good.
What is “real time”?
The post clarifies the technical meaning of “real time” for embedded systems and contrasts it with the colloquial sense of immediacy. It presents a precise definition: a real-time system’s correctness depends on both logical results and the time at which those results are produced, so missing timing constraints constitutes failure. The article emphasizes determinism — low variance in operation timing — as the key property of real-time systems, and contrasts classic RTOS behavior with general-purpose Linux’s higher timing variance. It also notes that raw CPU overprovisioning can mask nondeterminism in some designs, but is not always practical, reinforcing that real time means predictable timing sufficient for the application, not simply “fast.”
Open-Source Licenses Made Easy with Buildroot and Yocto for Embedded Linux
In this article I will try to explain what are the copyrights/copyleft, what are the popular opensource software licenses, and how to make sure that your Embedded Linux system complies with them using popular build systems ; Buildroot or YOCTO projec
Zephyr: West Manifest For Application Development
In this blog post, I show a simpler way to create custom West manifest files. This technique eliminates the need to duplicate the complex West manifest from upstream Zephyr. I also show how we can use the West manifest to include out-of-tree board and SoC definitions, and include our own out-of-tree drivers.
How to use SPI devices in NuttX RTOS
You can get an SPI sensor running on NuttX in minutes by following a concrete RP2040 example. This post walks through the board glue code, Makefile and header edits, menuconfig settings, wiring, and flash steps needed to register a MAX6675 thermocouple on a Raspberry Pi Pico. Read it to learn where to add board-level code, enable drivers, and test the device from NSH.
