Hi, I just jump in the LPC2000 ARM world. I try LPC2103 for my entry point. I can not find LPC2103 in the device colom of LPC2000 flsh...

Hi, I just jump in the LPC2000 ARM world. I try LPC2103 for my entry point. I can not find LPC2103 in the device colom of LPC2000 flsh utility v2.2.3. I need a quick practical help. Thanks in advance. TR2000

HI All, I tried searching in the LPC2000 doc's - does anyone know where the NXP doc's state little endian for the LPC2000's? Thanks in...

HI All, I tried searching in the LPC2000 doc's - does anyone know where the NXP doc's state little endian for the LPC2000's? Thanks in advance. Joe --- In l...@yahoogroups.com, "Paul Curtis" wrote: > > It's fixed little-endian. No big-endian mode, sorry. > > -- Paul. > > > -----Original Message----- > > From: Leighton Rowe [mailto:leightonsrowe@...] > > Sent: 12 J

Hellow LPC2000 funs ). I introduce a LPC CMSIS2000 project for LPC2000 series. The goal of project is to make CMSIS like build...

Hellow LPC2000 funs ). I introduce a LPC CMSIS2000 project for LPC2000 series. The goal of project is to make CMSIS like build environment for LPC2000 series MCU. As you know there is official sources from NXP and ARM for new Cortex MCU. This sources is done with CMSIS standart, also there is Peripheral Library for Cortex family controllers.

Hello, I try to connect a enc28j60/ss to lpc2148 with SSP as SPI @ 15Mhz, but it fail to read/write with enc28j60. the enc28j60 is a little...

Hello, I try to connect a enc28j60/ss to lpc2148 with SSP as SPI @ 15Mhz, but it fail to read/write with enc28j60. the enc28j60 is a little hot! I search only find code for SPI0 :(. So I'd like to know is anyone here have any experiment to connect enc28j60 to SSP of lpc2000? Thanks. ======================================================================== Groups related to lpc2000 ...

Hello group, it is my first participation here and i am a beginner in programming MCUs LPC2000 family. I would like to know if MCU LPC2000...

Hello group, it is my first participation here and i am a beginner in programming MCUs LPC2000 family. I would like to know if MCU LPC2000 have a independent internal clock source like the MSP430 , PIC16F and others. I am using MCU NXP LPC2148 , i understand that the clock source for the CPU can be: 1) external clock / oscillator; 2) PLL output /CCLK ( derived from external oscillat...

Hi, I am interested in checking out some OrCAD libraries for LPC2000. Could someone please help me out. Thanks, Amit ...

Hi, I am interested in checking out some OrCAD libraries for LPC2000. Could someone please help me out. Thanks, Amit

Hello, has someone used one of NetChip's USB 2.0 controller with LPC2000 series (or any other uC) ? Is it working without...

Hello, has someone used one of NetChip's USB 2.0 controller with LPC2000 series (or any other uC) ? Is it working without problems ? What bandwidth can i reach in reality ? What is the rough price of these chips ? Regards, Martin

Hello Everyone, I am new to the microcontroller and am trying to understand it, i was reading up on PIC ucontrollers before and the book i...

Hello Everyone, I am new to the microcontroller and am trying to understand it, i was reading up on PIC ucontrollers before and the book i was reading emphasised on using Assembly language. I was recently advised to look at using the Philips lpc2148 to control an RC toy car (my first project) but i dont know much about the lpc2000 series and found out that it is programmed in C, so the infor...

Hello everyone, Would an LPC2000 device be fast enough to act as a voip interface (i.e. ethernet in one end, one channel of audio in/out at the...

Hello everyone, Would an LPC2000 device be fast enough to act as a voip interface (i.e. ethernet in one end, one channel of audio in/out at the other)? All the VOIP software stacks I can find seem to based on Linux so I presume it would have to run uclinux. It doesn't have much other work to do so can be pretty much dedicated to this task. If anybody has had any experiences in this area it...

Hi All I Know it is not an LPC2000 problem, but has anyone used an Analog Divices AD7708? . I apply a steady DC volatge to one of the inputs...

Hi All I Know it is not an LPC2000 problem, but has anyone used an Analog Divices AD7708? . I apply a steady DC volatge to one of the inputs and the reading decays while reading the ADC. When I very the input up and down the reading comes back up and decays. Can anyone help Regards Jean-Jacques

Dear lpc2000@lpc2..., I would like to use the LPC2148 for a C project, but I can't get any program to run on the processor. This is my...

Dear lpc2000@lpc2..., I would like to use the LPC2148 for a C project, but I can't get any program to run on the processor. This is my first time using the ARM microcontrollers. I am using the GNUARM toolchain with GCC to write and compile code and the Philips LPC2000 Flash Utility v2.2.2 to upload the hex files to the flash. I am using the IA

Hi, The new USB-to-UART chip from FTDI - FT232R - have now all the features of SiLabs' CP210X and one additional feature: 6/12/24/48...

Hi, The new USB-to-UART chip from FTDI - FT232R - have now all the features of SiLabs' CP210X and one additional feature: 6/12/24/48 MHz clock to drive an external microcontroller. So my questions are: 1. Is this clock can be used on LPC2000 instead of crystal? 2. If yes, how to connect it to LPC2000? To leave XOUT of

Salam, Urgent, I need help :-( I can't get uCOS-II work with IAR (for ARM) Can you please send any ready project that works with these boards...

Salam, Urgent, I need help :-( I can't get uCOS-II work with IAR (for ARM) Can you please send any ready project that works with these boards (or any LPC2000) MCB2100 MCB2130 Olimex LPC2129 I use IAR EWARM 4.31A Project at http://groups.yahoo.com/group/lpc200 0/files/uCOS-II/ Or Can you take look to my project and tell

Hi, is there any software for flash programming of LPC23xx like lpc2000 flash utility? i download version v2.2.3 but it doesn't include...

Hi, is there any software for flash programming of LPC23xx like lpc2000 flash utility? i download version v2.2.3 but it doesn't include lcp23xx. thanks.

I've just come across the Philips application note AN10438 "Philips LPC2000 CAN Driver", 02 March 2006. It describes "a project under KEIL...

I've just come across the Philips application note AN10438 "Philips LPC2000 CAN Driver", 02 March 2006. It describes "a project under KEIL uVision3, which is a live demo based on the LPC2000 CAN driver routines supplied as "C" source code." > From what I can see, the driver is much more complete than the AllCAN / FullCAN / BlinkyCAN examples available for download here. Please tell me h

try ebay i payed 55$ for an ulink2 on ebay ----- Original Message ----- From: Jorge Polar To: l...@yahoogroups.com Sent: Sunday,...

try ebay i payed 55$ for an ulink2 on ebay ----- Original Message ----- From: Jorge Polar To: l...@yahoogroups.com Sent: Sunday, July 10, 2011 6:45 PM Subject: [lpc2000] Debugger for Keil Hello friends, Does anybody knows if there is another HW debugger/emulator for the Keil and LPC2000/LPC1000 devices, besides the ULINK2 or ULINK-PRO? Something cheap...

Hello, I'm using the configuration below: LPC2294 using Phytec phyCORE Single Board Computer and emulator Keil under...

Hello, I'm using the configuration below: LPC2294 using Phytec phyCORE Single Board Computer and emulator Keil under Windows XP and LPC2000 Flash Utility v 2.2.0. When i press "Read Device ID" button, the program Flash Utility returns ano

Hello, My new laptop at work came with Windows 7 professional 32 bits. I installed =B5Vision and LPC2000 flash utility v2.2.3. (I also...

Hello, My new laptop at work came with Windows 7 professional 32 bits. I installed =B5Vision and LPC2000 flash utility v2.2.3. (I also installed free trial version of Hyperterminal since it has disappea= red in Windows 7. I don't know if it has anything to do with my problem). Anyway, Hex file upload to MCB2130 kit via ISP does not work. (Actually, it= works sometimes but it is very rare)...

I've noticed some sample lpc2000 linker scripts for the gnu tools I see on the internet have the memory defined something like this: MEMORY...

I've noticed some sample lpc2000 linker scripts for the gnu tools I see on the internet have the memory defined something like this: MEMORY { flash : ORIGIN = 0, LENGTH = 262143 /* FLASH ROM */ ram_isp_low(A) : ORIGIN = 0x40000120, LENGTH = 223 /* variables used by Philips ISP bootloader */ ram : ORIGIN = 0x40000200, LENGTH = 1...

I have a 2478 development board that I have been playing with, and it's nice to have an LCD controller built into the chip, but I was...

I have a 2478 development board that I have been playing with, and it's nice to have an LCD controller built into the chip, but I was wondering if it would be possible to drive a QVGA TFT screen directly from a different LPC2000 chip like a 2378 without an LCD controller (and ideally with a minimum of external components)? Obviously I need enough memory to use as a display memory map ...