STE2002 LCD controler

Started by gerrit_faas in LPC200015 years ago
LCD

Hi all, I have a LCD(128x64) & STE2002 controler on my desk. Is there someone that has some code / driver for this controler. Is...

Hi all, I have a LCD(128x64) & STE2002 controler on my desk. Is there someone that has some code / driver for this controler. Is this controlere a replacement of a more common controler any help is welcome. Gerrit


Olimex LPC-2138-MT LCD Connection Design Flaw

Started by kennytrussell in LPC200014 years ago 2 replies

I have spent a couple of days troubleshooting a RESET issue that turned out to be a problem with the board. In case it will help someone else,...

I have spent a couple of days troubleshooting a RESET issue that turned out to be a problem with the board. In case it will help someone else, I will explain: I was using P1.16 and P1.25 as outputs from the Extension Port on the board. I was writing little snippets of code and testing. I had my program initializing the LCD but not sending anything to it. I noticed that every other res...


OT: Looking for TFT-LCD panel

Started by drproton2003 in LPC200010 years ago

Hello everyone, We had been using a 2.8" OLED panel in one of our products. Now that panel has been discontinued and of course we didn't get...

Hello everyone, We had been using a 2.8" OLED panel in one of our products. Now that panel has been discontinued and of course we didn't get the notice until a couple weeks after the deadline for the last order. So now I'm looking for a suitable TFT-LCD replacement and thought I'd ask here. This is what we require: 240x320 resolution (portrait mode) touch screen sunlight readable ~2.8"...


missing header file

Started by zyder_x in LPC200013 years ago

I have a lab that I need to complete. It requires to interface with a LCD.Anyway I was trying to run a OLIMEX example code to interface with...

I have a lab that I need to complete. It requires to interface with a LCD.Anyway I was trying to run a OLIMEX example code to interface with the LCD. My problem is that the code won't compile without the "iolpc210x.h". I searched the folders in the Keil ARM directory and it's not there. I searched for it in this group but I could not find it. Can someone help me?


New LPC w/ LCD Controller

Started by Bisser Gatchev in LPC200013 years ago 2 replies

Hi guys, Check out http://www.standardics.nxp.com/products/lpc2000/lpc24xx/~LPC2478/ for the new LPC2470/2478 with built-in LCD...

Hi guys, Check out http://www.standardics.nxp.com/products/lpc2000/lpc24xx/~LPC2478/ for the new LPC2470/2478 with built-in LCD controller. I can only hope that next they add a touch-screen interface to the ADC :) Best Regards Bisser --------------------------------- TV dinner still cooling? Check out "Tonight's Picks" on Yahoo! TV.


Re: [Help Requested] Building a Simple plataform with LCD Touchscreen- going to be uploaded the orcad files in the end

Started by Vladimir Ljaschko in LPC200011 years ago 3 replies

Hi, Mr. Felipe de Andrade Neves Lavratti, Yes, you need external RAM using LCD with such driver. Regards Vladimir ----- Original...

Hi, Mr. Felipe de Andrade Neves Lavratti, Yes, you need external RAM using LCD with such driver. Regards Vladimir ----- Original Message ----- From: Felipe de Andrade Neves Lavratti To: l...@yahoogroups.com Sent: Tuesday, June 23, 2009 3:27 AM Subject: [lpc2000] [Help Requested] Building a Simple plataform with LCD Touchscreen- going to be uploaded the orcad files in the ...


LCD programming with RAM access

Started by supriya albal in LPC200010 years ago 6 replies
LCD

Is any one aware of LCD programming using RAM accesses? What are the RAM addresses available for user?

Is any one aware of LCD programming using RAM accesses? What are the RAM addresses available for user?


hi, why can not read device signature (lpc 2364)

Started by myn0601 in LPC200013 years ago 1 reply

hi, good afternoon, everybody, I am using LPC2364, SSD1926 and the Touch screen LCD together to show something on the LCD, but now the...

hi, good afternoon, everybody, I am using LPC2364, SSD1926 and the Touch screen LCD together to show something on the LCD, but now the LPC2364 and SSD1926 all do not have short circuit any more, the 3 power supplier levels 5v , 3.3v , 1.8 v all there stable. the MCU is connected to PC through UART0, max232 also powered correctly, this part of circuitry refer to the MCB2300 evaluati...


LCD interface HELP

Started by aartis_434 in LPC200014 years ago 7 replies

Hi all.. I have connected LMB202ECC to MCB2100 board... the connnections are on port 0 PORT 0 used as GPIO-- so all the bits 0 to...

Hi all.. I have connected LMB202ECC to MCB2100 board... the connnections are on port 0 PORT 0 used as GPIO-- so all the bits 0 to 15 are set to 00 config PIN on LCD correspoonding pin on board 1 Backlight positive PS 2 Backlight negative PS 3 Vss 4 Vdd 5 V0 6 RS P0.5 7 R/W ...


Interfacing to Ultra chip UC1601s dot matrix LCD driver

Started by ajellisuk in LPC200012 years ago

Hi, I have a project where I'm interfacing an LPC2148 to an LCD with an Ultrachip UC1601s driver. I'm having trouble getting the project up...

Hi, I have a project where I'm interfacing an LPC2148 to an LCD with an Ultrachip UC1601s driver. I'm having trouble getting the project up and running and was wondering whether someone could point me in the direction where I could find some example code. Thanks in advance Andrew ------------------------------------


Developing on the LPC2478

Started by ostehaps01 in LPC200012 years ago 4 replies

Hi I'm about to start develop a new system using the brand new LPC2478 (LPC2468 with a LCD controller) I have a dev board from Embedded...

Hi I'm about to start develop a new system using the brand new LPC2478 (LPC2468 with a LCD controller) I have a dev board from Embedded Artist So before I use $$$ on development tool, j-tag etc. I just whant to ask some Q here. My needs are as following: - Good supply of samples for the interfaces (USB Host, Ethernet, UART, SPI, LCD etc) Prefered is that the development tool c...


"__enable_interrupt" kills IAP

Started by ajellisuk in LPC200011 years ago 2 replies

Hi, In my application I have a secondary bootloader which works ok. When My bootloader is copying a new version of the firmware to the processors...

Hi, In my application I have a secondary bootloader which works ok. When My bootloader is copying a new version of the firmware to the processors internal flash memory I would like to flash an icon on my LCD to indicate that an upgrades is taking place. So I have setup Timer 0 for this purpose hence my preivous post. I have got a routine set up which flashes the LCD icon as I would like, however ...


TFT LCD display (Nokia6600 type) driver

Started by sudip nag in LPC200015 years ago 1 reply
LCD

Hi Everyone in the group, Do anyone has worked on Nokia 6600 type LCD (176x208; 64K color). I need to know the controller inside and...

Hi Everyone in the group, Do anyone has worked on Nokia 6600 type LCD (176x208; 64K color). I need to know the controller inside and the connector pin configuration in order to start working with it. Sudip Nag --------------------------------- Check out Yahoo! India Rakhi Special for Rakhi shopping, contests and lots more.


Graphic LCD

Started by Mukund Deshmukh in LPC200014 years ago 19 replies

Hi, Finally I have ported a graphic LCD 128X64 (can be modified for other sizes also) driver from C51 to LPC21XX. This is for KS107/108 chip...

Hi, Finally I have ported a graphic LCD 128X64 (can be modified for other sizes also) driver from C51 to LPC21XX. This is for KS107/108 chip set and compiles under GCC 4.0.0 Any one interested in code? If there are enough takers, I will put it on yahoo file section. Best Regards, Mukund Deshmukh. Beta Computronics Pvt Ltd 10/1, IT Park, Parsodi, Nagpur-440022 Cell - 9422113746 ...


urgent : need help for ads7825

Started by shweta in LPC200010 years ago 14 replies

hi i am doing project of interfacing ads7825 with lpc2148 In that digital data coming from ads7825 is display onto LCD. but no data is display...

hi i am doing project of interfacing ads7825 with lpc2148 In that digital data coming from ads7825 is display onto LCD. but no data is display onto LCD. i also put my code ads7825.rar so help me thanks in advance ------------------------------------


Re: LPC2131 SPI problem

Started by Jan Szymanski in LPC200015 years ago

--- In lpc2000@lpc2..., "drb5599" wrote: > Hello All, > I have been using the SPI interface on a LPC2131 with good success so > far....

--- In lpc2000@lpc2..., "drb5599" wrote: > Hello All, > I have been using the SPI interface on a LPC2131 with good success so > far. Now, I am trying to interface an LCD controller (HT1621) and > found a strange issue. The LCD must have it's data written 12 bits > at > a time. So I configured the SP


Re: LPC2131 SPI problem

Started by Jan Szymanski in LPC200015 years ago

--- In lpc2000@lpc2..., "drb5599" wrote: > Hello All, > I have been using the SPI interface on a LPC2131 with good success so > far....

--- In lpc2000@lpc2..., "drb5599" wrote: > Hello All, > I have been using the SPI interface on a LPC2131 with good success so > far. Now, I am trying to interface an LCD controller (HT1621) and > found a strange issue. The LCD must have it\'s data written 12 bits > at > a time. So I configured the S


ARM7 with LCD controller

Started by mpavlin969 in LPC200013 years ago

Hello! What are other options beside LPC247x or LH7/LH9. I need low(er) power consumption, SPI, RTC, 2xUART, 2xEXT int., power down with RTC...

Hello! What are other options beside LPC247x or LH7/LH9. I need low(er) power consumption, SPI, RTC, 2xUART, 2xEXT int., power down with RTC wakeup and TFT LCD controller. Touch ADC is a +. Thanks! Marko PS: is there a LH7 group or will they be covered here, since it now an NXP device?


COG LCD on I2C !

Started by omkar vyas in LPC200014 years ago

can any on help for inter facing of chip on glass LCD graphical display to LPC2104 with I2C protocol ? ...

can any on help for inter facing of chip on glass LCD graphical display to LPC2104 with I2C protocol ? __________________________________________________ ------------------------ Yahoo! Groups Sponsor --------------------~--> Protect your PC from spy ware with award winning anti spy technology. It's free. http://us.click.yahoo.com/97bhrC/LGxNAA/yQLSAA/dN_tlB/TM ----------------------


Color LCD (OT)

Started by Richard in LPC200013 years ago 9 replies
LCD

I am looking into the feasibility of adding a large color LCD to a project, or perhaps monochrome.The variety of displays with and without...

I am looking into the feasibility of adding a large color LCD to a project, or perhaps monochrome.The variety of displays with and without controllers is a tad overwhelming. I am thinking of a color display about 5" on the long side. Can anyone recommend a display with a controller or both the display and external controller? I am interested in hearing about the difficulties in implement...