ioremap() and port of linux to MPC7400 based SBC (VME board)

Started by him in comp.arch.embedded14 years ago 2 replies

I have run into a problem I am having a hard time figuring out. I have an MPC7400 SBC (PCI bus based) that has a device X residing at the...

I have run into a problem I am having a hard time figuring out. I have an MPC7400 SBC (PCI bus based) that has a device X residing at the following locations in memory: 0x1860 0000 - 0x186f ffff device control register space 0xb000 0000 - 0xbfff ffff device memory space Now assume for a moment that NOTHING special needs to be done to access either space once the system has booted and b...


low cost SBC for building Internet modem/router

Started by bsder in comp.arch.embedded14 years ago 4 replies

Hi, I am looking for a low cost SBC for building an Internet modem / router with my own customized FreeBSD OS. The requirement is very...

Hi, I am looking for a low cost SBC for building an Internet modem / router with my own customized FreeBSD OS. The requirement is very simple as: * Intel? Low Voltage Celeron? Low Voltage Celeron? 400MHz * 256MB on board memory * 2 or 3x 10/100 Mbps Ethernet * 1x RS232C * Compact Flash socket on board or DiskOnChip on board. As I dont' need all other fancy...


Need Linux SBC with 4 Uarts

Started by Sagaert Johan in comp.arch.embedded13 years ago 3 replies

Hi Are there any boards around running embedded linux having 4 serial ports and ethernet ? Johan

Hi Are there any boards around running embedded linux having 4 serial ports and ethernet ? Johan


TFT display burnin

Started by Sagaert Johan in comp.arch.embedded11 years ago 1 reply
SBC

Am i right that a TFT can burn-in if the display refresh signals are disabled for prolonged time? I noticed this on an SBC Johan

Am i right that a TFT can burn-in if the display refresh signals are disabled for prolonged time? I noticed this on an SBC Johan


Serching for a ccfl inverter

Started by Dav79 in comp.arch.embedded11 years ago 3 replies

Hello, I have an SBC powered by 5V DC with an LCD TFT with 2 CCFL lamps. so I'm searching for an inverter suitable for these. I need also...

Hello, I have an SBC powered by 5V DC with an LCD TFT with 2 CCFL lamps. so I'm searching for an inverter suitable for these. I need also some know-how on connecting inverters to power and so on. thanks


Need cPCI SBC reccomendation.

Started by CW Thomas in comp.arch.embedded14 years ago 3 replies

Hi; Thanks for reading this. I am looking for a cPCI controller that will run win2K or XP. It has to have an operating temperature range...

Hi; Thanks for reading this. I am looking for a cPCI controller that will run win2K or XP. It has to have an operating temperature range of from -20C to 85C( this is a mandatory requirement). Also Needs a V(io) of 3.3 volts and I would like to be able to use a FLASH drive due to the temp extremes. Does anybody know of anyone who makes a product that might work for us? Thanks...


Using LCD panel

Started by atilla in comp.arch.embedded10 years ago 9 replies

I found an ancient piece of hardware. An old notebook with a 10" 800x600 LCD. Is it hard to drive a notebook LCD with some SBC or FPGA? Are...

I found an ancient piece of hardware. An old notebook with a 10" 800x600 LCD. Is it hard to drive a notebook LCD with some SBC or FPGA? Are there standards for this? Atilla


SBC w/ SDIO slot?

Started by Lorraine in comp.arch.embedded13 years ago 5 replies
SBC

My question seems a bit off topic for this group but I couldn't find anything that's more closely related Are there any manfacturers out there...

My question seems a bit off topic for this group but I couldn't find anything that's more closely related Are there any manfacturers out there that makes single board computers with SDIO slot? I don't want to have to bother with custom designs. Thanks!


how to chose the best embedded board?

Started by EmbeddedLotus in comp.arch.embedded10 years ago 7 replies
SBC

Hi I'm looking for a so-called embedded board to use in vehicle(bus. I'm confused about bunch of keywords: SBC, Car PC, embedded...

Hi I'm looking for a so-called embedded board to use in vehicle(bus. I'm confused about bunch of keywords: SBC, Car PC, embedded motherboard, computer on module ,.... which keyword should i use and how can i find the best manufacturer of these boards? Best


LVDS 18 bit

Started by eladazaria in comp.arch.embedded9 years ago 1 reply

Hi, I have an SBC which transmits 24-bit LVDS. Can i connect to it an 18 bit LCD ? Should i ignore the last bit? Thanks, Elad ...

Hi, I have an SBC which transmits 24-bit LVDS. Can i connect to it an 18 bit LCD ? Should i ignore the last bit? Thanks, Elad --------------------------------------- Posted through http://www.EmbeddedRelated.com


PC104 plus

Started by kkrish in comp.arch.embedded9 years ago 2 replies

Hi all, Any recommendations for a PC104 plus SBC with good processing speed and withstand high temperature? I am worried about the PCI...

Hi all, Any recommendations for a PC104 plus SBC with good processing speed and withstand high temperature? I am worried about the PCI connectors. In some of the boards the OCI connectors become loose and the daughter boards come out some days. Thanks in advance. Krishna.


Looking for DevKit

Started by in comp.arch.embedded10 years ago

Hello guys, I just bought an Arcom SBC-GXm motherboard on eBay. The problem is that Arcom does not exist anymore and that this motherboard has...

Hello guys, I just bought an Arcom SBC-GXm motherboard on eBay. The problem is that Arcom does not exist anymore and that this motherboard has reached its end of life. I have just been able to get the user manual from Eurotech. Now, I'm looking for a copy of the delivered CD-Rom I did not get, and for one of the development kits CDRom if possible. This way, I will be able to write someth...


Intrinsically safe single board computer?

Started by rblake in comp.arch.embedded12 years ago
SBC

Hi all, Can anyone recommend an embedded SBC or PLC like product that can be placed in a class 1, div 1, group B environment? We need 3-5...

Hi all, Can anyone recommend an embedded SBC or PLC like product that can be placed in a class 1, div 1, group B environment? We need 3-5 channels 12 bit or better A/D, 1 D/A, and few digital I/O pins, plus either a network or serial port. I don't have a good handle on the speed, but there will be a fair amount of floating point math. The program itself is small, but there will likely be a ...


ARM SBC in arduino form factor?

Started by Roberto Waltman in comp.arch.embedded8 years ago 11 replies

For a couple of one of a kind projects, I would like to use an ARM controller in a board that could accept (at least some of the)...

For a couple of one of a kind projects, I would like to use an ARM controller in a board that could accept (at least some of the) Arduino shields. So far I found the Xduino (status dubious) and the Cortino ( http://www.bugblat.com/products/cor.html ) Can anybody point to others? Thanks, -- Roberto Waltman


Using TS-7200 to build a router?

Started by Kira in comp.arch.embedded11 years ago 1 reply

Hi, I was wondering if it is feasible to use a TS-7200 SBC to build a router with wireless capabilities ?

Hi, I was wondering if it is feasible to use a TS-7200 SBC to build a router with wireless capabilities ?


SBC board with built in WiFi?

Started by David K in comp.arch.embedded14 years ago 4 replies

I just started a project and I've been spending the last few days searching for an appropriate PC/104 Single Board Computer. I was hopeing to...

I just started a project and I've been spending the last few days searching for an appropriate PC/104 Single Board Computer. I was hopeing to find one with built-in WiFi capability (versus a PCMCIA WiFi card + Drivers) but as of yet, I've had no luck. Does anyone know off-hand of such a product?


Extra SBC processor for industrial PC System

Started by Dave Moore in comp.arch.embedded13 years ago 6 replies

Hi All, I'm putting together an Industrial PC-based system consisting of a standard ATX PC motherboard and processor. However, because of...

Hi All, I'm putting together an Industrial PC-based system consisting of a standard ATX PC motherboard and processor. However, because of the nature of the application that I'm looking at I will need to put more processing into the box. The questions is, what's the best way to do this?. Ideally, I want the additional processor run a non-RTOS like XP, but I also need a good Bandwidth li...


help me get started with Embedded devices using Am29C020 chip on an SBC

Started by heirbrande in comp.arch.embedded15 years ago 2 replies

Hi, I would like some places to start to get the easiest program programmed into an AM29C020 EEprom to boot a single board computer. I...

Hi, I would like some places to start to get the easiest program programmed into an AM29C020 EEprom to boot a single board computer. I imagine seeing DOS or Linux booting up to say "Hello, World". First I just want to see this thing boot to something else instead of the WinCE that it boots to. After that I can try to figure out how to program them myself with some other programs. ...


Intel Atom: pros/cons/hazzards?

Started by Don Y in comp.arch.embedded5 years ago 229 replies
SBC

Hi, I've rescued a couple of Atom-based SBC's. Essentially diskless workstations. Am I correct in assuming these are just...

Hi, I've rescued a couple of Atom-based SBC's. Essentially diskless workstations. Am I correct in assuming these are just "yet-another-x86"? Are there any downsides/upsides/problems to watch for when porting desktop OS's/apps to these sorts of boards? Or, just treat it like any other x86 (686?) for all practical purposes? Should I accept *more* of them? (within reason) Or, are ...


cheapest board able to run linux

Started by Damiano in comp.arch.embedded14 years ago 6 replies

Hallo I'm looking for a cheap sbc available in quantity for an embedded project. I'm looking for something able to run at least uclinux or...

Hallo I'm looking for a cheap sbc available in quantity for an embedded project. I'm looking for something able to run at least uclinux or ecos. I had a look but i did not find anything far from $99. I'dlike something around 20 max 30$, around 100$ I already have boards able to run an embedded bsd system, but it is too expensive for the current project. Any idea? Thx in advance. D...