LPC2xxx Programmer

Started by Nico Bollen in LPC200011 years ago 1 reply

Dear all, I'm searching for a programmer for the LPC2368 which can be used in a production environment (easy to use software, robust). Does...

Dear all, I'm searching for a programmer for the LPC2368 which can be used in a production environment (easy to use software, robust). Does one of you have any idea's for this? Many thanks in advance. Best regards, Nico ------------------------------------


CAN IN AUTO MOTIVES

Started by pbkumar4u in LPC20009 years ago 8 replies

I'am interested in developing a CAN Node and diagnose the Node using an LPC2XXX Board. Could any one help in this regard, how to design...

I'am interested in developing a CAN Node and diagnose the Node using an LPC2XXX Board. Could any one help in this regard, how to design a CAN Node and how it is going to communicate. ------------------------------------


ARM9..?

Started by James Dabbs in LPC200015 years ago 3 replies

Is there an ARM9 core in the LPC2XXX series' immediate future?

Is there an ARM9 core in the LPC2XXX series' immediate future?


LPC2xxx and fuzzy logic

Started by "M. Manca" in LPC200011 years ago 2 replies

Hi friends, anyone knows if is there a fuzzy logic library written in C/C++ freely available? I am also searching a visual development tool...

Hi friends, anyone knows if is there a fuzzy logic library written in C/C++ freely available? I am also searching a visual development tool (pssibly freeware or open source). ------------------------------------


ppp

Started by janek_szymanski in LPC200016 years ago 1 reply

I am looking for freely available code for ppp, which I can port to LPC2xxx. Any links would be appreciated. jan ...

I am looking for freely available code for ppp, which I can port to LPC2xxx. Any links would be appreciated. jan


eCos port for LPC2xxx?

Started by tikand2004 in LPC200016 years ago 1 reply

Hello! I'd like to use eCos for Philips microcontroller LPC2129? As I saw in eCos hardware support, it is not supported? Is...

Hello! I'd like to use eCos for Philips microcontroller LPC2129? As I saw in eCos hardware support, it is not supported? Is anyone create it? Thanks in advance! Andrew.


crosswork examples for Olimex LPC-H2214

Started by Herbert Larbie in LPC200014 years ago 2 replies

Hi, I am new to the lpc2xxx devices, does anyone have some crossworks examples for programming this device (led flashing that type of...

Hi, I am new to the lpc2xxx devices, does anyone have some crossworks examples for programming this device (led flashing that type of thing) that they could let me have. Thanks in advance. Herbert Larbie


1-wire driver

Started by carlochiesa78 in LPC200011 years ago 6 replies

I'm designing a new board with LPC2378/88 and I have to read the code inside a Maxim DS2401 chip using the 1-wire protocol. Which peripheral...

I'm designing a new board with LPC2378/88 and I have to read the code inside a Maxim DS2401 chip using the 1-wire protocol. Which peripheral is suggested for this type of communication? Any sample code is available for the LPC2xxx family? ------------------------------------


Off-list LPC2xxx CRP comments

Started by Danish Ali in LPC200014 years ago 1 reply

Hi Jaya, It really is sad that any discussion of CRP seems to descend into a slanging match. We all want to be able to use [microcontrollers]...

Hi Jaya, It really is sad that any discussion of CRP seems to descend into a slanging match. We all want to be able to use [microcontrollers] without having to worry about others finding out about our designs. For some people it is a case of national security. For others it is commercial and a monetary value can be imagined. (Whether it be to prevent someone from cloning ones product and...


Rowley output code

Started by mayotte_d in LPC200013 years ago 3 replies

Can someone please tell me how to get my Rowley crossarm lpc2xxx system that normally downloads on the jtag wiggler to output a hex file that...

Can someone please tell me how to get my Rowley crossarm lpc2xxx system that normally downloads on the jtag wiggler to output a hex file that can be used for downloading? I guess its somewhere in the linker but cant seem to find the option. I see all the interesting bootloading approaches but can't get this first step done. regards to all.


Re: Virtual USB project example for Keil

Started by Xavier Strong in LPC200012 years ago

Thanks for the interest John G - man I am stuck. The example seems to be targeted for a LPC2368 I am using an LPC2148. I don't know enough...

Thanks for the interest John G - man I am stuck. The example seems to be targeted for a LPC2368 I am using an LPC2148. I don't know enough about the LPC2368 do you think is will be compatible? If it is, other than chaning the target device and the include LPC2XXX.h should there be anthing else I would be concerned with - i.e. PCLK, or system clock? Thanks ----- Original Message ---...


Hierarchical State System?

Started by Chris in LPC200014 years ago 2 replies

Has anyone ported Miro Samek's hierarchical state system framework (from the book Practical Statecharts in C/C++) to the LPC2xxx who would...

Has anyone ported Miro Samek's hierarchical state system framework (from the book Practical Statecharts in C/C++) to the LPC2xxx who would be willing to share their code? - Chris Graham


J-Link - flash erasing

Started by arm_beta_tester in LPC200014 years ago 1 reply

Is there a possibility to erase the whole flash memory in LPC2xxx chip using the IAR J-LINK programmer/debugger with IAR EWARM? ...

Is there a possibility to erase the whole flash memory in LPC2xxx chip using the IAR J-LINK programmer/debugger with IAR EWARM?


GHS Integrity/Integrity-178B

Started by "M. Manca" in LPC20007 years ago 5 replies

Has anyone used Green Hills Integrity or Integrity-178B or similar Hard RTOS with LPC2xxx or LPC1xxx microcontroller...

Has anyone used Green Hills Integrity or Integrity-178B or similar Hard RTOS with LPC2xxx or LPC1xxx microcontroller families? Thanks. ------------------------------------


Re: Free LPC2xxx bootloader update tool

Started by tildesign2 in LPC200014 years ago 1 reply

Hi Jim, Can you please send an email to lpc@lpc@... so we can communicate with you directly. We really want to solve this problem and...

Hi Jim, Can you please send an email to lpc@lpc@... so we can communicate with you directly. We really want to solve this problem and help you out. best regards, Tjark --- In lpc2000@lpc2..., Jim Parziale wrote: > How do you get this utility to work? All I get is an error: > &qu


LP2000

Started by SANDEEP BAKSHI in LPC200015 years ago 1 reply

Hi All, Where can I get information about how write code for LPC2XXX family. I am new in this field and I am have Keil software. ...

Hi All, Where can I get information about how write code for LPC2XXX family. I am new in this field and I am have Keil software. Regards, Sandeep The Netherlands _________________________________________________________________ Talk with your online friends with MSN Messenger http:/


Re: J1939 stacks for the LPC2xxx's?

Started by andr...@... in LPC200014 years ago 15 replies

Anybody already found some J1939 code? I am working on my little hobby project to fool a trucks' speed limiter and I would...

Anybody already found some J1939 code? I am working on my little hobby project to fool a trucks' speed limiter and I would really appreciate it if anybody could give some help to start up with a LPC2129. I do have pretty much knowledge of SAE J1939, but my knowledge about embedded programming is not (yet) enough. Regards, Andr? The Neterla


Free LPC2xxx RTOS for non-commercial use

Started by kristianstad2001 in LPC200016 years ago 1 reply

Hello all, I've followed this group basically from the beginning and I've notices that a recurring question/subject is real-time...

Hello all, I've followed this group basically from the beginning and I've notices that a recurring question/subject is real-time operating systems. eCos is of course an interesting alternative, but as some of you have noted, the code size is rather large. This is true even i


optimum uart buffered transmit example?

Started by dr_danish_ali in LPC200014 years ago 5 replies

Hi Folks, I am very new to the lpc2xxx family (although I am competent at PICs) so I am looking at what other people do with the...

Hi Folks, I am very new to the lpc2xxx family (although I am competent at PICs) so I am looking at what other people do with the peripherals. My current line of investigation is the UARTs, which are described as "550-compatible". Of course I want everything i.e. interrupt-driven and externally-buffered serial input and output, but I don't seem to be


Re: JTAG RTCK / Jeeni question

Started by Samuel in LPC200014 years ago

Not sure is you know this but EPI has seized to support the Jeenie and recommend the Majic-LX, there is still some issues with the RTCK...

Not sure is you know this but EPI has seized to support the Jeenie and recommend the Majic-LX, there is still some issues with the RTCK when you init. the LPC2xxx, so you shoud be very careful when you write the startice.cmd. regards Samuel --- Rob Jansen wrote: > Does anyone have experience wi