Ten Little Algorithms, Part 3: Welford's Method (and Friends)
Other articles in this series: Part 1: Russian Peasant Multiplication Part 2: The Single-Pole Low-Pass Filter Last time we talked about a low-pass filter, and we saw that a one-line algorithm could filter out high-frequency noise, and...
Byte and Switch (Part 1)
Imagine for a minute you have an electromagnet, and a microcontroller, and you want to use the microcontroller to turn the electromagnet on and off. Sounds pretty typical, right?We ask this question on our interviews of entry-level electrical...
C to C++: Bridging the Gap from C Structures to Classes
In our last post, C to C++: Proven Techniques for Embedded Systems Transformation, we started to discuss the different ways that C++ can be used to write embedded software. You saw that there is no reason to be overwhelmed by trying to adopt...
Picowoose: The Raspberry Pi Pico-W meets Mongoose
This example application describes the way to adapt the George Robotics CYW43 driver, present in the Pico-SDK, to work with Cesanta's Mongoose. We are then able to use Mongoose internal TCP/IP stack (with TLS 1.3), instead of lwIP (and MbedTLS).
7 Essential Steps for Reducing Power Consumption in Embedded Devices
Reducing the amount of power your embedded device is consuming is not trivial. With so many devices moving to battery operations today, maximizing battery life can be the difference between a happy, raving customer and an unhappy one that ruins your company's reputation. This post explores seven steps for optimizing your embedded systems' power consumption. You'll gain insights into the steps and techniques necessary along with receiving a few resources to help you on your journey.
When a Mongoose met a MicroPython, part II
In the first part of this blog, we introduced this little framework to integrate MicroPython and Cesanta's Mongoose; where Mongoose runs when called by MicroPython and is able to run Python functions as callbacks for the events you decide in your event handler. Now we add MQTT to the equation, so we can subscribe to topics and publish messages right from MicroPython.
Getting Started With Zephyr: Saving Data To Files
In this blog post, I show how to implement a Zephyr application to mount a microSD card, create a new file on the microSD card, and write data to it. The lessons learned from such an application can be helpful for devices out in the field that need to write data to off-board memory periodically, especially in cases where Internet access may be sporadic.
Unuglify C++ FSM with DSL
Domain Specific Languages (DSL) are an effective way to avoid boilerplate or repetitive code. Using DSLs lets the programmer focus on the problem domain, rather than the mechanisms used to solve it. Here I show how to design and implement a DSL using the C++ preprocessor, using the FSM library, and the examples I presented in my previous articles.
Using a RTLSDR dongle to validate NRF905 configuration
I am currently working on a system to monitor the garage door status from my flat. Both places are 7 floors apart, and I need to send the data wirelessly. I chose to operate on the 433MHz carrier, and I ordered 2 PTR8000...
Quaternions and the spatial rotations in motion enabled wearable devices. Exploiting the potential of smart IMUs attitude estimation.
Have you always wondered what a quaternion is? this is your post. Attitude or spatial orientation analysis is a powerful element in wearable devices (and many other systems). Commercially available sensors can provide this information out-of-the-box without requiring complex additional implementation of sensor fusion algorithms. Since these are already on-chip solutions devices can serve as a way to explore and analyze motion in several use cases. Mathematical analysis for processing quaternion is presented along with a brief introduction to them, Although they are not really easy to visualise, a couple fairly simple examples are provided which may allow you to gain some intuition on what's the logic behind them.
From Embedded Software Engineer to Musician
In his first blog post on EmbeddedRelated, Jean Labrosse, the author of the uC/OS series and founder of Micrium, discusses his transition from an embedded software engineer to a musician.
Jumping from MCUs to FPGAs - 5 things you need to know
Are you a microcontroller expert beckoned by the siren song of the FPGA? Not long ago, that was me. FPGA-expert friends of mine regularly extolled the virtues of these mysterious components and I wanted in. When I made the leap, I found a world seemingly very familiar, but in reality, vastly different. I found that my years of C programming and microcontroller use often gave pre preconceived interpretations of FPGA resource material which resulted in eye-roll class mistakes in my code. I’ve gleaned five things of vital importance to help you make that transition faster than I did.
Assembly language is best - except when it isn’t
A look at why writing in C often produces more efficient code than hand-written assembly language.
C to C++: 5 Tips for Refactoring C Code into C++
The article titled "Simple Tips to Refactor C Code into C++: Improve Embedded Development" provides essential guidance for embedded developers transitioning from C to C++. The series covers fundamental details necessary for a seamless transition and emphasizes utilizing C++ as a better C rather than diving into complex language features. The article introduces five practical tips for refactoring C code into C++. Replace #define with constexpr and const: Discouraging the use of #define macros, the article advocates for safer alternatives like constexpr and const to improve type safety, debugging, namespaces, and compile-time computation. Use Namespaces: Demonstrating the benefits of organizing code into separate logical groupings through namespaces, the article explains how namespaces help avoid naming conflicts and improve code readability. Replace C-style Pointers with Smart Pointers and References: Emphasizing the significance of avoiding raw pointers, the article suggests replacing them with C++ smart pointers (unique_ptr, shared_ptr, weak_ptr) and using references
Getting Started With Zephyr: Devicetrees
This blog post provides an introduction to the "Devicetree", another unique concept in The Zephyr Project. We learn about the basic syntax of a device tree and how its structure and hierarchy mirror hardware, from the SoC to the final board. We also see how hardware described in a devicetree can be referenced and controlled in the source code of a Zephyr-based application.
NULL pointer protection with ARM Cortex-M MPU
This post explains how you can set up the ARM Cortex-M MPU (Memory Protection Unit) to protect thy code from dragons, demons, core dumps, and numberless other foul creatures awaiting thee after thou dereference the NULL pointer.
Bellegram, a wireless DIY doorbell that sends you a Telegram message
A wireless button that uses the M5 STAMP PICO and Mongoose to send a Telegram message when pressed. The code is written in C
Bit-Banged Async Serial Output And Disciplined Engineering
This post covers implementing asynchronous serial output directly on a GPIO with bit-banging. This can be a valuable debug tool for getting information out of a system. It also covers disciplined engineering, using the bit-banging module as an example and template you can apply to other projects.
Static or static
The keyword static in C and C++ has multiple uses, which are not always well understood.
My friend, the compiler
Modern compilers were given great powers, but we don't always know where and when they'll use them. This may cause us to either worry needlessly or trust unjustifiably, as demonstrated by a little example in this post.
What I Learned From Crashing and Burning in Grad School
Have you ever felt so consumed by something that it started to crowd other parts of your life? So obsessed with success in a particular area that you could hardly think about anything else? I found myself in exactly that spot in 2018 when I first started graduate school; I wanted to succeed so badly that I worked myself to the bone and I let even my marriage and my health suffer in service to it. This state of being is, believe it or not, NOT conducive to success, in neither the long-term nor the short-term. But it took two authors and one pivotal book for me to understand that, to see the pit I had dug for myself, and to begin the path back out. In this blog, I want to share with you my journey in the hopes that you can avoid the mistakes I made.
Five Embedded Linux Topics for Newbies !
Are you an embedded systems enthusiast looking to broaden your horizons with embedded Linux? explore those 5 topics.
Getting Started With CUDA C on an Nvidia Jetson: A Meaningful Algorithm
In this blog post, I demonstrate a use case and corresponding GPU implementation where meaningful performance gains are realized and observed. Specifically, I implement a "blurring" algorithm on a large 1000x1000 pixel image. I show that the GPU-based implementation is 1000x faster than the CPU-based implementation.
Turn It On Again: Modeling Power MOSFET Turn-On Dependence on Source Inductance
This is a short article explaining how to analyze part of the behavior of a power MOSFET during turn-on, and how it is influenced by the parasitic inductance at the source terminal. The brief qualitative reason that source inductance is undesirable is that it uses up voltage when current starts increasing during turn-on (remember, V = L dI/dt), voltage that would otherwise be available to turn the transistor on faster. But I want to show a quantitative approximation to understand the impact of additional source inductance, and I want to compare it to the effects of extra inductance at the gate or drain.
When a Mongoose met a MicroPython
This is more a framework than an actual application, with it you can integrate MicroPython and Cesanta's Mongoose.
Mongoose runs when called by MicroPython and is able to run Python functions as callbacks for the events you decide in your event handler. The code is completely written in C, except for the example Python callback functions, of course. To try it, you can just build this example on a Linux machine, and, with just a small tweak, you can also run it on any ESP32 board.
Understanding Microchip 8-bit PIC Configuration
The second post of a five part series picks up getting started developing with Microchip 8-bit PIC Microcontroller by examining the how and why of processor configuration. Topics discussed include selecting the oscillator to use during processor startup and refining the configuration once the application starts. A walk through of the code generated by the Microchip IDE provides a concrete example of the specific Configuration Word and SFR values needed to configure the project specific clock configuration.
The Asimov Protocol
While the Internet is choke-full of explanations of basic data communication protocols, very little is said about the higher levels of packing, formatting, and exchanging information in a useful and practical way. This less-charted land is still fraught with strange problems, whose solutions may be found in strange places – in this example, a very short, 60 years old Science Fiction story.
