hi all i want to develop INTRUSION DETECTION SYSTEM based on ARM7 and INTEL SA110.can anyone help me regarding this?what all specific areas i...

hi all i want to develop INTRUSION DETECTION SYSTEM based on ARM7 and INTEL SA110.can anyone help me regarding this?what all specific areas i need to know to implement this application?pls help me,as this is very urgent regards john

Hi all, How can I correct the following error on ARM7 with C programming? '=': implicit cast of pointrt to non-equal pointer thx and...

Hi all, How can I correct the following error on ARM7 with C programming? '=': implicit cast of pointrt to non-equal pointer thx and regards

Dear frends..... I need to do some signal processing and application is as.. I have to record some sound (near about 5...

Dear frends..... I need to do some signal processing and application is as.. I have to record some sound (near about 5 seconds)coming from speakers of TV and then have to do frequency analysis of that data so have to do FFT. So, compulsory I have to use DSP Processors or any low cost solution is there? like can I use ARM7 based microcontroller or CYGNAL-C8051 will do. Help ...

Dear All, We have released eight new low cost ARM7 development boards: SAM7-P64 - $59.95 development board with...

Dear All, We have released eight new low cost ARM7 development boards: SAM7-P64 - $59.95 development board with AT91SAM7S64 http://www.olimex.com/dev/sam7-p64.html STR-P711 - $69.95 development board with STR711FR2T6 at http://www.olimex.com/dev/str-p711.html OKI-H5003 - $119.95 development board with ML67Q5003 at http://www.olimex.com/dev/oki-h5003.html http://www.olimex.com/dev/o...

hi Can someone point me to some C- Programming Tutorials for ARM7 Microcontrollers??? regards Krish

hi Can someone point me to some C- Programming Tutorials for ARM7 Microcontrollers??? regards Krish

I'm starting a new project with ARM7 core processors and I need to evaluate these toolchains (with associated enviroment). Is the GNUARM...

I'm starting a new project with ARM7 core processors and I need to evaluate these toolchains (with associated enviroment). Is the GNUARM toolchain (debugger) good and reliable, or do I need to buy some proprietary product? I'm looking for some advices, info and experiences about those. Thanks a lot.

Hello! I just wanted to know if it is possible to access e.g. 16Mbyte SDRAM with an LPC2214 with an ARM7TDMI core? I think the necessary pins...

Hello! I just wanted to know if it is possible to access e.g. 16Mbyte SDRAM with an LPC2214 with an ARM7TDMI core? I think the necessary pins are all lined out. How to connect the RAM chip to the controller? I need this RAM for running ucLinux on it. Thanks a lot for the answers, Karl

Hi all, I'm designing a system based around a Sharp 79524 ARM7 part which will be required to be occasionally reprogrammed in the field with...

Hi all, I'm designing a system based around a Sharp 79524 ARM7 part which will be required to be occasionally reprogrammed in the field with around 16MB of data from a PC. I've been looking into various methods to achieve this an I was wondering whether the collective have any thoughts? I am not constrained on power consumption or space and it doesn't have to be lightning fast. Howeve...

IAR seems to be purely focused on C complier. I would like to do some small amouts of code to get an understanding of the ARM7 and Cortex M3...

IAR seems to be purely focused on C complier. I would like to do some small amouts of code to get an understanding of the ARM7 and Cortex M3 instruction set. Does any one know where I might get some IAR ASM code examples from? THanks in advance Joe

Is it true, as I understand from wikipedia, that only the implementation of long filename support is commercially restricted when using...

Is it true, as I understand from wikipedia, that only the implementation of long filename support is commercially restricted when using FAT16? We would like to add a compact flash card interface to an ARM7 product we have. It would be nice if the card used a format that we could easily read on a PC.

Hello group, I have been tasked with investigating possible solutions for a new product. I have normally used micros with flash/ram memory...

Hello group, I have been tasked with investigating possible solutions for a new product. I have normally used micros with flash/ram memory onboard, but now we need to have atleast 1MB codememory and the same amount of RAM, so I have been looking for a while to find some possible setup. It appears to me that singlechip MCU's are much more popular (naturally), but I would like to ask all of ...

Hi all, is there anybody who is using XINU as an embedded operating system for real design? Has anybody ported it to ARM7 or even...

Hi all, is there anybody who is using XINU as an embedded operating system for real design? Has anybody ported it to ARM7 or even Cortex-M3 microcontroller? I have found only this project http://xinu.mscs.mu.edu with MIPS port of XINU. Best regards Vita

Hi All - Can anybody provide any comments on the C++ support in the Keil compiler (ARM7 target) ? Specifically: - completeness (though...

Hi All - Can anybody provide any comments on the C++ support in the Keil compiler (ARM7 target) ? Specifically: - completeness (though libstdc++ is not interesting for us) - robustness Thanks in advance, Best Regards, Dave PS: email me off-group if you like...

Hi there Looking at several processors at the moment but ARM7 and Coldfire in particular. I like the popularity of ARM and associated tools,...

Hi there Looking at several processors at the moment but ARM7 and Coldfire in particular. I like the popularity of ARM and associated tools, but cant get over the fact that the interrupt structure within them (only two priority levels) is pants. Coldfire has 7 or 8 nestable levels. I would appreciate anyones view on this. Cheers Andrew

Dear Friends, I am very new to ARM family and right now working with lpc2214 and lpc2148 and EP9302 from cirrus logic. I can do basic...

Dear Friends, I am very new to ARM family and right now working with lpc2214 and lpc2148 and EP9302 from cirrus logic. I can do basic implementation and interfaces with them as I worked with 8051 long time. Now I want to do something with real time OS. I want to load Windows CE on ARM. I have never did this kind of work. So, can anybody tell me from where to start and from where I can get...

Hello group, For a new project, we have almost decided on AT91SAM7X256 for a variety of reasons. Primarily due to its rich peripheral set and...

Hello group, For a new project, we have almost decided on AT91SAM7X256 for a variety of reasons. Primarily due to its rich peripheral set and previuos knowledge of Atmel Chips. But we need to implement a LCD display, preferably 320x240 pixels into our system and we would like some advice on the best way to do this. With respect to both hardware and software development. I.e how to get a ...

I will to learn from u and I wish to impress a friend with 3 of her pics ...rotating in color LCD at ARM7 board like Leon. because I have...

I will to learn from u and I wish to impress a friend with 3 of her pics ...rotating in color LCD at ARM7 board like Leon. because I have been thinking of her since I met her. can u help me with some circuit diagram and programming? I got the OPTREX DMF 50081 now. I have been searching google to find driver. TIA.

Hello again, We've decided to use the Atmel AT91SAM9260 for our project. The chip is probably a bit more powerful than we currently need, but...

Hello again, We've decided to use the Atmel AT91SAM9260 for our project. The chip is probably a bit more powerful than we currently need, but it's always nice to have room for future enhancements, and it's slightly more expensive than most of the ARM7 and Coldfire chips we were looking at. While waiting for my development kit, I'm trying to figure out what development tools and RTOS to u...

I've never used ARM microprocessors, so i have questions about. For now, i have only used 8 bit micropoccessors and i have programmed only in C...

I've never used ARM microprocessors, so i have questions about. For now, i have only used 8 bit micropoccessors and i have programmed only in C and asm language (i'm not expert in object oriented programming). I shoud use an ARM7 microprocessor. 1)What is the best ide for software development?Any site, reference , comparative table, suggestion? 2)Any book about this micro? I'm totally new, ...

Forgive me if this is a noob question, but this is my first chip bringup from scratch. I'm trying to bring up an ARM7 (ADuC7021), and am having...

Forgive me if this is a noob question, but this is my first chip bringup from scratch. I'm trying to bring up an ARM7 (ADuC7021), and am having a problem with the endianness of data, and I'm not sure how to fix it. My problem is this: if I call an internal function SD_OutputString("Bootloader.."), I get the following output on my serial port: "tooBdaol..re". In other words, it seems to...