Iam designing a system consisting of: Microblaze Core RS232 Uart Lite SPI controller The SPI controller will communicate with an ADC...

Iam designing a system consisting of: Microblaze Core RS232 Uart Lite SPI controller The SPI controller will communicate with an ADC converter placed outside of FPGA. In order to modelize the system, previous to implement it, I have included an VHDL model of the converter. I don=B4t know what is the best way to simulate the system whole.. ModelSim is a harware simulator and I think t...

Hi, I am implementing firewire interface with MPC8347 Microcontroller using VxWorks RTOS. I am using TI's TSB43AB23 firewire OHCI link/PHY...

Hi, I am implementing firewire interface with MPC8347 Microcontroller using VxWorks RTOS. I am using TI's TSB43AB23 firewire OHCI link/PHY layer controller which is connected to MPC8347 using PCI Interface. Both TSB43Ab23 and MPC8347 are configured as PCI master and only these 2 devices are present on PCI bus. When I connect a Firewire Simulator/Analyzer to TSB43Ab23 I am able to receive SelfI...

Tasking has introduced v8.5 of their C166/ST10 C compiler. The CrossView Pro debugger instruction set simulator now supports full peripheral...

Tasking has introduced v8.5 of their C166/ST10 C compiler. The CrossView Pro debugger instruction set simulator now supports full peripheral simulation http://microcontroller.com/news/tasking_C166_85.asp - Bill Giovino Executive Editor http://Microcontroller.com

Hello, I would like to bring to your attention a website for simulators. http://www.simulators.org.uk is a website which lists simulators...

Hello, I would like to bring to your attention a website for simulators. http://www.simulators.org.uk is a website which lists simulators across the globe including flight sims, maritime sims, and medical sims etc.... If you find that there is a simulator which you worked on or trained on which is not listed please do not hesitate to get in touch with us. mailto:pete@simulators.org.uk ...

Ada-Europe's first Annual Student Programming Contest "The Ada Way" is now accepting submissions. Last September, Ada-Europe[1] kicked off its...

Ada-Europe's first Annual Student Programming Contest "The Ada Way" is now accepting submissions. Last September, Ada-Europe[1] kicked off its annual student programming contest "The Ada Way"[2]. The challenge for the 2010-2011 competition was to build a software simulator of a football match. The submission of entries has now been opened: they will be accepted through May 15th. The su...

Hi, I am attempting to use the AVR Studio IDE to implement a simple program for ATtiny2313, utilizing both the 8-bit timer0 and the 16-bit...

Hi, I am attempting to use the AVR Studio IDE to implement a simple program for ATtiny2313, utilizing both the 8-bit timer0 and the 16-bit timer1. I am using the latest version of AVR Studio (4.11.401). Unfortunately, I have discovered that the output compare interrupt for timer1 is not handled correctly by the simulator. Here is what I did: * Create a new project under AVR Studio, an...

------------------ INTEGRITY RTOS Green Hills C++ Compiler PowerPC embedded system ------------------ INTEGRITY RTOS contains default...

------------------ INTEGRITY RTOS Green Hills C++ Compiler PowerPC embedded system ------------------ INTEGRITY RTOS contains default linker directives files for various BSPs and Simulator isimppc. Those files are used to build an INTEGRITY applications. There are three sorts of linker directives files: * for Dynamic Downloadable applications (virtual AddressSpaces) , default linker dir...

i have used following comand with modelsim simulator vsim -multisource_delay max...

i have used following comand with modelsim simulator vsim -multisource_delay max -sdfmax /tb_top/dut_top=/home/projects/user/top_cmax_wc.usdfs.sdf -sdfnoerror work.tb_top i am getting following errors # ** Warning: (vsim-SDF-3262) sdfmax /tb_top/dut_top(90022): Failed to find matching specify timing constraint. # ** Warning: (vsim-SDF-3924) sdfmax /tb_top/dut_top: Out of 41689 SDF statemen...

Hello Friends, I am working on tornado 2.0 on windows I want to know ........ Does vxWorks support any graphic libraries ? Is there any option...

Hello Friends, I am working on tornado 2.0 on windows I want to know ........ Does vxWorks support any graphic libraries ? Is there any option that we can take the windows graphic support on vxWorks? I want ot create a window on vxworks from where i can create the window? How to make my own simulator of vxworks for windows? Please help me out.......... Thanks Meenal