Cortex-M Exception Handling (Part 2)
The first part of this article described the conditions for an exception request to be accepted by a Cortex-M processor, mainly concerning the relationship of its priority with respect to the current execution priority. This...
How to Build a Fixed-Point PI Controller That Just Works: Part I
This two-part article explains five tips to make a fixed-point PI controller work well. I am not going to talk about loop tuning -- there are hundreds of articles and books about that; any control-systems course will go over loop tuning enough to...
Linear Feedback Shift Registers for the Uninitiated, Part XVIII: Primitive Polynomial Generation
Mutex vs. Semaphores – Part 2: The Mutex & Mutual Exclusion Problems
Part 1 of this series we looked at the history of the binary and counting semaphore, and then went on to discuss some of the associated problem areas. In this posting I aim to show how a different RTOS construct, the mutex, may overcome some, if...
Linear Feedback Shift Registers for the Uninitiated, Part VIII: Matrix Methods and State Recovery
Introduction to Microcontrollers - Interrupts
[quicklinks] It's Too Soon To Talk About Interrupts! That, at least, could be one reaction to this chapter. But over the years I've become convinced that new microcontroller programmers should understand interrupts before being...
Digital PLL's -- Part 1
1. Introduction Figure 1.1 is a block diagram of a digital PLL (DPLL). The purpose of the DPLL is to lock the phase of a numerically controlled oscillator (NCO) to a reference signal. The loop includes a phase detector to compute ...
Linear Feedback Shift Registers for the Uninitiated, Part III: Multiplicative Inverse, and Blankinship's Algorithm
Scorchers, Part 3: Bare-Metal Concurrency With Double-Buffering and the Revolving Fireplace
This is a short article about one technique for communicating between asynchronous processes on bare-metal embedded systems. Q: Why did the multithreaded chicken cross the road? A: to To other side. get the — Jason Whittington There...
Hidden Gems from the Embedded Online Conference Archives - Part 3
Jack Ganssle shows us what we can learn by studying previous failures - and why this is essential for anyone working in embedded systems.
Vintage multi-core and “so long”
A personal and historical perspective on multi-core system design.
Working with Microchip PIC 8-bit Interrupts
This fifth and final post of the Getting Started with Microchip PIC 8 Bit Development series looks at interrupts on 8-bit PIC microcontrollers. After a review of basic interrupt functionality, actual implementation is explored through implementation of a four bit counter driven via Timer0 interrupts whose value is displayed through four LEDs on Microchip's Curiosity HPC Development Board.
Hidden Gems from the Embedded Online Conference Archives - Part 2
A look back at a deep dive into the Mars Perseverance flight software from one of the technical leads at JPL.
Hidden Gems from the Embedded Online Conference Archives - Part 1
Discussion of a "hidden gem" from the Embedded Online Conference archives!
Optimizing Hardware Design: Reducing Iterations with DSM
Often, product teams curate feature roadmaps that fail to account for the interdependencies in product components. For this article, I wrote about how system architecture tools like Design(dependency) Structure matrix (DSM) can be used to evaluate feature roadmaps to avoid the purgatory of change propagation and accompanying endless Iteration loops. These iteration loops are sometimes affordable (manageable) in software development (Agile saves lives), but for hardware teams - especially small product teams and startups - the lost time, and money is the stuff of which product graves are made.
3 Tips for Developing Embedded Systems with AI
Explore how to leverage AI in developing embedded systems with three practical tips, learn why documenting your workflows, supercharging testing and debugging, and adopting AI-assisted code generation can save time, reduce errors, and boost performance in your projects, and discover actionable insights to streamline development in resource-constrained environments, this blog explains how to prepare for AI integration while keeping the expertise of experienced engineers intact, offering real-world examples that show how even incremental AI adoption can revolutionize your development process, whether you’re new to AI or seeking to enhance existing practices, these strategies provide a clear roadmap to build smarter, more efficient embedded systems using AI.
Static or static
The keyword static in C and C++ has multiple uses, which are not always well understood.
The Most Annoying Sound
Independent consultants often face requests and requirements that go beyond the technicalities of software and hardware. Designing user interfaces is a common example, and even though most of us are not UI experts, we still have to get it right, otherwise the users may get annoyed, and the product will fail. However, what happens when we're asked explicitly to annoy users? Here's a true story about such a case.
VHDL tutorial - part 2 - Testbench
[quicklinks]In an earlier article I walked through the VHDL coding of a simple design. In this article I will continue the process and create a test bench module to test the earlier design. The Xilinx ISE environment makes it pretty easy to start...
Chebyshev Approximation and How It Can Help You Save Money, Win Friends, and Influence People
Well... maybe that's a stretch. I don't think I can recommend anything to help you win friends. Not my forte. But I am going to try to convince you why you should know about Chebyshev approximation, which is a technique for figuring out how...
Picowoose: The Raspberry Pi Pico-W meets Mongoose
This example application describes the way to adapt the George Robotics CYW43 driver, present in the Pico-SDK, to work with Cesanta's Mongoose. We are then able to use Mongoose internal TCP/IP stack (with TLS 1.3), instead of lwIP (and MbedTLS).
Your Career Archive
Clive Maxfield and Adam Taylor recently published a series of blog posts about how to get and keep an engineering job, discussing preparation in high school through early career stages. I've just started a new job, and wanted to add...
Important Programming Concepts (Even on Embedded Systems) Part I: Idempotence
There are literally hundreds, if not thousands, of subtle concepts that contribute to high quality software design. Many of them are well-known, and can be found in books or the Internet. I’m going to highlight a few of the ones I think...
Breaking AES with an Oscilloscope
AES is a powerful encryption algorithm that protects some our most important secrets. But did you know that many devices are inadvertently leaking the value of their private key through their power pins?! Join me in this special preview of my upcoming workshop at the Embedded Systems Summit (14-16 October 2025 in San Jose, CA) as we explore the world of hardware security and discover just how easy it could be to break AES encryption with only an oscilloscope and some math.
Why Containers Are the Cheat Code for Embedded DevOps
Embedded software teams have long accepted toolchain setup as “part of the job,” but it’s a hidden productivity killer. Manual installs waste days, slow onboarding, and derail CI pipelines with “works on my machine” issues. While enterprise software solved this years ago with containerization, many embedded teams are still stuck replicating fragile environments. Containers offer a proven fix: a portable, reproducible build environment that works identically on laptops and CI servers. No brittle scripts, mismatched versions, or wasted time—just code that builds. IAR has gone further by delivering pre-built, performance-tuned Docker images for Arm, RISC-V, and Renesas architectures, ready for GitHub Actions and CI/CD pipelines. For regulated industries, containers simplify audits and compliance by enabling validation once and reuse everywhere. The result: faster onboarding, consistent builds, and stronger safety assurance. Containers aren’t a luxury—they’re the cheat code embedded teams need to modernize DevOps and compete effectively.
3 Tips for Developing Embedded Systems with AI
Explore how to leverage AI in developing embedded systems with three practical tips, learn why documenting your workflows, supercharging testing and debugging, and adopting AI-assisted code generation can save time, reduce errors, and boost performance in your projects, and discover actionable insights to streamline development in resource-constrained environments, this blog explains how to prepare for AI integration while keeping the expertise of experienced engineers intact, offering real-world examples that show how even incremental AI adoption can revolutionize your development process, whether you’re new to AI or seeking to enhance existing practices, these strategies provide a clear roadmap to build smarter, more efficient embedded systems using AI.
