frame buffer application using lpc 2468

Started by Natarajan N in LPC200010 years ago 1 reply

It is possible that some one would have successfully developed famebuffer driver using lpc 24x8. is it absoluely necessary to use lpc 24XX for...

It is possible that some one would have successfully developed famebuffer driver using lpc 24x8. is it absoluely necessary to use lpc 24XX for making a frame buffer device ? can that be accomplished using any other devices ... is RAM is limiting factor or anything else? thanks natarajan ----- Original Message ---- From: phacord To: l...@yahoogroups.com Sent: Monday,


lpc programmer

Started by ekraft_automation in LPC200011 years ago 2 replies

we r tried to programme the lpc 2138 ( can use nay other lpc) but unable to do. we need a help for a simple programme of spi,data storage in...

we r tried to programme the lpc 2138 ( can use nay other lpc) but unable to do. we need a help for a simple programme of spi,data storage in memory, ldisplay on lcd,key operation for inc dec set value and make o/p on off according to data in and set value. regards, electronic kraft


Someone already read out LPC booter ?

Started by Anonymous in LPC200014 years ago

Hello, has someone already dumped the booter of the LPC ? With the ISP utility i think you can't read it out, but i think i...

Hello, has someone already dumped the booter of the LPC ? With the ISP utility i think you can't read it out, but i think i read somewhere that you can get it via JTAG ? BTW: My LPC's has booter version 1.3, any newer / older ones ? Greetings,


AES or other encryption speed on LPC?

Started by Brett Delmage in LPC200013 years ago

Sorry, this is not an LPC-specific question, but Does anyone have any experience with AES encryption on LPC and order of ...

Sorry, this is not an LPC-specific question, but Does anyone have any experience with AES encryption on LPC and order of magnitude speed? I have been looking around the net and am about to try compiling some code to benchmark. Other figures I have seen, fo


LPC 2468 OEM board

Started by Bui Quoc Bao in LPC200010 years ago 1 reply

Hi all, Could any one share me the user manual and the demo software of the Embedded Artist LPC 2468 board? I am designing a board using LPC...

Hi all, Could any one share me the user manual and the demo software of the Embedded Artist LPC 2468 board? I am designing a board using LPC 2468, and I need it as a reference. ------------------------------------


LPC project

Started by jk jlkj in LPC200012 years ago 4 replies

Hi Friends, I have a small project where i use the LPC 2214 . The project consists of communicating with another micro using SPI for...

Hi Friends, I have a small project where i use the LPC 2214 . The project consists of communicating with another micro using SPI for the ADC data, I2c communication for data tranfer between the LPC and a Display IC and a EEPROM. It also provides a lot of man machine interface functions using the keyboard. I have presently used a timer as a scheduler and have defined various ti...


LPC part ID weirdness?

Started by DECwiz \Fred van Kempen\ in LPC200013 years ago

Hi all ! I am testing a board for a company, and ran into something really weird. The board is using an LPC-2292 device. My...

Hi all ! I am testing a board for a company, and ran into something really weird. The board is using an LPC-2292 device. My software uses IAP to determine the LPC Part ID, and, based on that, sets certain values and flags, the most important ones being flash/sram size, and whether or not the device (and, thus, the system) supports the EMC or n


Does IAR support LPC-Link

Started by janek_szymanski in LPC20008 years ago 1 reply

Hi, Does anyone know if possible to use LPC-Link (part of LPCXpresso) with IAR EW? With IAR EW IDE when selecting Debugger options there is...

Hi, Does anyone know if possible to use LPC-Link (part of LPCXpresso) with IAR EW? With IAR EW IDE when selecting Debugger options there is Third-Party Driver listed. What would be the driver for LPC-Link? I have an LPC1343 board working with LPCXpresso IDE using LPC-Link and would like to use the same hardware tool with IAR EW IDE. Thanks Jan ------------------------------------


lpc 2368 Compiler

Started by ozcanozay in LPC200011 years ago 1 reply

Hi, We intend to develop our new project with lpc 2368 and we need a Compiler. I need an information about what is the best compiler for lpc...

Hi, We intend to develop our new project with lpc 2368 and we need a Compiler. I need an information about what is the best compiler for lpc 2368 and how can we purchase it ? Best Regards, Hello from Turkey, Ozcan OZAY


LPC Link as OpenOCD

Started by Jeckson Sb in LPC20007 years ago 10 replies

Hai All I'm newbie in LPC. Someone have info about used LPC link as OpenOCD? Jeckson

Hai All I'm newbie in LPC. Someone have info about used LPC link as OpenOCD? Jeckson


LPC-H40 pcb

Started by eduardo_de_mier in LPC200014 years ago 6 replies

I need a couple of boards compatible to the Olimex LPC-H40. My customer has access to free LPC samples from Philips. However...

I need a couple of boards compatible to the Olimex LPC-H40. My customer has access to free LPC samples from Philips. However Tsvetan told me that he would not sell the blank pcbs. On the other hand David Willmore posted that he would like a version with low diameter pins that fit


Re: LPC2378 DEVELOPMENT KIT PCB LAYOUT

Started by Natarajan N in LPC200010 years ago

Hello I have made a board for LPC 2148, Planning one for 2103 and LPC 2378 is next. Do I get LPC 2103, 2144, 2146, 2148 at...

Hello I have made a board for LPC 2148, Planning one for 2103 and LPC 2378 is next. Do I get LPC 2103, 2144, 2146, 2148 at reasonable price from Texonic? I have a coridum Armmite LPC 2103 based. That is all NATARAJAN texsonics wrote: Dear sir, I am Dharmar from Texsonics, I need a LPC2378 development kit pcb layout.


Query (UART inerfacing with LPC21xx)

Started by Anonymous in LPC200012 years ago 1 reply

Hello Sir, I am new to this technical group. I am workingon Philips ARM (LPC family) controllers. I was interfacing ST16C554D UART (a...

Hello Sir, I am new to this technical group. I am workingon Philips ARM (LPC family) controllers. I was interfacing ST16C554D UART (a Startek Product) with LPC 21xx controller. I m initializing it properly in my C code. But due to some reason I was not getting results, Then I tried to write Initialization code for this external UART through LPC internal UA


Problem with LPC2366 and nichelite

Started by kumori0 in LPC20009 years ago 1 reply

Hello, I'm trying to make a simple tcp/ip application that forwards all data that it gets to a serial port. Opening the socket, getting ip via...

Hello, I'm trying to make a simple tcp/ip application that forwards all data that it gets to a serial port. Opening the socket, getting ip via dhcp works but when I try to close the socket with: if(receive[0] == '0') { while(socket_state) { socket_state = m_close(socket_test); } } I get the following: PC -> LPC PSH, ACK LPC -> PC FIN, ACK PC -> LPC ACK P


Special Function Registers for LPC 2214

Started by alagar prabhu in LPC200011 years ago 1 reply

Hi I am upgrading a Network Access Controller by using 32 bit ARM Microcontroller. I am using LPC 2214. can any one know about the...

Hi I am upgrading a Network Access Controller by using 32 bit ARM Microcontroller. I am using LPC 2214. can any one know about the special function registers in LPC 2214. Our older version controller is Dallas DS5000 which has some special function registers such TMOD, SMOD, TCON etc.... If any of you got the userguide & data book for LPC 2214. I already got the data sheet from phil...


LPC-H2148

Started by p_m_bair in LPC200010 years ago 5 replies

I am very new to the microcontroller world. I have an LPC-H2148, but haven't yet received my JTAG dongle, so I've been attempting to set...

I am very new to the microcontroller world. I have an LPC-H2148, but haven't yet received my JTAG dongle, so I've been attempting to set up the serial port bootloader interface from Sparkfun (http://www.sparkfun.com/commerce/product_info.php?products_id=714) without success. I've tried using both the Phillips Flash Utility and FlashMagic. I've removed the Debug jumper from the LPC-H2148. ...


LPC-Stick out of HiTop environment

Started by Xiaofan Chen in LPC200010 years ago

Just wondering if any person got LPC-Stick debugging support with OpenOCD or Keil or IAR (out of the HiTOP environment). LPC-Stick comes with...

Just wondering if any person got LPC-Stick debugging support with OpenOCD or Keil or IAR (out of the HiTOP environment). LPC-Stick comes with HiTOP 5.20 but it did not work under Vista. HiTOP 5.30 demo works under Vista but does not include LPC-Stick debugging support. It seems to me OpenOCD now supports STR9-comStick. Both LPC-Stick and STR9-comStick are using FTDI2232 as the debugging i...


Problems with linking to libnewlib-lpc.a

Started by Andreas Schwarz in LPC200014 years ago 3 replies

Hi, linking directly to the object files of newlib-lpc (as it is done in the example.mak) works perfectly, but linking to...

Hi, linking directly to the object files of newlib-lpc (as it is done in the example.mak) works perfectly, but linking to libnewlib-lpc.a doesn't (the elf file size differs by a few bytes and the program does not run correctly). My linker command line: arm-e


LPC-Link 2: Schematic, LPC4370 info?

Started by capiman26061973 in LPC20005 years ago 1 reply

Hello, just received a brand new LPC-Link 2. Does someone know where to get a schematic of the LPC-Link 2? There is a LPC4370 on this...

Hello, just received a brand new LPC-Link 2. Does someone know where to get a schematic of the LPC-Link 2? There is a LPC4370 on this board. I have not found much info about it in the Internet. According to numbering i would say, it is a flash-less part. Is this correct? What other things are there/not there compared to other LPC43xx parts? Best regards, Martin ----------------...


Where can I find olimex LPC-2478STK uCLinux cd?

Started by diego in LPC20007 years ago 7 replies

Hello there, I've recently acquired a LPC-2478 dev kit from IAR (containing a LPC-2478STK board from Olimex and a J-link from segger)...

Hello there, I've recently acquired a LPC-2478 dev kit from IAR (containing a LPC-2478STK board from Olimex and a J-link from segger) unfortunately it didn't come with the original documentation/uClinux + u-boot CD from Olimex. Since both uClinux and uboot are licensed under GPL I don't think I'm doing anything wrong by asking if anyone can provide me with the contents of the cd. It would be...