ARM for beginner

Started by Eric in LPC200013 years ago 5 replies

I want to buy a starter kit or evaluation board for self learning on embedded system. Is the following a good one to start with? Can I compile...

I want to buy a starter kit or evaluation board for self learning on embedded system. Is the following a good one to start with? Can I compile and load linux into it? Thanks a lot http://www.embeddedartists.com/products/education/edu_base.php


Compiler

Started by meltronics group in LPC200013 years ago 4 replies

Hi, Can I know where can I download free Linux based or windows based ARM compiler for LPC2294. By, Meltronics ...

Hi, Can I know where can I download free Linux based or windows based ARM compiler for LPC2294. By, Meltronics __________________________________________________


LPC32xx (lpc)USB stack

Started by Marko Panger in LPC20009 years ago 3 replies

Hi all, I wanted to know if anybody is using a LPC32xx derivate (or any LPC3xxx) without any OS. I mean without Linux/WinCE. I'm particularly...

Hi all, I wanted to know if anybody is using a LPC32xx derivate (or any LPC3xxx) without any OS. I mean without Linux/WinCE. I'm particularly interested in knowing if the "lpcusb" can work also on LPC3xxx series ? Thanks, Marko ------------------------------------


Starting with LPC2468

Started by Kostas Alexis in LPC200011 years ago 4 replies

Hello there it is the first time i am trying to use an lpc. I have an LPC2468 with uC Linux on it and i want to start programming. Can...

Hello there it is the first time i am trying to use an lpc. I have an LPC2468 with uC Linux on it and i want to start programming. Can somebody tell me how to start. I also have KEIL ------------------------------------


Re: Need help with these stuff...

Started by Christian Klippel in LPC200012 years ago

hello again joel, Am Freitag, 5. Oktober 2007 01:38 schrieb Joel Winarske: > > ok ... i had it done by hand in a spreadsheet quite some time...

hello again joel, Am Freitag, 5. Oktober 2007 01:38 schrieb Joel Winarske: > > ok ... i had it done by hand in a spreadsheet quite some time ago, before > > i even knew about this list. and using linux, the win executable would > > have been of little value anyway ... > > Indeed. I need to implement a solution for this. > I have to say I have no plans to upgrade to Vista. > > Cheers,


Tutorial for beginner

Started by ferrara2020 in LPC20007 years ago 9 replies

Hi All, I have an ARM7 model LPC2368. I have installed Keil uVision4 with gcc compiler. I need tutorial or book for start to...

Hi All, I have an ARM7 model LPC2368. I have installed Keil uVision4 with gcc compiler. I need tutorial or book for start to programming. Moreover, I have a short question: Exist a linux embedded version for this processor?? Thanks in advance for replay. Cris ------------------------------------


Newlib build questions.

Started by stman_937 in LPC20009 years ago 1 reply

Hi, My platform is LPC2378. I use binutils 2.20, gcc 4.1.2 and newlib 1.18 on a Linux host. Does someone know how to build the newlib in...

Hi, My platform is LPC2378. I use binutils 2.20, gcc 4.1.2 and newlib 1.18 on a Linux host. Does someone know how to build the newlib in order to have sscanf and sprintf support? Thanks, Stephan. ------------------------------------


help in LPC2138 with UCOS-II

Started by willinocencio in LPC200012 years ago 5 replies

Hi I am using LPC2138 to project. How i can't use UClinux, i want to use UCOS-II, but there are documentation only Windows. I would like...

Hi I am using LPC2138 to project. How i can't use UClinux, i want to use UCOS-II, but there are documentation only Windows. I would like usee UCOS to Linux with drivers to network. help me ? Thanks, William


Recommended JTAG interface

Started by Anonymous in LPC200015 years ago 7 replies

Hi folks, Could someone recommend a suitable JTAG interface to use with Rowley's (Linux) IDE please? Preferably one someone's...

Hi folks, Could someone recommend a suitable JTAG interface to use with Rowley's (Linux) IDE please? Preferably one someone's actually used and knows works! ;-) Many thanks, Rob


LPC2468 SDRAM setup (again...)

Started by Marcel Boom in LPC200011 years ago 6 replies

Hello all, This is one of those topics that keep popping up. I have searched the newsgroup and found several threads on the topic (and tried...

Hello all, This is one of those topics that keep popping up. I have searched the newsgroup and found several threads on the topic (and tried them all, but still not working). I have a demonstration board of Olimex (LPC-E2468) which has a Samsung K4S281632F-TC75 SDRAM mounted. The example code uses uC Linux which I do not want to use (I am currently using IAR EWARM + powerpack). Can an...


New to microprocessor

Started by valis_eric_ykchan in LPC200014 years ago 6 replies

I'm new to microprocessor. I have a LPC2114 inserted on a RedHat 9.0 via Moschip PCI product. I have to make some communication between...

I'm new to microprocessor. I have a LPC2114 inserted on a RedHat 9.0 via Moschip PCI product. I have to make some communication between the programs on the chip and the linux. Can I simply use printf and scanf and "SWI" to communicate via the serial port? Thanks. Eric


new to lpc2000

Started by dannyngweekiat_85 in LPC200014 years ago 3 replies

Well just new to LPC2000. Just planning to switch to it. Can anyone help out with what i should get as a stater? I have use 8051 last time....

Well just new to LPC2000. Just planning to switch to it. Can anyone help out with what i should get as a stater? I have use 8051 last time. plan to Switch to this now. Wat should i get (programmer, guide, example etc)? btw i using a linux system


how to run ucos2 with gnu

Started by gingkotree2004 in LPC200015 years ago 1 reply

I want to run uCOSII on lPC2104. I can do it with ADS develop tools. Now I want do it wiht gnu in linux. I think someone must have...

I want to run uCOSII on lPC2104. I can do it with ADS develop tools. Now I want do it wiht gnu in linux. I think someone must have done it. Where can I find the source code? Any suggestion, please. Thanks.


Re: Non ISP firmware updating

Started by dine...@hcl.in in LPC200012 years ago

Hi, I also need to do a similar thing with LPC 2132. Iam trying with IAP commands. Could you please let me know if you already have a break...

Hi, I also need to do a similar thing with LPC 2132. Iam trying with IAP commands. Could you please let me know if you already have a break through. Thanks, Dinesh. > Hi, > > I am using LPC2103 for my project. I have my LPC2103 controlled > devices connected to Linux server over half-duplex communication. Each > device has its unique address on the network. I would like to update >


Re: Serial ISP mode with the IAR/OLIMEX LPC2148 under Linux ?

Started by mynk...@yahoo.com in LPC20009 years ago 1 reply

i am facing same issues. Error:Unable to sync to baud rate .... .... i m a newbie and as my college project i am trying to port a custom...

i am facing same issues. Error:Unable to sync to baud rate .... .... i m a newbie and as my college project i am trying to port a custom bootloader for NGX LPC2148. i dont know much about P0.14 but i know that there is no Jumper settings for that. Can anyone suggest me what to do, or tell me a good reference that can help. ------------------------------------


Re: graphic development for uCLinux on LPC2478

Started by Massimiliano Taccuso in LPC200011 years ago 2 replies

Thanks Don. I'm sorry but I started with Linux and LPC247x just few days ago and I don'= t have any experience. It seems that there are...

Thanks Don. I'm sorry but I started with Linux and LPC247x just few days ago and I don'= t have any experience. It seems that there are several possibilities -> I will try with Direct FB.= I hope that the MMU absence will not affect all these solutions -> probabl= y I have to use Nano-X or something like this... The second issue could be: is uCLinux=A0able to manage the TFT=A0Controll


ARM development board

Started by Pavan Kandepet in LPC200012 years ago

Hi Folks, I'm interested in running/porting Linux on an ARM development board. I wanted to know if there are any specific boards that...

Hi Folks, I'm interested in running/porting Linux on an ARM development board. I wanted to know if there are any specific boards that you would recommend? Also, how easy is it to debug and what extra peripherals would i need for this purpose? Cost is obviously a concern. Thanks for your help. -Pavan __________________________________________________


jtag debuggers

Started by Alex Gibson in LPC200016 years ago 2 replies

Been asked to ask a question (by some guys I've done some work for in the past) Does either keil u-link or IAR Jlink work...

Been asked to ask a question (by some guys I've done some work for in the past) Does either keil u-link or IAR Jlink work with insight or gdb for debugging ? Especially on linux or osx or bsd? Also Leon did you ever try that Chameleon pod that Amontec


GNU ARM Frontend (IDE)

Started by Felipe Fontoura in LPC200014 years ago 4 replies

Hi, would like to know if exists some IDE of development for GNU ARM (WinARM or GNU Toolchain)? Grateful to all -- Felipe...

Hi, would like to know if exists some IDE of development for GNU ARM (WinARM or GNU Toolchain)? Grateful to all -- Felipe Fontoura - Brazil Linux user: #281076


GCC & LPC2100

Started by Andreas Schwarz in LPC200016 years ago 1 reply

Hello, is there a howto for GCC + LPC2100? I have built binutils, gcc and newlib under linux, what else do I need to really use...

Hello, is there a howto for GCC + LPC2100? I have built binutils, gcc and newlib under linux, what else do I need to really use the compiler for LPC2106 software development? init code? Linker script? Where do I get it, how do I use it? Is there anything else I have to take ca