Forums Search for: Olimex
FreeRTOS vs Olimex OCD
Help! I am developing on an Olimex LPC2378-STK-A board via an Olimex ARM-USB-OCD using Eclipse IDE. The demo software from Olimex works fine...
Help! I am developing on an Olimex LPC2378-STK-A board via an Olimex ARM-USB-OCD using Eclipse IDE. The demo software from Olimex works fine over OpenOCD. I can download, set breakpoints, etc. My problem is that I am trying to build and download FreeRTOS over the same connection but the Eclipse project from FreeRTOS gags on the Olimex OCD. Transferring the FreeRTOS buld to the Olimex proj...
Schematic and documentation for Olimex LPC-P2378 board -- text hard to read
inI recently received an Olimex LPC-P2378 board (from Spark Fun) but I am having trouble reading the schematic from the Olimex site ...
I recently received an Olimex LPC-P2378 board (from Spark Fun) but I am having trouble reading the schematic from the Olimex site http://www.olimex.com/dev/pdf/LPC-P2378.pdf In particular, the text is difficult to read. I have tried it under several readers on Linux and also on both Adobe Acrobat 6 and 7 under W2K. Does anyone (especially Olimex?) have a text version of the connec...
Re: IAR with Olimex JTAG Devices
Hi Sark, The original post is quite old but if you're still around...Im attempting to use IAR with Olimex debugger. Can you please send me the...
Hi Sark, The original post is quite old but if you're still around...Im attempting to use IAR with Olimex debugger. Can you please send me the information needed for setting up GDB? Thanks. Hardeep I wanted to try IARs compiler to compare the output, and also because > many examples I've found on the web are written for IAR (notably > Olimex). Unfortunately, I'm not all that eager to
Olimex LPCE2294 Poor documentation and support.
inI am a newbie to this field. I recently procured an Olimex LPCE2294 Microcontroller Ethernet Rev B board. I tried uploading the test...
I am a newbie to this field. I recently procured an Olimex LPCE2294 Microcontroller Ethernet Rev B board. I tried uploading the test software given by them on their site. I could not do. I am really surprised to see such a poor documentation support and test program support form Olimex. Its definitely very hard for a newbie to work on such a kit. I also request Olimex support team to provide ...
Buying Olimex Products in the UK
inHi folks, Anyone in the UK bought anything from Olimex? The Olimex site points you to Taylec, but Taylec have no mention of the...
Hi folks, Anyone in the UK bought anything from Olimex? The Olimex site points you to Taylec, but Taylec have no mention of the ARM stuff on their web site, and no matter how many times you e-mail them they don't bother writing back! Of course, they have no phone
FreeRTOS on lpc2148 Olimex
inHello! I try FreeRTOS (in Files section on this group) with Olimex LPC-p2148. I use Eclipse Ganymede with Yagarto and OpenOCD (arm-usb-tiny...
Hello! I try FreeRTOS (in Files section on this group) with Olimex LPC-p2148. I use Eclipse Ganymede with Yagarto and OpenOCD (arm-usb-tiny Olimex). Why, when I compile the source, the makefile says: ------------------------------------------------------------------------ **** Build of configuration Default for project FreeRTOS_LPC2148 **** make all make: *** No rule to make target `all...
Re: Problems with olimex (wiggler) jtag and olimex
From: haare_in_der_dusche
From: haare_in_der_dusche
help regarding olimex lpc-l2294
inhi i am new to olimex lpc-l2294. can anyone send me any material regarding the olimex board like pindescription and introduction to eclipse....
hi i am new to olimex lpc-l2294. can anyone send me any material regarding the olimex board like pindescription and introduction to eclipse. Also plz send any sample programs so that i can see the functionalities of the board components like uart can etc thanx in advance gowtham
Olimex LPC-2478-STK USB
inHi All Just a word of warning to anyone developing USB on the Olimex LPC2478-STK. There are two circuit diagrams on the Olimex web site: -...
Hi All Just a word of warning to anyone developing USB on the Olimex LPC2478-STK. There are two circuit diagrams on the Olimex web site: - http://www.olimex.com/dev/images/ARM/LPC/LPC2478-STK-sch.gif and - http://www.olimex.com/dev/pdf/ARM/LPC/LPC-2478STK.pdf (the user's manual with a circuit diagram embedded in it) The first shows the USB device connector connected to U2D+/U2D- and US...
Re: Where can I find olimex LPC-2478STK uCLinux cd?
Hi, I have ...mmm...I had, I hope I will find a disk with original documentation, but I have bad Internet connection in this week. I can...
Hi, I have ...mmm...I had, I hope I will find a disk with original documentation, but I have bad Internet connection in this week. I can upload it somewhere (where?) on the next week. But maybe it makes sense to ask Olimex? SDRAM driver has a bug on my version, but it is possible to download correct driver from Olimex site. Best regards Vladimir ----- Original Message ----- From...
Where can I find olimex LPC-2478STK uCLinux cd?
inHello there, I've recently acquired a LPC-2478 dev kit from IAR (containing a LPC-2478STK board from Olimex and a J-link from segger)...
Hello there, I've recently acquired a LPC-2478 dev kit from IAR (containing a LPC-2478STK board from Olimex and a J-link from segger) unfortunately it didn't come with the original documentation/uClinux + u-boot CD from Olimex. Since both uClinux and uboot are licensed under GPL I don't think I'm doing anything wrong by asking if anyone can provide me with the contents of the cd. It would be...
Olimex LPC-L2294-8Mb dev board
Hi Has anyone purchased an Olimex LPC-L2294-8Mb board? Does anyone has the source code for the demo program that comes loaded with...
Hi Has anyone purchased an Olimex LPC-L2294-8Mb board? Does anyone has the source code for the demo program that comes loaded with board? If so, could I have a copy? I have contacted Olimex and my supplier and on reply so far. Regards Jean-Jacques ------------------------------------
Problem with OLIMEX JTAG
I've bought a Olimex JTAG and after having pacthed it (connected pin 8 & 15) O'm now able to connect to my LPC2138 with OCDRemote. But the ...
I've bought a Olimex JTAG and after having pacthed it (connected pin 8 & 15) O'm now able to connect to my LPC2138 with OCDRemote. But the problem is, that I'm only able to connect at speed 8, and when I try to debug, I keep getting errors and the debugging newer starts. Does anyone, have any experience with this Olimex Jtag/OCDRemote/GDB combo, especi
OLIMEX LPC2294 help..
hi all, I am working on olimex E2294 board under GNU GCC environment. but the code which I had written for IO toggling is not working on...
hi all, I am working on olimex E2294 board under GNU GCC environment. but the code which I had written for IO toggling is not working on the board. I am using eclipse IDE for it, In this same the target gets build there and also runs fine in debugger-mode(JTAG) but somehow its not working on the actual hardware. I also couldn't fond any sample test code on olimex's website for LPC E229...
Re: Olimex-USB-Tiny stopped working?
Hi, not being OpenOCD expert (I can check tomorrow with our guy who compile our OpenOCD CD) but on first sight you use wrong layout > ...
Hi, not being OpenOCD expert (I can check tomorrow with our guy who compile our OpenOCD CD) but on first sight you use wrong layout > 'ft2232' interface using libftdi with 'jtagkey' layout (15ba:0004) this is for JTAGKEY not OLIMEX layout > interface ft2232 > ft2232_device_desc "Olimex OpenOCD JTAG TINY" > #ft2232_layout olimex-jtag why commented? > ft2232_layout jtagkey
Seeking source for Olimex LPC-P2106 boards
inSeeking source for Olimex LPC-P2106 boards, short lead time. At least 10, prefer 20+ Olimex is closed in August for their 30 day annual...
Seeking source for Olimex LPC-P2106 boards, short lead time. At least 10, prefer 20+ Olimex is closed in August for their 30 day annual EU-style holiday. (grr, we Americans work too hard). ------------------------------------
Olimex LPC2478-STK LCD driver for Keil
inHello, I am working with Olimex's LPC2478-STK. I found IAR codes from Olimex web page. But there is no example for Keil. I want to know if anyone...
Hello, I am working with Olimex's LPC2478-STK. I found IAR codes from Olimex web page. But there is no example for Keil. I want to know if anyone runs the LCD with Keil uVision ? Regards. ------------------------------------
Getting OpenOCD running with Olimex ARM-USB-OCD & LPC-E2294 board
inHi, I am switching from Atmel AVR to LPC-22xx development and have to learn from scratch yet again ;( I am following James Lynch's tutorial...
Hi, I am switching from Atmel AVR to LPC-22xx development and have to learn from scratch yet again ;( I am following James Lynch's tutorial (Rev C) for getting up and running, but I am using the Olimex LPC-E2294 board. I am using the Olimex ARM-USB-OCD JTAG. I have successfully installed the Olimex ARM-USB-OCD drivers, OpenOCD 0.2, YAGARTO toolchain and Eclipse. The next step in the ...
Olimex-USB-Tiny stopped working?
inHi! I use an Olimex-usb-tiny Jtag debugger for my LPC-P2138 board, also from olimex. Recently I had some problems with my OS (Sabayon...
Hi! I use an Olimex-usb-tiny Jtag debugger for my LPC-P2138 board, also from olimex. Recently I had some problems with my OS (Sabayon linux), and had to reinstall it. After the reinstall, I can't get it to work. I suspect this might be because I changed from ftd2xx to libftdi and also use a newer openocd version... (I tried using ftd2xx but openocd won't compile with it) here are the...
Re: Virtual com port bootloader on Olimex LPC2148 board?
I have the Olimex 2148 dev board with the SD connector. When I boot up the board, some stuff comes over the USB com port about the...
I have the Olimex 2148 dev board with the SD connector. When I boot up the board, some stuff comes over the USB com port about the SD connector. I'm trying to figure out what's on the board (default from Olimex). I can't find the source code to what they ship on the board, nor any directions on what features the code has, what it does, how to use it, etc. etc. Can anyone point me in a d...