I2C on BasicX Development Station.

Started by jasuk1970 in BasicX10 years ago

Hi, Has anyone been able to implement I2C comms on the BasicX Development station? I'm trying to get an LCD Screen to work with the board...

Hi, Has anyone been able to implement I2C comms on the BasicX Development station? I'm trying to get an LCD Screen to work with the board which uses I2C as its communication. I've tried the I2C code in the files section (And had already written similar myself) But I cannot get anything out of the screen. Cheers, Jason


urgent connection help(please read the following)

Started by naimead in BasicX13 years ago 1 reply

Hi, I am trying to watch some indications on my LCD so I did the following: Connect Vss to Cathode Connect Vdd to...

Hi, I am trying to watch some indications on my LCD so I did the following: Connect Vss to Cathode Connect Vdd to Anode Connect Vo to Vss through a resistor Connect Vss to BasicX pin4 Connect Vdd to BasicX pin21 The problem i


Tutorial Article on using the BX-24 is being published

Started by cloxwerx in BasicX11 years ago 2 replies

A tutorial article I wrote describing how to get started using the BX-24 and other NetMedia devices is appearing in an amateur radio magazine...

A tutorial article I wrote describing how to get started using the BX-24 and other NetMedia devices is appearing in an amateur radio magazine called "CQ Amateur Radio" (March issue). The beginning programs are simple and deal with sending and copying Morse code using the chip. Additional programming is pointed to by the article which deals with reading temperatures, using an LCD display an...


BasicX stuff for free: Christmas came early for me !

Started by benoit_bleau1 in BasicX11 years ago 1 reply

Today, I received a package from UPS, totally unexpected. To my surprise it was stuff from Netmedia. In the box there was: 2 Standard...

Today, I received a package from UPS, totally unexpected. To my surprise it was stuff from Netmedia. In the box there was: 2 Standard servos Cirrus CS-50 1 Parallel LCD, 2 lines by 16 1 LCDX 1 security camera, the guts of it... fun stuff 1 AA battery holder 1 22 Compact Disks rack 2 issues of Servo magazine (dec 2004/jan 2005) And the cherry on top of it all is: 1 Siteplayer 2000...


Serial port questions: queues

Started by arhodes19044 in BasicX12 years ago 10 replies

I have a project interfacing a hand-held GPS unit and displaying data at higher numerical resolution than the GPS unit itself displays, and ...

I have a project interfacing a hand-held GPS unit and displaying data at higher numerical resolution than the GPS unit itself displays, and then doing post-processing on the data. I use Com1 to get data from the GPS unit. I do not need to send ANY data to the unit. Com3 is used exclusively for output to an LCD serial display. I am running


Re: Keypad interface?

Started by query_again in BasicX12 years ago

Anyone has experience in connecting a 20X4 parallel LCD with 3X4 Keypad directly, displaying the depressed key + sending the info...

Anyone has experience in connecting a 20X4 parallel LCD with 3X4 Keypad directly, displaying the depressed key + sending the info BX- 24? thanks in advance --- In basicx@basi..., "Don Kinzer" wrote: > > --- In basicx@basi..., "arhodes19044" wrote: > > I have not tested the limit of the number of potential simultane


Strange message in LCD

Started by naimead in BasicX13 years ago 4 replies

I wrote something as simple as this...: call putqueuestr(ocom3,chr(254) & chr(1)) 'clear the screen delay (1.0) '1.0 second...

I wrote something as simple as this...: call putqueuestr(ocom3,chr(254) & chr(1)) 'clear the screen delay (1.0) '1.0 second delay call putqueuestr(ocom3,chr(254) & chr(128)) 'Command byte sent call putqueuestr(ocom3,"Position & Altitude") 'send lin


How to format data type single for LCDX 4x20 display with two decimal places?

Started by ronoutous in BasicX7 years ago 1 reply

I have been trying to find a way to format data type single data so that when I write it to the LCDX 4x20 LCD, only two decimal places are...

I have been trying to find a way to format data type single data so that when I write it to the LCDX 4x20 LCD, only two decimal places are displayed. One method I've considered is to multiply the value by 10 or 100, then convert to Integer, convert back to single, then divide by 10 or 100 before displaying. This method works for all values except 0.60. When the value is 0.60 this method produces 0...