It's been a few months since the launch of the new forums.  Here are a few thoughts. The thumbsup and beer buttons    If there is one thing that could have a...

I am after some help.A few years ago I built an analogue signal audio filter to provide high frequency, mid range and low frequency for my audio amp. This works...

This is based on some questions I posed (and you all answered) before. Suppose I have declared NUM_SETTINGS to be equal to 3. Let's also assume I've defined FRED...

I'm just trying to get a feel for things here. I'm a hardware design engineer by trade. I'm familiar with the concepts of formal verification with regard to designing...

I've written a custom bootloader using C to run on ARM cortex_M4 but I had a HardFault exception when using the debug mode. This exception appears just in debug...

Hi all, I'm trying to interface the MAXIM MAX30102 with the MSP430FR5739 using I2C protocol. I'm using pull-up resistors (4.7 KOhm) on SDA and SCL lines, using...

Dear All Hello, I am using the MC20XS4200 to control 6 outputs motor and bulb loads. The PCB board contains 3 MC20XS4200, each MC20XS4200 has 2 channels. The MC20XS4200...

As always, I'm really sorry to bug you with a simple question (simple to you, not to me) -- I'll try to make this the last one for a while. I'm using an Arduino...

On the one hand I feel guilty and embarrassed about asking all of my simplistic questions, but I always end up learning so much here.This relates to my previous...

I'm afraid I've reached the limit of what I can wrap my brain around with regards to initializing a union -- any help here will be very gratefully received.As you...