VHDL tutorial - Creating a hierarchical design
[quicklinks]In earlier blog entries I introduced some of the basic VHDL concepts. First, developing a function ('VHDL tutorial') and later verifying and refining it ('VHDL tutorial - part 2 - Testbench' and 'VHDL tutorial - combining clocked and...
Blinkenlights 2.0
Nothing spells old movie computers like a panel of randomly blinking lights, but in fact, these so-called "blinkenlights" can be valuable indicators - especially in embedded systems where the user interface must be minimal, small and cheap. Control of these lights can be achieved using a very simple, real-time interpreted script, and this kind of solution may be extended to other and more complex embedded tasks.
Introduction to Microcontrollers - Beginnings
Welcome to this Introduction to Microcontroller Programming tutorial series. If you are looking to learn the basics of embedded programming for microcontrollers (and a bit of embedded hardware design as well), I hope these tutorials will help you...
Working with Strings in Embedded C++
This article discusses the use of strings in embedded systems. It explains how the need for and use of strings in embedded systems has changed with the advent of cheaper, full graphic displays and the growth of the ‘Internet of Things’ (IoT). The article also covers character literals, C-Strings and string literals, and the difference in memory models between them. It also highlights the safety and security issues that arise from using strings in embedded systems. Finally, it explains how C++11 introduced a Raw string literal type that is useful for storing file paths or regular expressions.
OOKLONE: a cheap RF 433.92MHz OOK frame cloner
Introduction A few weeks ago, I bought a set of cheap wireless outlets and reimplemented the protocol for further inclusion in a domotics platform. I wrote a post about it here: http://www.embeddedrelated.com/showarticle/620.php Following...
Skills For Embedded Systems Software Developers
Contents: Introduction Do I Need To Be An Expert In Everything? How Much Time Do I need? Do I need A College Degree? Why Is The List So Big? Do I Really Need All These Things? The Skills Software Hardware Software Development...
Introduction to Deep Insight Analysis for RTOS Based Applications
Over the past several years, embedded systems have become extremely complex. As systems become more complex, they become harder and more time consuming to debug. It isn’t uncommon for development teams to spend more than 40% development cycle...
Understanding and Preventing Overflow (I Had Too Much to Add Last Night)
Happy Thanksgiving! Maybe the memory of eating too much turkey is fresh in your mind. If so, this would be a good time to talk about overflow. In the world of floating-point arithmetic, overflow is possible but not particularly common. You can...
Ten Little Algorithms, Part 4: Topological Sort
Other articles in this series: Part 1: Russian Peasant Multiplication Part 2: The Single-Pole Low-Pass Filter Part 3: Welford’s Method (And Friends) Today we’re going to take a break from my usual focus on signal processing...
3 Overlooked Embedded Software Elements
Have you ever wondered, while you and your team are busy writing software if the foundation of how embedded software systems are built has changed and left you in the dust? What if while you were busily focusing on getting your product out the...
Review: Modern Software Engineering
This is actually a review of 3 books by Dave Farley, because they really form a set: Modern Software Engineering: Doing What Works to Build Better Software Faster (just released for 2022, 224 pages) Continuous Delivery: Reliable...
VolksEEG: Rust Development On Adafruit nRF52840 Feather Express
Contents: Introduction Setup Hardware Workstation Software Checks USB Device Minicom JLinkExe FTHR840BOOT Contents OpenOCD VolksEEG/eeg-device-firmware PR "Merging initial implementation of the PC communications...
Working With ESP-C3-32S-Kit Dev Board
Introduction The ESP-C3-32S-Kit is a small dev board made by Ai.Thinker, containing an ESP-C3-32S SoC module, supporting WiFi and BLE: Development for the board uses the Espressif IoT Development Framework...
Learning Rust For Embedded Systems
The Motivational PortionBased on recommendations from Kevin Nause, the VolksEEG project is considering using Rust as the embedded system programming language. So I've been off on a tear skimming books and e-books and watching videos at 2x to...
The 2021 IoT Online Conference
The IoT Online Conference is back, and this time the core focus is on IoT embedded systems and edge computing. This post will explore what will be happening at this year’s conference and how teams and developers can benefit. The...
Six Software Design Tools
Introduction Here are six tools to help you with software design. The first two are very simple, almost deceptively trivial, while the last four are more involved. They apply universally, to all types of software, all types of systems, and...
Review: Prototype to Product
Prototype to Product: A Practical Guide for Getting to Market, by Alan Cohen, is a must-read for anyone involved in product development, whether in a technical, management, or executive role. I was reminded of it by Cohen's recent...
Definite Article: Notes on Traceability
Electronic component distibutor Digi-Key recently announced part tracing for surface-mount components purchased in cut-tape form. This is a big deal, and it’s a feature that is a good example of traceability. Some thing or process that has...
Learning From Engineering Failures
IntroductionI'm an informal student of engineering failures. They guide a lot of my attitude and approach towards engineering.This is rooted in two of my favorite quotes:George Santayana: Those who do not remember the past are condemned...
Acceptance Tests vs. TDD
The Question Our software book club at work is reading Michael Feathers' Working Effectively with Legacy Code. This is an outstanding book that's worth re-reading every few years. This week, we went over Chapter 8, "How Do...
Slew Rate Limiters: Nonlinear and Proud of It!
I first learned about slew rate limits when I was in college. Usually the subject comes up when talking about the nonideal behavior of op-amps. In order for the op-amp output to swing up and down quickly, it has to charge up an internal capacitor...
Working With ESP-C3-32S-Kit Dev Board
Introduction The ESP-C3-32S-Kit is a small dev board made by Ai.Thinker, containing an ESP-C3-32S SoC module, supporting WiFi and BLE: Development for the board uses the Espressif IoT Development Framework...
10 Software Tools You Should Know
Unless you're designing small analog electronic circuits, it's pretty hard these days to get things done in embedded systems design without the help of computers. I thought I'd share a list of software tools that help me get my job done. Most of...
OOKLONE: a cheap RF 433.92MHz OOK frame cloner
Introduction A few weeks ago, I bought a set of cheap wireless outlets and reimplemented the protocol for further inclusion in a domotics platform. I wrote a post about it here: http://www.embeddedrelated.com/showarticle/620.php Following...
Donald Knuth Is the Root of All Premature Optimization
This article is about something profound that a brilliant young professor at Stanford wrote nearly 45 years ago, and now we’re all stuck with it. TL;DR The idea, basically, is that even though optimization of computer software to execute...
Basic Sensors for an Autonomous Vehicle
The following are a few basic sensors that can be used to help an autonomous vehicle navigate its environment.The faster the vehicle is traveling, the faster the sensor must be processed. Moving vehicles could knock something over or...
Round Round Get Around: Why Fixed-Point Right-Shifts Are Just Fine
Today’s topic is rounding in embedded systems, or more specifically, why you don’t need to worry about it in many cases.One of the issues faced in computer arithmetic is that exact arithmetic requires an ever-increasing bit length to...
The New Forum is LIVE!
After months of hard word, I am very excited to introduce to you the new forum interface. Here are the key features:1- Easily add images to a post by drag & dropping the images in the editor2- Easily attach files to a...
First Steps in OrCAD 16 [Capture]
Hello community, I know that in last posts I have been writting about the Software. But what about Hardware? In last months I have been dealing with it, exactly with OrCAD 16. And I will explain how to build a PCB in 2 articles. For...
My Love-Hate Relationship with Stack Overflow: Arthur S., Arthur T., and the Soup Nazi
Warning: In the interest of maintaining a coherent stream of consciousness, I’m lowering the setting on my profanity filter for this post. Just wanted to let you know ahead of time. I’ve been a user of Stack Overflow since December of...







